Tensile Properties and Failure Mechanism of a New 3D Nonorthogonal Woven Composite Material

Tensile properties and failure mechanism of a newly developed three-dimensional (3D) woven composite material named 3D nonorthogonal woven composite are investigated in this paper. The microstructure of the composite is studied and the tensile properties are obtained by quasi-static tensile tests. The failure mechanism of specimen is discussed based on observation of the fracture surfaces via electron microscope. It is found that the specimens always split along the oblique yarns and produce typical v-shaped fracture surfaces. The representative volume cell (RVC) is established based on the microstructure. A finite element analysis is conducted with periodical boundary conditions. The finite element simulation results agree well with the experimental data. By analyzing deformation and stress distribution under different loading conditions, it is demonstrated that finite element model based on RVC is valid in predicting tensile properties of 3D nonorthogonal woven composites. Stress distribution shows that the oblique yarns and warp yarns oriented along the x direction carry primary load under x tension and that warp yarns bear primary load under y tension.     

安全帽防静电性能测试影响因素的分析研究及不确定度的评定

依据JJF 1059-2012《测量不确定度表示与评定》,结合国家标准GB 2811-2007《安全帽》和GB/T 2812-2006《安全帽测试方法》在安全帽防静电性能的技术要求和测试方法的规定,分析并研究了安全帽防静电性能的影响因素及不确定度的来源,并对其不确定度进行了评定。     

In-situ synthesis of TiO2 nanostructures on Ti foil for enhanced and stable photocatalytic performance

TiO_2 nanostructures with strong interfacial adhesion and diverse morphologies have been in-situ grown on Ti foil substrate through a multiple-step method based on conventional plasma electrolytic oxidation(PEO) technology, hydrothermal reaction and ion exchange process. The PEO process is critical to the formation of TiO_2 seeding layer for the nucleation of Na_2Ti_3O_7 and H_2Ti_3O_7 mediates that are strongly attached to the Ti foil. An ion exchange reaction can finally lead to the formation of H_2Ti_3O_7 nanostructures with diverse morphologies and the calcination process can turn the H_2Ti_3O_7 nanostructures into TiO_2 nanostructures with enhanced crystallinity. The morphology of the TiO_2 nanostructures including nanoparticles(NP), nanowhiskers(NWK), nanowires(NW) and nanosheets(NS) can be easily tailored by controlling the NaOH concentration and reaction time during hydrothermal process. The morphology, composition and optical properties of TiO_2 photocatalysts were analyzed using scanning electron microscope(SEM), X-ray diffraction(XRD), photoluminescence(PL) spectroscopy and UV–vis absorption spectrum. Photocatalytic tests indicate that the TiO_2 nanosheets calcined at 500?C show good crystallization and the best capability of decomposing organic pollutants. The decoration of Ag cocatalyst can further improve the photocatalytic performance of the TiO_2 nanosheets as a result of the enhanced charger separation efficiency. Cyclic photocatalytic test using TiO_2 nanostructures grown on Ti foil substrate demonstrates the superior stability in the photodegradation of organic pollutant, suggesting the promising potential of in-situ growth technology for industrial application.     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

Erratum to: High-purity helical carbon nanotubes by trace-waterassisted chemical vapor deposition: Large-scale synthesis and growth mechanism

Nano Research - The first author, Fanbin Meng, and the second author, Ying Wang, contributed equally to this work was unfortunately forgotten to write on the first pages of the main text and the...     

Large capacitance and fast polarization response of thin electrolyte dielectrics by spin coating for two-dimensional MoS2 devices

Nano Research - A spin-coating method was applied to obtain thinner and smoother PEO/LiClO4 polymer electrolyte films (EFs) with a lower level of crystallization than those obtained using a...     

Entrapping multifunctional dendritic nanoparticles into a hydrogel for local therapeutic delivery and synergetic immunochemotherapy

Nano Research - Developing multifunctional nanoparticles to support new therapy models is a promising and challenging task to address the current dilemma on antitumor treatment. Herein, we...