Interest of molecular functionalization for electrochemical storage

Despite great interests in electrochemical energy storage systems for numerous applications, considerable challenges remain to be overcome. Among the various approaches to improving the stability, safety, performance, and cost of these systems, molecular functionalization has recently been proved an attractive method that allows the tuning of material surface reactivity while retaining the properties of the bulk material. For this purpose, the reduction of aryldiazonium salt, which is a versatile method, is considered suitable; it forms robust covalent bonds with the material surface, however, with the formation of multilayer structures and sp³ defects (for carbon substrate) that can be detrimental to the electronic conductivity. Alternatively, non-covalent molecular functionalization based on π–π interactions using aromatic ring units has been proposed. In this review, the various advances in molecular functionalization concerning the current limitations in lithium-ion batteries and electrochemical capacitors are discussed. According to the targeted applications and required properties, both covalent and non-covalent functionalization methods have proved to be very efficient and versatile. Fundamental aspects to achieve a better understanding of the functionalization reactions as well as molecular layer properties and their effects on the electrochemical performance are also discussed. Finally, perspectives are proposed for future implementation of molecular functionalization in the field of electrochemical storage.

Open image in new window

     

Effect of porosity and hydrostatic pressure on water absorption in a semicrystalline fluoropolymer

This paper discusses the effect of porosity and hydrostatic pressure on diffusion kinetics and equilibrium water uptake in a semicrystalline fluoropolymer. Water sorption experiments at atmospheric pressure and under water pressures up to 250 MPa were carried out during 18 months at 40 °C on reference and porous samples. Porosity of samples was induced due to a cavitation process occurring at the highest triaxiality area of waisted and notched specimens during tensile tests. Water uptake was found to be very sensitive to porosity, showing an increase in samples with a high void fraction. On the other hand, water content decreased with increasing pressure suggesting a compaction of the porous space in which water can be stored. Two models describing this water uptake behaviour were considered. The first is a classical model which assumes that sorption occurs only by diffusion following Fick’s law. Fick’s model was found to be in agreement with the experimental results. A “Langmuir-type” sorption model was also proposed to describe water uptake in porous samples, considering a two-phase water transport mechanism: one portion of the absorbed water diffuses through the polymer matrix and the other portion is stored in voids. This model was implemented in a user subroutine using ABAQUS? software and simulations were confronted to experimental sorption curves showing satisfactory agreements. The potential of the Langmuir-type sorption model resides on its availability to be coupled to a poro-mechanical model, in order to improve the understanding of coupling between the mechanical behaviour and water sorption mechanism in a porous polymer.     

Magnetoresistance behaviour in CoFe/Cu multilayers: thin Cu layer effect

The magnetoresistance properties of the CoFe/Cu multilayers have been investigated as a function of thin non-magnetic Cu layer thickness (from 2.5 to 0.3 nm). CoFe/Cu multilayers were electrodeposited on Ti substrates from a single electrolyte containing their metal ions under potentiostatic control. The structural analysis of the films was made using X-ray diffraction. The peaks appeared at 2θ ≈ 44°, 51°, 74° and 90° are the main Bragg peaks of the multilayers, arising from the (111), (200), (220) and (311) planes of the face-centered cubic structure, respectively. The magnetic characterization was performed by using vibration sample magnetometer in magnetic fields up to ±1600 kA/m. At 0.6, 1.2 and 2.0 nm Cu layer thicknesses, the high saturation magnetization values were observed due to antiferromagnetic coupling of adjacent magnetic layers. Magnetoresistance measurements were carried out using the Van der Pauw method in magnetic fields up to ±1000 kA/m at room temperature. All multilayers exhibited giant magnetoresistance (GMR), and the similar trend in GMR values and GMR field sensitivity was observed depending on the Cu layer thickness.     

Solid biofuels in Mexico: a sustainable alternative to satisfy the increasing demand for heat and power

Bioenergy is the largest renewable energy source in Mexico with an estimated 4–9% of total current energy demand. There are large uncertainties and contrasting estimates regarding its current extent and end-uses, particularly with traditional uses. However, a large potential exists to improve the efficiency of existing uses and, at the same time, to diversify the use of SBF in the industrial and power sectors. This paper aims at: providing the first updated and comprehensive estimate of current SBF demand in Mexico including traditional and modern uses; providing a consistent estimate of actual SBF supply potential; estimating the total potential substitution of fossil fuels that could be achieved by SBF considering an integrated “modernization scenario”; and finally describing the main barriers limiting SBF to fully triggering its potential. Results show that current SBF consumption reached 481 PJ/yr in 2015; SBF supply potential reaches 3622 PJ/yr, out of which 883 PJ/yr could be used to substitute up to 29% of current demand of FF, mitigating 66 MtCO_2e/yr of greenhouse gas (GHG) emissions, or near 88 MtCO_2e/yr if mitigation from traditional uses is added.     

