The effect of scale and interfacial tension on liquid–liquid dispersion in in-line Silverson rotor–stator mixers

The effect of scale, processing conditions, interfacial tension and viscosity of the dispersed phase on power draw and drop size distributions in three in-line Silverson rotor–stator mixers was investigated with the aim to determine the most appropriate scaling up parameter. The largest mixer was a factory scale device, whilst the smallest was a laboratory scale mixer. All the mixers were geometrically similar and were fitted with double rotors and standard double emulsor stators. 1 wt.% silicone oils with viscosities of 9.4 mPa s and 339 mPa s in aqueous solutions of surfactant or ethanol were emulsified in single and multiple pass modes. The effect of rotor speed, flow rate, dispersed phase viscosity, interfacial tension and scale on drop size distributions was investigated.     

Optimal control of convective drying of saturated porous materials

Numerical simulations of optimal control applied to saturated capillary‐porous materials subjected to convective drying are presented. The optimization process is concerned with such drying parameters as drying rate, energy consumption, and product quality. The thermo‐hydro‐mechanical model of drying is developed to describe the kinetics of drying and to determine the drying‐induced stresses which are responsible for damage of dried products. The effective and the admissible stresses are defined and used to formulate the Huber‐von Mises–Hencky strength criterion enabling assessment of possible material damage. The method of genetic algorithm is used for operation with drying conditions in such a way as to ensure minimum energy consumption and to get the effective stress less than the strength of dried material, and thus, to preserve a good quality of dried products at possibly high drying rate. Numerically simulated optimal drying processes are illustrated on the examples of finite dimensions of kaolin‐clay cylinders subjected to convective drying. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4846–4857, 2013     

STRESSES IN VISCOELASTIC PLATE DRIED CONVECTIVELY

ABSTRACT

The deformations and drying-induced stresses in a saturated porous plate insulated on one side and dried convectively on the others were analysedPlate material is assumed to be elastic and viscoelastic. A rigorous solution of the problem is presented using Laplace transformations and the method of variable separation. The results are presented in the form of a series resulting from the solution of a Sturm-Liouville problem. The shrinkage stresses in the plate are caused by non-uniform distribution of the moisture content. The thermal stresses are not included as the consideration were confined to only constant rate drying period.     

SIMULATION OF RF-ASSISTED CONVECTCVE DRYING FOR SEED QUALITY BROAD BEAN

Based on experimental data and analysis of the heat and mass transfer mechanism, a semi-empirical model for dielectrically-assisted convective drying of shrinkable and hygroscopic materials with internal resistance to mass flow has been derived and used to simulate radio-frequency drying of the seed quality broad bean (Vicia Faba)¹.     

Characterization of Terebinth Fruit Oil and Optimization of Acidolysis Reaction with Caprylic and Stearic Acids

Characterization of the fatty acid and triacylglycerol composition of terebinth fruit oil and the synthesis of structured lipids (SL) were performed in this study. Interesterification reaction of terebinth fruits oil (Pistacia terebinthus L.) with caprylic acid (CA) and stearic acid (SA) to produce a SL was performed in n-hexane using immobilized sn-1,3 specific lipase from Mucor miehei. The effect of reaction conditions and relationship among them were analyzed by response surface methodology (RSM) with a four-factors five-level central composite rotatable experimental design. The four major factors chosen were enzyme load (10–30 wt% based on substrates), reaction time (7–18 h), reaction temperature (40–60 °C) and substrate mole ratio (terebinth oil:SA:CA 1:1:1–1:1:3). The best fitting quadratic model was determined by regression and backward elimination. Based on the fitted model, the optimal reaction conditions for the incorporation of CA and SA were found to be temperature 50 °C; time 18 h; enzyme load 30 wt%; substrate ratio 1:1:3. Under these optimum conditions, the incorporation of SA and CA could be obtained as 19 and 14%, respectively.     

Expression for turbulent power draw of an in-line Silverson high shear mixer

We report the validation of an expression to accurately describe the power draw of an in-line rotor–stator mixer over a range of flow rates and rotor speeds. The expression consists of a term which reflects the power required to rotate the shaft in response to the liquid resistance and a term to reflect the power convected away from the mixing chamber. A specially commissioned high speed (12,000 rpm), instrumented 150/250 MS Silverson mixer has been developed with power draw determined from both torque and calorimetric measurements. Experiments are carried out using water over a range of independently controlled flow rates and rotor speeds with losses for both techniques carefully accounted for. For the torque measurement the value of the constants for the two terms above are Po_z=0.197 and k₁=9.35, respectively. For the calorimetric technique the measured temperature rise was similar to some of the corrections and losses over a significant range of the experimental space but nevertheless with careful experimentation constants similar to those for the torque technique were obtained, Po_z=0.229 and k₁=7.46. Allowing the calibration of the temperature probes to be a fit parameter in the regression routine increased the value of k₁=8.10 but did not affect the value of Po_z. A simple graphical method is also proposed using a dimensionless form of the expression which yielded slightly higher value of Po_z but a slightly lower value of k₁. The accuracy of both measurement techniques improves with rotor speed and the differences between the constants is attributed to the better accuracy of the torque technique at higher flow rates whereas the calorimetric technique is more accurate at low flow rates where the temperature rise is larger. Several repeats of the calorimetric technique with a reduced set of experimental points show good reproducibility. Finally at low flow rates (<10% of the maximum) the power unexpectantly increases and a modification to the expression is proposed by considering the pumping efficiency.     

