Topology optimization of continuum structures subjected to uncertainties in material properties

This work addresses the use of the topology optimization approach to the design of robust continuum structures under the hypothesis of uncertainties with known second‐order statistics. To this end, the second‐order perturbation approach is used to model the response of the structure, and the midpoint discretization technique is used to discretize the random field. The objective function is a weighted sum of the expected compliance and its standard deviation. The optimization problem is solved using a traditional optimality criteria method. It is shown that the correlation length plays an important role in the obtained topology and statistical moments when only the minimization of the standard deviation is considered, resulting in more and thinner reinforcements as the correlation length decreases. It is also shown that the minimization of the expected value is close to the minimization of the deterministic compliance for small variations of Young's modulus. Copyright © 2016 John Wiley & Sons, Ltd.     

Spatial and temporal variability of macrophyte cover and productivity in the eastern Amazon floodplain: A remote sensing approach

Herbaceous aquatic macrophytes cover extensive areas on the floodplains of the Amazon basin and are an important habitat and input of organic carbon. These communities have large intra- and inter-annual variability, and characterization of this variability is necessary to quantify the role of macrophytes in the ecology and biogeochemistry of the floodplain. A novel approach for mapping the temporal evolution of aquatic vegetation in the Amazon floodplain, which could be adapted to other spatially and temporally changing environments, is presented. Macrophyte cover varied seasonally and inter-annually, ranging between 104 and 198 km² for the floodplain examined (total area, 984 km²). The observed evolution of plant distribution indicated a spatial and temporal partition of macrophyte communities into short-lived and annual groups. A simulation of macrophyte net primary production (NPP) based on the mapping results indicated that at least 3% of NPP could be attributed to the short-lived communities. The present results suggest that significant changes in the macrophyte's contribution to carbon cycling in the Amazon floodplain could occur as a result of the predicted increase in frequency of drought years for the Amazon system due to climate change.     

Numerical study of the mixture formation process in a four-stroke GDI engine for two-wheel applications

Guidelines for managing the mixture formation process in a high-performance four-stroke Gasoline Direct Injection (GDI) engine for two-wheel applications are discussed, as derived from a multidimensional modelling of the in-cylinder processes. Gasoline adduction from a multi-hole injector is simulated by resorting to a properly developed model that accounts for the dependence of the initial droplets size distribution upon injection pressure. The model portability is preliminary demonstrated by comparison with experimental measurements carried out on sprays entering a confined vessel at controlled conditions.The simulation of different engine operating conditions highlights the capability to work under the so-called “mixed mode” boosting with spray guided mixture formation.     

A web-based formative assessment tool for Masters students: A pilot study

The use of web-based learning and assessment tools is growing in tertiary institutions around the world. To date, very few papers have reported the development and evaluation of a web-based formative assessment tool for postgraduate students. The aim of the present paper was to report on the development and evaluation of an online formative assessment tool for this student group. The web-based formative assessment tool was evaluated by a sample of undergraduate students, postgraduate students and academic staff within a psychology department in order to determine the suitability and sensitivity of the tool. The results of this pilot test suggest that the development of such a tool is both appropriate and feasible for Masters students studying psychology.     

Performance analysis of available bandwidth estimation tools for grid networks

Modern large-scale grid computing systems for processing advanced science and engineering applications rely on geographically distributed clusters. In such highly distributed environments, estimating the available bandwidth between clusters is a key issue for efficient task scheduling. We analyze the performance of two well known available bandwidth estimation tools, pathload and abget, with the aim of using them in grid environments. Differently than previous investigations (Jain et al., ; Shriram et al., in Passive and active network measurement: 6th international workshop, PAM 2005. Springer, Berlin, 2005), our experiments consider a series of relevant metrics such as accuracy of the estimation, convergence time, degree of intrusion in the grid links, and ability to handle multiple simultaneous estimations. No previous work has analyzed the use of available bandwidth tools for the derivation of efficient grid scheduling.     

A systematic mapping study of software product lines testing

Context

In software development, Testing is an important mechanism both to identify defects and assure that completed products work as specified. This is a common practice in single-system development, and continues to hold in Software Product Lines (SPL). Even though extensive research has been done in the SPL Testing field, it is necessary to assess the current state of research and practice, in order to provide practitioners with evidence that enable fostering its further development.