Measurement and analysis of low-acceleration and long-duration longitudinal events using delivery van

This study investigates longitudinal acceleration events during freight transportation characterized as low-acceleration and long-duration using delivery van type vehicles. In the past several decades, there has been an increase in shipments requiring only single or small pallet load quantities and mixed palletized unit loads comprised of different goods. These loads are often transported in delivery vans without load securing devices, increasing the risk of product loss and damage due to load failures resulting from unit loads shifting. A field data acquisition system was used to observe and record the random acceleration events from five vehicles for 5 days, explicitly targeting the vehicles' braking and acceleration manoeuvres. The study aimed to understand the physical phenomenon and provide new information that can be used during preshipment tests to prevent damage to goods and ensure unit load integrity is maintained throughout the supply chain. The events were statistically analysed to understand their probability of occurrence, severity level, and quantify critical parameters such as event rise and hold times. For the braking manoeuvre, the statistical mean of average deceleration was 0.25 g with a corresponding rise and hold duration of 0.83 and 1.27 s, respectively. During the vehicle's acceleration manoeuvre, the statistical mean of average acceleration was 0.29 g with a rise and hold time of 1.29 and 1.39 s, respectively. Utilizing the field data, composite profiles were developed, and these profiles were compared to the currently available test procedures and previous results of other studies.     

Mutation analysis of the MEN1 gene in multiple endocrine neoplasia type 1, familial acromegaly and familial isolated hyperparathyroidism

Multiple endocrine neoplasia type 1 (MEN 1) is an autosomal dominant disease characterized by neoplasia of the parathyroid glands, the endocrine pancreas, and the anterior pituitary gland. In addition, families with isolated endocrine neoplasia, notably familial isolated hyperparathyroidism (FIHP) and familial acromegaly, have also been reported. However, whether these families constitute MEN 1 variants or separate entities remains speculative as the genetic bases for these diseases are unclear. The gene for MEN 1 has recently been cloned and characterized. Using single strand conformation analysis (SSCA) and sequencing, we performed mutation analysis in: a) a total of 55 MEN 1 families from 7 countries, b) 13 isolated MEN 1 cases without family history of the disease, c) 8 acromegaly families, and d) 4 FIHP families. Mutations were identified in 27 MEN 1 families and 9 isolated cases. The 22 different mutations spread across most of the 9 translated exons and included frameshift (11), nonsense (6), splice (2), missense mutations (2), and in-frame deletions (1). Among the 19 Finnish MEN 1 probands, a 1466del12 mutation was identified in 6 families with identical 11q13 haplotypes and in 2 isolated cases indicating a common founder. One frameshift mutation caused by 359del4 (GTCT) was found in 1 isolated case and 4 kindreds of different origin and haplotypes; this mutation therefore represents a common "warm" spot in the MEN1 gene. By analyzing the DNA of the parents of an isolated case one mutation was confirmed to be de novo. No mutation was found in any of the acromegaly and small FIHP families, suggesting that genetic defects other than the MEN1 gene might be involved and that additional such families need to be analyzed.     

The many meanings of UML 2 Sequence Diagrams: a survey

Scenario languages are widely used in software development. Typical usage scenarios, forbidden behaviors, test cases, and many more aspects can be depicted with graphical scenarios. Scenario languages were introduced into the Unified Modeling Language (UML) under the name of Sequence Diagrams. The 2.0 version of UML changed Sequence Diagrams significantly and the expressiveness of the language was highly increased. However, the complexity of the language (and the diversity of the goals Sequence Diagrams are used for) yields several possible choices in its semantics. This paper collects and categorizes the semantic choices in the language, surveys the formal semantics proposed for Sequence Diagrams, and presents how these approaches handle the various semantic choices.     

An information architecture for a performance management framework by collaborating SMEs

Recently, much attention has been given to performance management within collaborative environments resulting in a wide variety of performance measurement/management frameworks. However, practically all of these frameworks present a common gap regarding the information treatment needs that support these frameworks. This issue is even more important in the case of Small and Medium-sized Enterprises (SMEs) due to their special characteristics. For that purpose, this paper presents an approach called Global Performance Management (GPM) Framework composed of a methodology, an information architecture and a technological solution, focusing mainly on the information architecture. The methodology guides SMEs when defining, developing, deploying and operating the GPM framework. The information architecture consists of a set of elements that support the tasks of collection, treatment and analysis of the used information, which complement the methodology to build a real model for the GPM framework. Finally, the technological solution bridges the engineering and conceptual environment, with the real-world operational and executable environment, following the path defined by the methodology. The information architecture was applied to two European pilots, achieving satisfactory results, which are highlighted in the paper as well as the main barriers encountered and solutions provided.     

Modular architecture of the microfactories for automatic micro-assembly

The construction of a new generation of MEMS which includes micro-assembly steps in the current microfabrication process is a big challenge. It is necessary to develop new production means named micromanufacturing systems in order to perform these new assembly steps. The classical approach called “top-down” which consists in a functional analysis and a definition of the tasks sequences is insufficient for micromanufacturing systems. Indeed, the technical and physical constraints of the microworld (e.g. the adhesion phenomenon) must be taken into account in order to design reliable micromanufacturing systems. A new method of designing micromanufacturing systems is presented in this paper. Our approach combines the general “top-down” approach with a “bottom-up” approach which takes into account technical constraints. The method enables to build a modular architecture for micromanufacturing systems. In order to obtain this modular architecture, we have devised an original identification technique of modules and an association technique of modules. This work has been used to design the controller of an experimental robotic micro-assembly station.