Electrostrictive properties of ceramics obtained on the basis of ferroelectrk relaxors

We present the results for search of the best ceramic materials for electrostrictive transducers. We performed the following investigations: (1) investigation of different types of ferroelectric, antiferroelectric and non-polar complex oxides with perovskite (OPS) and tetragonal tungsten bronze (TBS) structures; (2) the investigations of the OPS with different degrees of the cations ordering; (3) the measurements of the electrostrictive coefficient Q, Curie-Weiss constant C_W, coefficient of linear thermal expansion λ, polarization P and dielectric permittivity ^σ_r; (4) the X-ray analysis of the structure. The electrostrictive deformation may be very high and the relative strain can be of the order 10^-3 in such materials.     

Metallocenyl 7-ACA Conjugates: Antibacterial Activity Studies and Atomic-Resolution X-ray Crystal Structure with CTX-M β-Lactamase

The conjugation of organometallic groups to current β-lactam antibiotics is a field of increasing study due to the ability of certain organometallic groups to enhance the antibiotic potency of these drugs. Herein, we report the antibacterial properties of two metallocenyl (ferrocenyl and ruthenocenyl) 7-aminocephalosporanic acid (7-ACA) antibiotic conjugates. Continuing a trend we found in our previous studies, the ruthenocenyl conjugate showed greater antibacterial activity than its ferrocenyl counterpart. Compared with the previously published 7-aminodesacetoxycephalosporanic acid (7-ADCA) conjugates, the 3-acetyloxymethyl group significantly improved the compounds’ activity. Furthermore, the Rc-7-ACA compound was more active against clinical Staphylococcus aureus isolates than the ampicillin reference. Noticeably, neither of the two new compounds showed an undesirable toxic effect in HeLa and L929 cells at the concentrations at which they displayed strong antibacterial effects. The antibacterial activity of the two metallocenyl 7-ACA derivatives was further confirmed by scanning electron microscopy (SEM). SEM micrographs showed that bacteria treated with metallocenyl 7-ACA derivatives feature cell wall damage and morphology changes. Using a CTX-M-14 β-lactamase competition assay based on nitrocefin hydrolysis, we showed that the Rc-7-ACA bound more favorably to CTX-M-14 than its ferrocenyl counterpart, again confirming the superiority of the ruthenocenyl moiety over the ferrocenyl one in interacting with proteins. We also report a 1.47 Å resolution crystal structure of Rc-7-ACA in complex with the CTX-M-14 E166A mutant, an enzyme sharing a similar active site configuration with penicillin-binding proteins, the molecular target of β-lactam antibiotics. These results strengthen the case for the antibacterial utility of the Rc and Fc groups.     

Ultrasonic-Assisted Osmotic Dehydration of Carrot Followed by Convective Drying with Continuous and Intermittent Heating

The aim of the studies was to analyze the effect of ultrasound action on osmotic pretreatment and then on drying kinetics in continuous and intermittent drying conditions, and on the final product quality. This article presents the results of intermittent-convective drying of carrot preceded by ultrasonic assisted osmotic dehydration in fructose aqueous solutions. The theoretical drying kinetics developed from the numerical solution of mathematical model is validated using the experimental data. It has been shown that combination of ultrasonic assisted osmosis with intermittent-convective drying accelerates the drying process and improves the quality of dried biomaterial. A good adherence of the numerically determined kinetic curves confirms the usefulness of the presented model and its possible application to construction of controlled and optimized drying processes.     

[Carboxyl‐11C]Labelling of Four High‐Affinity cPLA2α Inhibitors and Their Evaluation as Radioligands in Mice by Positron Emission Tomography

Cytosolic phospholipase A2α (cPLA2α) may play a critical role in neuropsychiatric and neurodegenerative disorders associated with oxidative stress and neuroinflammation. An effective PET radioligand for imaging cPLA2α in living brain might prove useful for biomedical research, especially on neuroinflammation. We selected four high‐affinity (IC₅₀ 2.1–12 nm ) indole‐5‐carboxylic acid‐based inhibitors of cPLA2α, namely 3‐isobutyryl‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 1 ); 3‐acetyl‐1‐(2‐oxo‐3‐(4‐(4‐(trifluoromethyl)phenoxy)phenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 2 ); 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 3 ); and 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(3‐(4‐octylphenoxy)‐2‐oxopropyl)‐1H‐indole‐5‐carboxylic acid ( 4 ), for labelling in carboxyl position with carbon‐11 (t_1/2=20.4 min) to provide candidate PET radioligands for imaging brain cPLA2α. Compounds [¹¹C] 1 – 4 were obtained for intravenous injection in adequate overall yields (1.1–5.5 %) from cyclotron‐produced [¹¹C]carbon dioxide and with moderate molar activities (70–141 GBq μmol^?1) through the use of Pd⁰‐mediated [¹¹C]carbon monoxide insertion on iodo precursors. Measured logD_7.4 values were within a narrow moderate range (1.9–2.4). After intravenous injection of [¹¹C] 1 – 4 in mice, radioactivity uptakes in brain peaked at low values (≤0.8 SUV) and decreased by about 90 % over 15 min. Pretreatments of the mice with high doses of the corresponding non‐radioactive ligands did not alter brain time–activity curves. Brain uptakes of radioactivity after administration of [¹¹C] 1 to wild‐type and P‐gp/BCRP dual knock‐out mice were similar (peak 0.4 vs. 0.5 SUV), indicating that [¹¹C] 1 and others in this structural class, are not substrates for efflux transporters.