Low-energy ion beam treatment of α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>(0001) and improvement of photoluminescence of ZnO thin films

A low energy N₂ ^? ion beam impinged on a α-Al₂O₃(0001) single crystal surface in the range of fluence 5×10¹⁵/cm²?1×10¹⁸/cm² at room temperature. After ion bombardment, chemical bonding on the modified sapphire surface was investigated by x-ray photoelectron spectroscopy. Below a fluence of 1×10¹⁵/cm², only a non-bonded N1s peak at the binding energy 398.7 eV was found, but further irradiation up to 2×10¹⁷/cm² induced Al?O?N bonding at around 403 eV. The occurrence of Al?N bonding was identified at ion fluence higher than 5×10¹⁷/cm² at 396.6 eV. II–VI ZnO thin films were grown on an untreated/ion-beam-induced sapphire surface by pulsed laser deposition (PLD) for the investigation of the modified-substrate effect on photoluminescence. The ZnO films grown on modified sapphire containing Al?O?N bonding only, and both Al?O?N and Al?N bonding showed a significant reduction of the peak related to deep-level defects in photoluminescence. These results are explained in terms of the formation of Al?N?O and Al?O?N layers and relaxation of the interfacial strain between Al₂O₃ and ZnO.     

The Cost of Environmental Constraints in Traffic Networks: Assessing the Loss of Optimality

Increasing numbers of hard environmental constraints are being imposed in urban traffic networks by authorities in an attempt to mitigate pollution caused by traffic. However, it is not trivial for authorities to assess the cost of imposing such hard environmental constraints. This leads to difficulties when setting the constraining values as well as implementing effective control measures. For that reason, quantifying the cost of imposing hard environmental constraints for a certain network becomes crucial. This paper first indicates that for a given network, such cost is not only related to the attribution of environmental constraints but also related to the considered control measures. Next, we present an assessment criterion that quantifies the loss of optimality under the control measures considered by introducing the environmental constraints. The criterion can be acquired by solving a bi-level programming problem with/without environmental constraints. A simple case study shows its practicability as well as the differences between this framework and other frameworks integrating the environmental aspects. This proposed framework is widely applicable when assessing the interaction of traffic and its environmental aspects.     

A study on effects of security risks on acceptance of enterprise cloud service: moderating of employment and non-employment using PLS multiple group analysis

This paper analyzed the effects of security risk factors fit for cloud computing paradigm on the acceptance of enterprise cloud service with intent to illuminate the factors for vitalizing the adoption of corporate cloud services in the future. The acceptance intention was set as a dependent variable. Independent variables were set in reference to the technology acceptance theory. Security risks were categorized into compliance risk, information leakage risk, troubleshooting risk and service discontinuation risk to design a model for analysis.     

The optimal level of CRM IT investments

In light of the growing relevance of customer-oriented business strategies IT investments in the field of Customer Relationship Management have increased considerably. However, firms often could not realize sufficient returns on these IT investments. One major reason for this failure seems to be the lack of appropriate approaches to determine the economic impact of such investments ex ante. Therefore, we develop an economic model to determine the optimal level of Customer Relationship Management IT investments. Using this approach, firms can evaluate, to what extent investments in Customer Relationship Management IT are reasonable. One major result is that in most cases the “all or nothing strategy” pursued by many firms does not lead to the optimal level of investments. To illustrate the practical utility and applicability of the approach, we provide a real world example of a German financial services provider.     

Social commerce research: An integrated view

Social commerce has quickly emerged as a new area of inquiry for both practitioners and researchers, suggesting the potential impacts of social media and social networking technologies and services in shaping commercial channels on and off the Internet. This essay starts by providing a brief overview of social commerce research and practice in light of the wide attention it has drawn in the industry. Then, we propose a research framework with an integrated view of social commerce that consists of four key components: business, technology, people, and information. The framework helps us understand the development of social commerce research and practice to date. Subsequently, we report some preliminary findings from a bibliometric study of academic and industry publications in social commerce to reveal recent trends and research topics, as well as some verification of the research framework. Finally, we discuss five articles in this special issue and categorize them in terms of the proposed social commerce research framework.     

