Preparation of lightweight and hydrophobic natural biomass-based carbon aerogels for adsorption oils and organic solvents

Journal of Porous Materials - In the present work, an excellent carbon aerogel (PCA) with low density, hydrophobicity and porous structure has been successfully prepared by hydrothermal...     

Preparation of antimicrobial activated carbon fiber for adsorption

Journal of Porous Materials - Activated carbon fiber (ACF) is often used as efficient adsorption material for removal of contaminants from water. However, the propagation of microorganism on ACF...     

Synthesis of Polymer Nanospheres Conjugated Ce (IV) Complexes for Constructing Double Antibacterial Centers

Journal of Inorganic and Organometallic Polymers and Materials - The antimicrobial materials are rapidly emerging as a primary component in mitigation of bacterial pathogens, and functional...     

Fabrication of shish-kebab-structured carbon nanotube/poly(ε-caprolactone) composite nanofibers for potential tissue engineering applications

The electrospinning process was applied to fabricate the nanofibers of biodegradable poly(ε-caprolactone)(PCL) in which different contents of multiwalled carbon nanotubes(MWCNTs) were embedded. Afterward,the electrospun nanofibers were successfully decorated with shish-kebab structure via a self-induced crystallization technique. The topographical features and the mechanical properties of the composite scaffolds were characterized,and the biocompatibility of the material was assessed by using human osteogenic sarcoma osteoblasts(MG-63 cells). The carbon nanotube(CNT) concentration is found to affect the fiber diameter and mechanical properties of electrospun nanofibers and the periodic distance of the shish-kebab architecture. Cellular attachment and proliferation assays reveal that 0.5 wt% CNT-embedded PCL scaffold shows enhanced biocompatibility with MG-63 cells than their counterparts made of neat PCL, and the collagen-like nanotopology provided by the shish-kebab structure further facilitates the cell adhesion and proliferation. The superior interactions between cells and scaffolds demonstrate that the shish-kebab-structured CNTs/PCL nanofibers may be promising candidate for tissue engineering scaffold application.     

Effect of Rotational Speed on Microstructure and Mechanical Properties of 2060 Aluminum Alloy RFSSW Joint

Metals and Materials International - Refill friction stir spot welding (RFSSW) is used to weld 3.2-mm-thick 2060 aluminum alloy sheets. In this study, we investigated the formation, microstructures...     

光固化树脂砂轮层间结合强度研究

阐述了利用分层堆积制造技术进行新型光固化树脂砂轮的制造工艺,分析了砂轮层间结合强度,提出了改善砂轮层间结合强度的有效措施,即在树脂中添加磁性颗粒,经磁场的作用,使单层固化表面粗糙,增强层间结合强度,通过对不同磁场强度下的层间结合强度测试,结果表明,该方法对层间结合强度的改善有显著的作用.     

百万千瓦级核电站轴封型主泵整机集成试验验证优化方案研究

为确保主泵的安全性和可靠性,主泵整机在完成集成设计后需通过试验进行验证。文中介绍了主泵设计与验证的总体思路,提出了主泵工程样机需开展的整机试验项目。基于已有的试验条件,进行了主泵整机集成试验验证方案的优化和可行性分析。分析结果表明,在充分开展主泵各模块、子模块、部件和材料的试验与分析的基础上,可采用小流量试验方案进行主泵整机集成试验验证。     

次临界反应性测量方法研究

压水堆启动前需要进行物理启动试验,其中调临界是相对耗时的一部分。采用次临界条件下的试验,可以省去调临界的步骤,提高物理启动试验的安全性和适用性,加速物理启动试验的进程,提高压水堆的负荷因子。目前,次临界反应性测量受限于测量信号较弱,背景噪声强,误差较大,难以满足商用压水堆的工程应用要求。本文基于源倍增方法,利用空间重要性修正因子和信号线性修正提高次临界反应性测量的精度,成功地在核电厂首循环上实现了次临界反应性测量的蒙特卡罗方法计算,取得了较好的计算精度与效果。