Measurement of synchronous machine rotor angle from analysis ofzero sequence harmonic components of machine terminal voltage

Generator rotor angle measurement is useful in identification of electric machine parameters in the d and q axes and as an indicator of stability of the operating condition. Rotor angle measurements with the appropriate bandwidth are also very useful in observation of rotor torsional oscillations both for monitoring and protection against undamped torsional modes, and for use in control schemes designed to damp torsional oscillations. A method of measurement of synchronous machine rotor angle from an analysis of the phase angle of zero sequence harmonic components of terminal voltage is presented     

Ischemia‐reperfusion injury. A phenomenon,that also occurs in the bone

Ischemia‐reperfusion injury of the bone occurs due to traumatic and non‐traumatic alterations affecting blood supply to the bone. It is likely to occur also upon insertion of an implant. Ischemia‐reperfusion injury of the bone has been studied by interruption of blood supply in situ, in limb replantation/transplantation models, in revascularized bone grafts and non‐vascularized bone fragments, as well as in isolated cultured cells. All cells of the bone are affected, including osteoblasts, osteocytes, osteoclasts, chondrocytes, and bone marrow cells. Critical ischemia times for induction of bone cell death, either in the ischemic period or following reperfusion, are in the range of 3 to 7 h. These critical ischemia times are significantly increased by decreasing the temperature from 37 °C to 0–4 °C. Anoxia is the most likely trigger of cell injury in the ischemic phase. In the reperfusion phase, reactive oxygen species are decisively involved in the injurious process. In general, however, the available information on the mechanism of ischemia‐reperfusion injury of the bone is relatively sparse. On the other hand, there are clear similarities to the mechanisms of ischemia‐reperfusion injury known from other organs, and there is a clear potential for protection against ischemia‐reperfusion injury of the bone.     

Flood risk mapping at European scale.

The aim of this article is to illustrate a framework for flood risk mapping at pan-European scale produced by the Weather-Driven Natural Hazards (WDNH) action of the EC-JRC-IES. Early results are presented in the form of flood risk index maps. We assess several flood risk factors that contribute to the occurrence of flood disasters. Among the causal factors of a flood disaster one is triggering a natural event in the form of extreme precipitation and consequently extreme river discharge and extreme flood water levels. The threatening natural event represents the hazard component in our assessment. Furthermore exposure and vulnerability are anthropogenic factors that contribute also to flood risk. In the proposed approach, flood risk is considered on the light of exposure, vulnerability and hazard. We use a methodology with a marked territorial approach for the assessment of the flood risk. Hence, based on mathematical calculations, risk is the product of hazard, exposure and vulnerability. Improvements on datasets availability and spatial scale are foreseen in the next phases of this study. This study is also a contribution to the discussion about the need for communication tools between the natural hazard scientific community and the political and decision making players in this field.     

Adjuvant arthritis: influence of the adjuvant volume and composition on the non-specific inflammation

Adjuvant-induced arthritis is an animal model of chronic inflammatory disease widely used in anti-inflammatory and immunosuppressive drugs testing. When the development and the inhibition of the induced arthritis are measured by the injected paw oedema, it is difficult to delineate the immunological contribution from the persistent non-specific primary section. To study the influence of volume and composition of the injected adjuvant upon the primary non-specific inflammation, we devised a 3X4 factorial experiment on a strain of inbred rats with a low susceptibility to adjuvant-induced arthritis. The injection of mineral oil alone produces a persistent oedema. The injection of mycobacteriae in suspension in saline induces a rapid inflammatory response followed by a fast decrease of the oedema. When complete adjuvant is used, there is always a very strong interaction between the effects of the two components of the adjuvant, i.e. the measured oedemas are much greater than the calculated values, For a given injected volume, the inflammation is maximum when the concentration of mycobacteriae is 2.5 mg/ml. All the rats injected with complete adjuvant present a transient oedema of the non-injected hind paw. This oedema is very small and proportional to the amount of mycobacteria injected.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Analysis of the fluorescence of the ion Eu in fluoroborate glasses containing silver particles

We have studied theoretically and experimentally the fluorescence enhancement in fluoroborate glasses, doped with the ion Eu³⁺, containing small silver particles. The model developed shows that the gain coefficient has quenching and enhancement regions. The absorption peak of the metallic particles occurs at 425 nm, which is not in resonance with the ⁵L₆ level of the ion Eu³⁺. For this reason it is not possible to make a complete comparison between theoretical and experimental results, but the structure of the absorption spectra allows us to check some crucial aspects of the problem, such as energy transfer, enhancement of the local field and the high absorption by the particle system. Results of electronic microscopy have revealed non-uniformity of the particle distribution with average radii of approximately 20 Å and 35 Å and a measured localized mean filling factor of 0.02.     

Occurrence of the mycotoxins ochratoxin A, zearalenone and deoxynivalenol in feed components.

The mycotoxin contamination of feed components used by the Dutch cooperative feed industry was surveyed to estimate the risk for animal production losses. Of 89 randomly and 6 selectively taken samples of raw materials harvested in 1988 and 1989 27% were contaminated with ochratoxin A (OCHRA), 31% with zearalenone (ZEA) and 20% with deoxynivalenol (DON). The mean content (microgram/kg) of all positive randomly taken samples was 18 (OCHRA), 62 (ZEA) and 630 (DON). The highest level (microgram/kg) for all samples was 120 (OCHRA) in barley, 3100 (ZEA) in corn cob mix and 1900 (DON) in maizegluten feed. The results of this survey show that feed components are often contaminated with mycotoxins. However, the contamination level could only sporadically cause production losses in animal husbandry.     

Cimaterol and clenbuterol residue analysis by HPLC-HPTLC in liver.

A method has been developed for the analysis of cimaterol and clenbuterol residues in liver, with detection limits of 0.25 micrograms/kg and 0.5 micrograms/kg, respectively. The recovery varied from 55% to 60%. After extraction, a clean-up procedure with Baker-spe C-18 columns was performed. The two chemical compounds of interest were eluted with methanol. Cimaterol and clenbuterol were quantitatively determined by high-performance liquid chromatography (HPLC) using an RP-Select B (5 microns) column and a post-column reaction procedure. The positive results were confirmed by high-performance thin-layer chromatography (HPTLC) as this technique reaches the same level of sensitivity as the HPLC method.     

Complete transformer model for electromagnetic transients

A complete, three phase transformer model for the calculation of electromagnetic transients is presented. The model consists of a set of state equations solved with the trapezoidal rule of integration in order to obtain an equivalent Norton circuit at the transformer terminals. Thus the transformer model can be easily interfaced with an electromagnetic transients program. Its main features are: (a) the basic elements for the winding model are the turns; (b) the complete model includes the losses due to eddy currents in the windings and in the iron core; and (c) the solution of the state equations is obtained in decoupled iterations. For validation, the frequency response of the model is compared with tests on several transformers. Applications to the calculation of transients are given for illustration