Flow profile measurement in microchannel using the optical feedback interferometry sensing technique

The need to accurately measure flow profiles in microfluidic channels is well recognised. In this work, we present a new optical feedback interferometry (OFI) flow sensor that accurately measures local velocity in fluids and enables reconstruction of a velocity profile inside a microchannel. OFI is a self-aligned interferometric technique that uses the laser as both the transmitter and the receiver thus offering high sensitivity, fast response, and a simple and compact optical design. The system described here is based on a commercial semiconductor laser and has been designed to achieve a micrometer-range spatial resolution. The sensor performance was validated by reconstructing the velocity profile inside a circular cross-section flow-channel with 320  $\upmu $ m internal diameter, with a relative error smaller than 1.8 %. The local flow velocity is directly measured, thus avoiding the need for model based profile calculation and uncertainties inherent to this approach. The system was validated by successfully extracting the flow profiles in both Newtonian and shear-thinning liquids.     

Universal Remote Console-based next-generation accessible television

This paper presents a new approach to make current and future television universally accessible. The proposed approach provides a means of universal accessibility both for remotely operating the TV set and for interacting with online services delivered through the TV. This proposal is based on the ISO/IEC 24752 “Universal Remote Console” (URC) standard. This standard defines an abstract user interface layer called the “user interface socket” and allows the development of pluggable (plug-in) user interfaces for any type of user and any control device. The proposed approach lays the foundation for the development of advanced user interfaces that can be interacted within various modalities. Different prototypes have been developed based on this approach and tested with end users. The user tests have shown this approach to be a viable option for the proposed scenarios. Based on the experience gathered with the prototypes, recommendations and implementation options are suggested for commercial adoption.     

The Formation of Calcified Nanospherites during Micropetrosis Represents a Unique Mineralization Mechanism in Aged Human Bone

Osteocytes—the central regulators of bone remodeling—are enclosed in a network of microcavities (lacunae) and nanocanals (canaliculi) pervading the mineralized bone. In a hitherto obscure process related to aging and disease, local plugs in the lacuno‐canalicular network disrupt cellular communication and impede bone homeostasis. By utilizing a suite of high‐resolution imaging and physics‐based techniques, it is shown here that the local plugs develop by accumulation and fusion of calcified nanospherites in lacunae and canaliculi (micropetrosis). Two distinctive nanospherites phenotypes are found to originate from different osteocytic elements. A substantial deviation in the spherites' composition in comparison to mineralized bone further suggests a mineralization process unlike regular bone mineralization. Clearly, mineralization of osteocyte lacunae qualifies as a strong marker for degrading bone material quality in skeletal aging. The understanding of micropetrosis may guide future therapeutics toward preserving osteocyte viability to maintain mechanical competence and fracture resistance of bone in elderly individuals.     

Enhanced hydrothermal stability of ZSM-5 formed from nanocrystalline seeds for naphtha catalytic cracking

We successfully synthesized hydrothermally stable ZSM-5 with crystalline nano seeds. We employed a template-free method using ZSM-5 crystalline nano seeds and sodium silicate as a silica source. The prepared ZSM-5 exhibited uniform crystal size and relative crystallinity greater than 100 %. The size of the crystalline nano seed in the scale of 100 nm was found to be the optimum size for obtaining uniform, highly crystalline ZSM-5 with structural stability. After P-modification, the synthesized ZSM-5 with the optimally sized seed showed high hydrothermal stability and improved catalytic naphtha cracking activity compared to a commercial ZSM-5 catalyst. In order to find the elements for the increased hydrothermal stability, the samples were evaluated by studying crystallinity, aluminum spectrum, and acidity using XRD, solid-state NMR, and NH₃-TPD, respectively after steaming at 800 °C for 24 h. It is speculated that the increased hydrothermal stability of the ZSM-5 resulted mainly from the increased aluminum structural stability.