Implementation of a C1 triangular element based on the P-version of the finite element method

The implementation of a computer code CONE (for C¹ continuity) based on the p-version of the finite element method is described. A hierarchic family of triangular finite elements of degree p ≥ 5 is used. This family enforces C¹-continuity across inter-element boundaries, and the code is applicable to fourth order partial differential equations in two independent variables, in particular to the biharmonic equation. Applications to several benchmark problems in plate bending are presented. Sample results are examined and compared both with theoretical predictions and with the computations of other programs. Significant improvements are shown for the results obtained using CONE.     

Large-deformation analysis of nonlinear elastic fluids

A computational analysis was undertaken of four nonlinear generalizations of the simple Maxwell viscoelastic fluid under conditions of large deformations. The four fluids are named the upper convected Maxwell, lower convected Maxwell, Jaumann and Dong-Skalak-Sung fluids. Each of them is characterized by two material parameters, a shear modulus and a time constant and each reduces to the simple Maxwell fluid in the case of small, slow deformations. The finite element program ADINA was adapted to compute the mechanical responses of these materials to imposed surface displacements of various types. Our algorithm was based on the equality (for an incompressible material) of the components of the second Piola-Kirchhoff stress with respect to material coordinates and those of the Cauchy stress with respect to convected coordinates. After evaluating the algorithm's accuracy with respect to a limited set of available analytic solutions, the responses to indentation by a rigid, sharp-edged cylinder of a half-space composed of each of the four nonlinear fluids were computed. These calculations included a wide range of indentation speeds, covering the spectrum of material behavior from viscous fluid to hyperelastic solid. The computations admitted large indentations—up to six indenter radii in special cases. In contrast to their radically different behaviors when subjected to large homogeneous deformations, all four materials exhibited similar behaviors when subjected to deep indentations. For any specific choice of material and computational parameters, the computation terminated if the indentation became too deep and the magnitude of this maximum achievable indentation depth decreased with increasing mesh refinement.     

Thermogravimetric/mass spectrometric characterization of the thermal decomposition of (4-O-methyl-D-glucurono)-D-xylan

A thermogravimetric/mass spectrometric (TG/MS) system was used to characterize the thermolysis reactions of (4-O-methyl-D -glucurono)-D -xylan. The mass spectrometric peaks, measured as function of time, were attributed to water, methanol, carbon monoxide, carbon dioxide, formaldehyde, formic acid, acetic acid, acetone, acrolein, 2-furaldehyde, and 3-hydroxy-2-penteno-1,5-lactone. The time derivative of the thermogravimetric curve (DTG) consisted of two partially overlapping peaks, indicating a multistep mechanism. The mass spectrometric intensities of the peaks assigned to methanol and 2-furaldehyde coincided with the first DTG peak, suggesting that the first DTG peak represents both dehydration and fragmentation pathways. Methanol, water, formyl group, and carbon dioxide contributed to both of the DTG peaks. This indicates that the dehydration, decarboxylation, and decarbonylation took place in two steps. The compounds observed only in the second DTG peak and later (acetone, formic acid, formaldehyde, acrolein, acetic acid, and 3-hydroxy-2-penteno-1,5-lactone) are probably products of reactions which occur after the collapse of the original polysaccharide structure.     

Intermittent versus continuous administration of 1,25-dihydroxyvitamin D3 in experimental renal hyperparathyroidism

Conflicting results have been reported regarding the efficacy of intermittent versus continuous administration of 1,25(OH)2D3 in renal secondary hyperparathyroidism. To address this issue we examined sham-operated control rats and hyperparathyroid rats with subtotal (5/6) nephrectomy (Nx). The Nx animals (20 to 22 animals per group) were subjected to three treatment protocols: (i) solvent treatment (Nx-solvent); (ii) two i.p. injections of 35 pmol 1,25(OH)2D3 on days 0 and 4 (Nx-bolus); and (iii) continuous infusion of 70 pmol 1,25(OH)2D3 over six days via osmotic minipump (Nx-infusion). All measurements were performed six days after start of treatment. As compared to sham-operated controls, the pre-pro-PTH/beta-actin mRNA ratio was 2.04-fold higher in Nx-solvent. Both modes of administration of 1,25(OH)2D3 resulted in inhibition of PTH mRNA concentrations relative to Nx-solvent. The pre-pro-PTH/beta-actin mRNA ratio was, however, significantly lower (P < 0.05) in Nx-bolus than in Nx-infusion (Nx-bolus 1.26 higher than sham-operated controls; Nx-infusion 1.65 higher than sham-operated controls). Aminoterminal PTH (N-PTH) serum concentrations were higher in Nx-solvent (52 +/- 4 pg/ml) than in sham-operated controls (32 +/- 3 pg/ml, P < 0.01). N-PTH concentrations in Nx-bolus (38 +/- 4 pg/ml) were significantly lower than in Nx-solvent (P < 0.01) and in Nx-infusion (46 +/- 4 pg/ml, P < 0.05). Parathyroid gland weight (microgram/g body wt) was higher in Nx-solvent (1.30 +/- 0.08 pg/ml) than in sham-operated controls (0.79 +/- 0.04 pg/ml, P < 0.02).(ABSTRACT TRUNCATED AT 250 WORDS)     

