氧化亚铜微米晶的水热合成与生长机理

氧化亚铜是一种重要的P型半导体材料，目前因其独特的可见光催化性能在科研领域引起了广泛的重视。以CuSO4·5H2O为铜源，以α—D-葡萄糖为还原剂，并利用水热还原反应合成出了不同形貌的Cu2O微米晶。利用X射线粉末衍射分析（XRD）、透射电子显微镜（TEM）对合成的样品进行了形貌与结构的表征与分析。结果表明所合成的晶粒尺寸均匀且分散性好。讨论了不同条件下的晶粒生长机理，运用扩散机制与聚集机制解释了不同形貌的成因。     

Effects of Ti addition on low carbon hot strips produced by CSP process

Large quantity of fine Ti（C,N） particles, 15-30 nm in size, were observed in low carbon hot strips added to a small amount of Ti and produced by CSP process. The results showed that the precipitation of Ti（C,N） mostly took place during soaking and hot rolling, which is significantly different from that in the conventional production. These fine Ti carbonitride particles could be very effective on the austenite grain refinement by hindering grain growth of recrystallized austenite. Their precipitation behavior was discussed and compared with that of the steels produced in the conventional production.     

A spectral Integral method (SIM) for layered media

A spectral integral method is presented for electromagnetic scattering from dielectric and perfectly electric conducting (PEC) objects with a closed boundary embedded in a layered medium. Two-dimensional layered medium Green's functions are computed adaptively by using Gaussian quadratures. The singular terms in the Green's functions and the non-smooth terms in their derivatives are handled appropriately to achieve exponential convergence. Numerical results, compared with the ones obtained by using other methods, demonstrate the spectral accuracy and high efficiency of the proposed method. They also confirm that the spectral integral method (SIM) is applicable to concave objects.     

EMD方法在多光谱遥感图像融合中的应用

多光谱图像具有较高的光谱分辨率,而其空间分辨率比较低,致使融合后的多光谱图像空间细节的表现能力不足。为了克服这种融合图像空间细节表达能力差的问题,本文提出了用EMD(EmpiricalModeDecomposition)方法对多光谱图像进行分解,提取空间细节和纹理信息,并将其叠合到融合图像上的方法。实验表明:改善了视觉效果,提高融合图像的空间表达能力。     

基于CPS-20B1智能控制器的恒压变频供水系统

采用CPS-20B1智能型变频调速供水控制器和变频器的恒压供水的控制策略,并自动地调整泵组的运行台数和电机的转速。利用内置的PID控制器调节变频器的输出,实现闭环自动调节、恒压供水。运行结果表明,该控制系统在管网流量变化时具有稳定供水压力,工作可靠和节约电能显著等特点。     

双相机空间定位硬件系统的构成研究

本文针对交汇测量的工作原理，设计并具体实现了同步精度高，数据存储量大的测量系统，并详细介绍了该系统的硬件组成及各部分的工作原理和实现的功能，改进了现有系统工作方式的缺陷，解决了多台测量摄像机的同步工作和图像海量数据的存储难题，拓宽了此类系统的应用范围。     

Aspects of microstructure in low carbon steels produced by the CSP process

The solidification structure, microstructure evolution during rolling and precipitates with nanometers in dimension of the low carbon steels produced by CSP process with thin slabs have been studied in recent years. Important differences in microstructure and mechanical properties between the CSP products and the conventional one were observed. These differences may arise from the much rapider solidification rate and cooling rate after casting of the thin slabs. Some aspects of the microstructure for the low carbon steels of the CSP thin slabs are summarized and compared with the conventional one.     

Effect of spinel content on the properties of phosphoric acid bonded high alumina castables

In order to study the effect of fused spinel on the properties of phosphoric acid bonded high alumina castables, samples with different contents of fused spinel were prepared. The results show that when the contents of the fused spinel are between 8% and 16% (mass fraction), the castables have good properties. The castables overcome the shortages of the phosphoric acid bonded high alumina castables with bauxite cement as a hardening promoter. The experiments demonstrate that most of the service properties of the castables with fused spinel are better than those of the normal phosphoric acid bonded castables which use bauxite cement as a hardening promoter. The examination of the materials indicates that free MgO inclusions in the spinel powder can promote the hardening of the castables.     

常规变电站无人值班改造的几项关键技术

常规变电站正在无人值班改造，但在进行过程中，由于理解的不同，往往产生各种认部分和措施上的差异，使已改造的变电站运行并不理想，本文针对常规变电站在进行无人值班改造的几个关键技术进行分析，并提出相应的解决方法。     

混凝土结构剩余使用寿命的评估

主要就混凝土结构剩余使用寿命的评估的最新发展情况及实用方法做详细论述,并提出了自己的见解.