Objective

This paper focuses on Testing in SPL and has the following goals: investigate state-of-the-art testing practices, synthesize available evidence, and identify gaps between required techniques and existing approaches, available in the literature.

Method

A systematic mapping study was conducted with a set of nine research questions, in which 120 studies, dated from 1993 to 2009, were evaluated.

Results

Although several aspects regarding testing have been covered by single-system development approaches, many cannot be directly applied in the SPL context due to specific issues. In addition, particular aspects regarding SPL are not covered by the existing SPL approaches, and when the aspects are covered, the literature just gives brief overviews. This scenario indicates that additional investigation, empirical and practical, should be performed.

Conclusion

The results can help to understand the needs in SPL Testing, by identifying points that still require additional investigation, since important aspects regarding particular points of software product lines have not been addressed yet.     

A strategy for allowing meaningful and comparable scores in approximate matching

Approximate data matching aims at assessing whether two distinct instances of data represent the same real-world object. The comparison between data values is usually done by applying a similarity function which returns a similarity score. If this score surpasses a given threshold, both data instances are considered as representing the same real-world object. These score values depend on the algorithm that implements the function and have no meaning to the user. In addition, score values generated by different functions are not comparable. This will potentially lead to problems when the scores returned by different similarity functions need to be combined for computing the similarity between records. In this article, we propose that thresholds should be defined in terms of the precision that is expected from the matching process rather than in terms of the raw scores returned by the similarity function. Precision is a widely known similarity metric and has a clear interpretation from the user's point of view. Our approach defines mappings from score values to precision values, which we call adjusted scores. In order to obtain such mappings, our approach requires training over a small dataset. Experiments show that training can be reused for different datasets on the same domain. Our results also demonstrate that existing methods for combining scores for computing the similarity between records may be enhanced if adjusted scores are used.     

A computational model for developing semantic web-based educational systems

Recently, some initiatives to start the so-called semantic web-based educational systems (SWBES) have emerged in the field of artificial intelligence in education (AIED). The main idea is to incorporate semantic web resources to the design of AIED systems aiming to update their architectures to provide more adaptability, robustness and richer learning environments. However, the construction of such systems is highly complex and faces several challenges in terms of software engineering and artificial intelligence aspects. This paper presents a computational model for developing SWBES focusing on the problem of how to make the development easier and more useful for both developers and authors. In order to illustrate the features of the proposed model, a case study is presented. Furthermore, a discussion about the results regarding the computational model construction is available.     

Constructive learning neural network applied to identification and control of a fuel-ethanol fermentation process

In the present work, a constructive learning algorithm was employed to design a near-optimal one-hidden layer neural network structure that best approximates the dynamic behavior of a bioprocess. The method determines not only a proper number of hidden neurons but also the particular shape of the activation function for each node. Here, the projection pursuit technique was applied in association with the optimization of the solvability condition, giving rise to a more efficient and accurate computational learning algorithm. As each activation function of a hidden neuron is defined according to the peculiarities of each approximation problem, better rates of convergence are achieved, guiding to parsimonious neural network architectures. The proposed constructive learning algorithm was successfully applied to identify a MIMO bioprocess, providing a multivariable model that was able to describe the complex process dynamics, even in long-range horizon predictions. The resulting identification model was considered as part of a model-based predictive control strategy, producing high-quality performance in closed-loop experiments.     

Fixed-point DSP implementation of nonlinear controller for large gap electromagnetic suspension system

Electromagnetic suspension systems are inherently nonlinear and often face hardware limitation when digitally controlled. The main contributions of this paper are: the design of a nonlinear H_∞ controller, including dynamic weighting functions, applied to a large gap electromagnetic suspension system and the presentation of a procedure to implement this controller on a fixed-point DSP, through a methodology able to translate a floating-point algorithm into a fixed-point algorithm by using l_∞ norm minimization due to conversion error. Experimental results are also presented, in which the performance of the nonlinear controller is evaluated specifically in the initial suspension phase.