Calcium: A comprehensive review on quantification,interaction with milk proteins and implications for processing of dairy products

Calcium (Ca) is a key micronutrient of high relevance for human nutrition that also influences the texture and taste of dairy products and their processability. In bovine milk, Ca is presented in several speciation forms, such as complexed with other milk components or free as ionic calcium while being distributed between colloidal and serum phases of milk. Partitioning of Ca between these phases is highly dynamic and influenced by factors, such as temperature, ionic strength, pH, and milk composition. Processing steps used during the manufacture of dairy products, such as preconditioning, concentration, acidification, salting, cooling, and heating, all contribute to modify Ca speciation and partition, thereby influencing product functionality, product yield, and fouling of equipment. This review aims to provide a comprehensive understanding of the influence of Ca partition on dairy products properties to support the development of kinetics models to reduce product losses and develop added-value products with improved functionality. To achieve this objective, approaches to separate milk phases, analytical approaches to determine Ca partition and speciation, the role of Ca on protein–protein interactions, and their influence on processing of dairy products are discussed.     

Polymerization of epoxides catalyzed by a mixed‐valent iron trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]

The readily available mixed‐valent iron trifluoroacetate complex [Fe₂^IIIFe^II(µ₃‐O)(O₂CCF₃)₆(H₂O)₃] is an effective catalyst for the polymerization of epoxides. A very small amount of the catalyst (1.0–0.01 mol%) could initiate the polymerization of cyclohexene oxide, cyclopentene oxide and epichlorohydrin. Based on quantitative end‐group analysis by ¹⁹F NMR spectroscopy, a Lewis acid (LA^⊕) catalyzed anionic reaction mechanism is proposed. Copyright © 2012 Society of Chemical Industry     

Model-based analysis of photoinitiated coating degradation under artificial exposure conditions

Coating degradation mechanisms of thermoset coatings exposed to ultraviolet radiation and humidity at constant temperature are investigated. The essential processes, photoinitiated oxidation reactions, intrafilm oxygen permeability, water absorption and diffusion, reduction of crosslink density, and development of a thin surface oxidation zone are quantified and a mathematical model for degrading coatings developed. Front-tracking techniques are used to determine the rate of movement of the oxidation and ablation fronts, the positions of which define the extension of the surface oxidation zone. Three previous and independent experimental investigations with two-component, densely crosslinked, epoxy?Camine model coatings were selected for verification of the mathematical model. Simulations can match and explain transient mass loss and coating thickness reduction data and are in agreement with infrared measurements of carbonyl groups formed in the surface zone. The thickness of the stable surface oxidation zone, which is established after an initial ablation lag time, is estimated by the model to 0.5?C2???m in good agreement with previous measurements. Simulated concentration profiles of active groups, oxygen, and radicals in the stable surface oxidation zone are presented and analyzed. The mathematical model can be used for obtaining a quantitative insight into the degradation of thermoset coatings and has potential, after further development, to complete commercial coatings and dynamic exposure conditions, to become a supplementing tool for predicting in-service coating behavior based on accelerated laboratory measurements.     

Effect of NiO-to-Ni Transformation on Conductivity and Structure of Yttria-Stabilized ZrO2

The conductivity and structure of 8-mol%-yttria-stabilized zirconia with additions of nickel oxide has been investigated, both in the as-prepared state and after reduction of NiO in hydrogen. During reduction at 1000°C, the conductivity decreases by 40%–50% and most of the NiO dissolved in the zirconia is exsolved in the form of nickel particles. This is accompanied by the formation of tetragonal zirconia precipitates of size 10–40 nm and by an increase in the lattice parameter. On reoxidation in air at 1000°C, the change in lattice parameter is partly reversed, but the conductivity shows no further changes.     

Engineering model for intumescent coating behavior in a pilot‐scale gas‐fired furnace

In the event of a fire, intumescent fire protective coatings expand and form a thermally insulating char that protects the underlying substrate from heat and subsequent structural failure. The intumescence includes several rate phenomena, which have been investigated and quantified in the literature for several decades. However, various challenges still exist. The most important one concerns mathematical model validation under realistic exposure conditions and/or time scales. Another is the simplification of advanced models to overcome the often‐seen lack of a complete set of input and adjustable model parameters for a given coating, thereby providing models for industrial applications. In this work, these two challenges are addressed. Three experimental series, with an intumescent coating inside a 0.65 m³ gas‐fired furnace, heating up according to so‐called cellulosic fire conditions, were conducted and a very good repeatability was evident. The experiments were run for almost 3 h, reaching a final gas temperature of about 1100°C. Measurements include transient temperature developments inside the expanding char, at the steel substrate, and in the mineral wool insulation placed behind the substrate. A mathematical model, describing the intumescent coating behavior and temperatures in the furnace using a single overall reaction was developed and validated against experimental data. By including a decomposition front movement through the char, a good qualitative agreement was obtained. After further validation against experiments with other coating formulations, it has potential to become a practical engineering tool. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3947–3962, 2016     

Long-term stability of PEG-based antifouling surfaces in seawater

Poly(ethylene glycol) (PEG) is a hydrophilic polymer that has been extensively used in the biomedical and marine environment due to its antifouling properties. In the biomedical field, PEG has been successfully used to functionalize surfaces due to its resistance to cell and nonspecific protein adsorption. However, the long-term stability of PEG has limited its use in some areas. In the shipping industry, there is a great need for long-term solutions to keep the hulls of the ships fouling-free. The long-term stability of PEG in polydimethylsiloxane (PDMS) fouling-release coatings is studied here, in both accelerated laboratory tests and real seawater conditions. This article shows how PEG-based copolymers, which have been exposed in fouling-release coatings to real-life seawater conditions, are isolated and compared to those exposed to accelerated laboratory testing with successful results. The influence of the chemistry of the PEG compounds, the chosen laboratory degrading agents, and the possible degradation pathways and products are discussed.     

Importance of a Conserved Lys/Arg Residue for Ligand/PDZ Domain Interactions as Examined by Protein Semisynthesis

PDZ domains are ubiquitous small protein domains that are mediators of numerous protein–protein interactions, and play a pivotal role in protein trafficking, synaptic transmission, and the assembly of signaling‐transduction complexes. In recent years, PDZ domains have emerged as novel and exciting drug targets for diseases (in the brain in particular), so understanding the molecular details of PDZ domain interactions is of fundamental importance. PDZ domains bind to a protein partner at either a C‐terminal peptide or internal peptide motifs. Here, we examined the importance of a conserved Lys/Arg residue in the ligand‐binding site of the second PDZ domain of PSD‐95, by employing a semisynthetic approach. We generated six semisynthetic PDZ domains comprising different proteogenic and nonproteogenic amino acids representing subtle changes of the conserved Lys/Arg residue. These were tested with four peptide interaction partners, representing the two different binding modes. The results highlight the role of a positively charged amino acid in the β1–β2 loop of PDZ domains, and show subtle differences for canonical and noncanonical interaction partners, thus providing additional insight into the mechanism of PDZ/ligand interaction.