Very Large Photoconduction Enhancement Upon Self‐Assembly of a New Triindole Derivative in Solution‐Processed Films

A new carbazole‐related small molecule exhibiting self‐assembly into ordered nanostructures in solution‐processed cast films has been synthesized and its charge‐photogeneration and ‐transport properties have been investigated. Large photoconductivity was measured in the amorphous state while an enormous improvement in the photoconduction properties was observed when the molecules spontaneously organized. Photocurrents increased upon self‐assembly by up to four orders of magnitude, mostly due to the drastic enhancement of the charge photogeneration. A greatly favorable arrangement of the aromatic cores in the resulting nanostructures, which were characterized by X‐ray analysis, may explain these improvements. Photocurrents of mA cm^?2, on/off ratios of 10⁴ and quantum efficiencies of unity at low field and light intensity, which are among the best values reported to date, along with the simplicity of fabrication, give this readily‐available organic system great potential for use in plastic optoelectronic devices.     

Nanocrystalline Metal Oxides from the Injection of Metal Oxide Sols in Coordinating Solutions: Synthesis,Characterization, Thermal Stabilization,Device Processing,and Gas‐Sensing Properties

Metal oxide (SnO₂, TiO₂, In₂O₃, ZnO) sols are prepared by various sol–gel processes in such a way as to hinder the condensation reactions. The obtained sols are injected at 160 °C into a solution of tetradecene and dodecylamine, and kept under heating for different periods of time. Depending on the starting sol, variously crystallized oxide nanoparticles are obtained, whose phase compositions and chemical structure have been studied by X‐ray diffraction (XRD) and Fourier transform IR spectroscopy. The elimination of the organic residuals has been carried out by thermal treatment, and the thermal evolution of the nanoparticles has been studied by thermal analyses and Raman spectroscopy. High‐resolution transmission electron microscopy studies coupled with XRD measurements show that the thermal treatment does not markedly affect the particle size, which remains in the nanometer‐sized regime (from 3.5 to 8.5 nm, depending on the system), except in the case of ZnO. The thermally purified and stabilized powders, drop‐coated onto alumina substrates with pre‐deposited electrical contacts, have been tested as gas‐sensing devices, displaying outstanding sensing properties even at room temperature.     

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

Criterion for signal extraction in underdetermined mixtures of bounded support

This work studies the problem of recovering a complex signal (source) from an underdetermined linear mixture of bounded sources. We assume some a priori information of the desired signal in the form of a training sequence and complete absence of knowledge from the other sources, except for their bounded character. The main contribution of this letter is the proposal of a bounded component analysis of the training error that tries to condense the relevant information of the observations in a linear estimate of the desired signal. This subspace can be later used for subsequent refined estimation of the signal of interest. Simulations corroborate the good performance of the proposed method in high SNR scenarios.     

Toward the Optimized Spintronic Response of Sn‐Doped IrO2 Thin Films

Amorphous and polycrystalline Sn‐doped IrO₂ thin films, Ir_1‐xSn_xO₂, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO₂ can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn‐doped samples.     

Synergistic Computational‐Experimental Approach to Improve Ionene Polymer‐Based Functional Hydrogels

The manifold applications of ionene‐based materials such as hydrogels in daily life, biomedical sciences, and industrial processes are a consequence of their unique physical and chemical properties, which are governed by a judicious balance between multiple non‐covalent interactions. However, one of the most critical aspects identified for a broader use of different polyelectrolytes is the need of raising their gelation efficiency. This work focuses on surfactant‐free ionene polymers 1 ? 3 containing DABCO and N,N′‐(x‐phenylene)dibenzamide (x = ortho‐/meta‐/para‐) linkages as model systems to develop a combined computational‐experimental approach to improve the hydrogelation through a better understanding of the gelation mechanism. Molecular dynamics simulations of isomeric ionenes 1–3 with explicit water molecules point out remarkable differences in the assembly of the polymeric chains in each case. Interchain regions with high degree of hydration (i.e., polymer···water interactions) and zones dominated by polymer···polymer interactions are evident in the case of ortho‐ ( 1 ) and meta‐ ( 2 ) isomeric ionenes, whereas domains controlled by polymer···polymer interactions are practically inexistent in 3 . In excellent agreement, ortho‐ionene 1 provides experimentally the best hydrogels with unique features such as thixotropic behavior and dispersion ability for single‐walles carbon nanotubes.     

Fabrication,characterization, and analysis of photodetectors metal-porous silicon with different geometry and thickness of the porous silicon layer

Porous silicon photodetectors obtained by electrochemical etching of p-type non-polished crystalline silicon were studied. A metal-porous silicon structure was used to obtain the rectifying behavior. The geometry of the metal layer deposited by thermal evaporation on the porous zone was modified with different masks fabricated using a photolithographic method. The samples obtained under different anodization conditions were characterized by PL. The sample that showed the best intensity in photoluminescence, centered on 675 nm, was selected and five samples obtained under these conditions were prepared to compare the difference in the photoresponse because of the geometry of the evaporated metal layer. The responsivities obtained show us an important difference between the devices and allow us to propose a specific geometrical pattern to obtain a better response in this kind of devices.     

The Origin of the High Voltage in DPM12/P3HT Organic Solar Cells

Organic solar cells made using a blend of DPM12 and P3HT are studied. The results show that higher V_oc can be obtained when using DPM12 in comparison to the usual mono‐substituted PCBM electron acceptor. Moreover, better device performances are also registered when the cells are irradiated with sun‐simulated light of 10–50 mW cm^?2 intensity. Electrochemical and time‐resolved spectroscopic measurements are compared for both devices and a 100‐mV shift in the density of states (DOS) is observed for DPM12/P3HT devices with respect to PCBM/P3HT solar cells and slow polaron‐recombination dynamics are found for the DPM12/P3HT devices. These observations can be directly correlated with the observed increase in V_oc, which is in contrast with previous results that correlated the higher V_oc with different ideality factors obtained using dark‐diode measurements. The origin for the shift in the DOS can be correlated to the crystallinity of the blend that is influenced by the properties of the included fullerene.