A survey of total hydrocyanic acid content in ready-to-eat cassava-based chips obtained in the Australian market in 2008

Cassava (Manihot esculenta Crantz) is a widely consumed food in the tropics that naturally contains cyanogenic glycosides (cyanogens, mainly composed of linamarin, acetone cyanohydrin, and hydrocyanic acid). If cassava is not adequately processed to reduce the level of cyanogens prior to consumption, these compounds can lead to the formation of hydrocyanic acid in the gut. Exposure to hydrocyanic acid can cause symptoms ranging from vomiting and abdominal pain to coma and death. In 2008, a survey of ready-to-eat (RTE) cassava-based snack foods was undertaken to determine levels of cyanogens measured as total hydrocyanic acid. This survey was undertaken in response to the New South Wales Food Authority being alerted to the detection of elevated levels of cyanogens in an RTE cassava-based snack food. This survey took 374 samples of RTE cassava chips available in the Australian marketplace. Significant variation in the levels of total hydrocyanic acid were observed in the 317 samples testing positive for cyanogens, with levels ranging from 13 to 165 mg of HCN equivalents per kg (mean value, 64.2 mg of HCN eq/kg for positive samples). The results from this survey serve as a timely warning for manufacturers of RTE cassava chips and other cassava-based snack foods to ensure there is tight control over the levels of cyanogens in the cassava ingredient. Evidence from this survey contributed to an amendment to the Australia New Zealand Food Standards Code, which now prescribes a maximum level for hydrocyanic acid in RTE cassava chips of 10 mg of HCN eq/kg, which aligns with the Codex Alimentarius Commission international standard for edible cassava flour.     

Linear equality constraints in finite element approximation

The typical numerical problem associated with finite element approximations is a quadratic programming problem with linear equality constraints. When nodal variables are employed, the coefficient matrix of the constraint equations, [ A ], acquires a block-diagonal structure. The transformation from polynomial coefficients to nodal variables involves finding a basis for [ A ] and computing its inverse. Simultaneous satisfaction of completeness and C¹ (or higher) continuity requirements establishes linear relationships among the nodal variables and precludes inversion of the basis by exclusively element-level operations. Linear dependencies among the constraint equations and among the nodal variables can be evaluated by the simplex method. The computational procedure is outlined.     

Biomass energy in Vojvodina: Market conditions,environment and food security

In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe.Vojvodina is an energy-deficient province. Vojvodina also has a large potential for renewable energy, especially energy from biomass (biodiesel and bio-ethanol). The lack of knowledge about renewable energy technologies by most policy-makers, potential consumers, and energy firm managers has played against renewable energy developments. The environmental impacts of programs that encourage biofuel production, farmland land requirements and the impacts on food production are also discussed, considering the life cycle analysis (LCA) as a tool.It is concluded that the rise in the use of biofuels is inevitable and that international cooperation, regulations and certification mechanisms must be established regarding the use of land, the mitigation of environmental and social impacts caused by biofuel production. It is also mandatory to establish appropriate working conditions and decent remuneration for workers of the biofuels production chain.     

Simultaneous biohydrogen production and wastewater treatment based on the selective enrichment of the fermentation ecosystem

Biohydrogen production from synthetic wastewater as substrate was studied in anaerobic small scale batch reactors. Enriched anaerobic mixed consortia sampled from various environments were used as parent inocula to start the bioreactors. Selective enrichments were achieved by various physical and chemical pretreatments and changes in the microbial communities were monitored by metagenomic and molecular diagnostics approaches. Experimental data showed the feasibility of biohydrogen production using synthetic wastewater as substrate. The hydrogen generation capability of the different mixed consortia is clearly dependent on the pretreatment methods. The described approach opens the possibility for an alternative way towards simultaneous wastewater treatment and renewable energy generation.     

Positron emission tomographic evidence of toxic effect of MDMA ("Ecstasy") on brain serotonin neurons in human beings

BACKGROUND: (+/-)3,4-methylenedioxymethamphetamine (MDMA, "Ecstasy") is a popular recreational drug that selectively damages brain serotonin (5-HT) neurons in animals at doses that closely approach those used by humans. We investigated the status of brain 5-HT neurons in MDMA users. METHODS: We enrolled 14 previous users of MDMA who were currently abstaining from use and 15 controls who had never used MDMA. We used positron emission tomography (PET) with the radioligand carbon-11-labelled McN-5652, which selectively labels the 5-HT transporter. We analysed whether there were differences in 5-HT transporter binding between abstinent MDMA users and participants in the control group. Blood and urine samples were taken and tested to check for abstinence. FINDINGS: MDMA users showed decreased global and regional brain 5-HT transporter binding compared with controls. Decreases in 5-HT transporter binding positively correlated with the extent of previous MDMA use. INTERPRETATION: Quantitative PET studies with a ligand selective for 5-HT transporters can be used to assess the status of 5-HT neurons in the living human brain. We show direct evidence of a decrease in a structural component of brain 5-HT neurons in human MDMA users.