Method for Measuring Short-Crack R-Curves without Calibration Parameters: Case Studies on Alumina and Alumina/Aluminum Composites

A method to measure short-crack R -curves is introduced which does not require an independent determination of calibration factors and which utilizes an equilibrium crack shape condition to compute the shape factor of a surface crack, R -curves of an alumina with two different grain sizes and of an aluminum/alumina composite were measured in the crack length regime of below 100 μm up to almost 1000 μm. Calculated and experimentally obtained crack depth profiles were in good agreement with deviations being between −22% and +26% for the crack ellipticity and confirmed the reliability of the method.     

Direct Laser Sintering of Al2O3–SiO2 Dental Ceramic Components by Layer-Wise Slurry Deposition

This publication presents a solid freeform fabrication technique for ceramics in the alumina–silica system by layering binder-free, high-loaded ceramic slurries, followed by selective laser sintering. The low melting silica phase and the reaction sintering between silica and alumina favor the rapid prototyping of pure ceramic parts. On the basis of electroacoustic and viscosity measurements, stable slurries from Al₂O₃/SiO₂ powder mixtures and water with a high fluidity have been prepared for the layer deposition with a doctor blade like in tape casting. Layers with a thickness of about 100 μm were processed. It was found in laser parameter studies that ceramic parts can only be obtained using special alumina contents and laser parameters. But the biphasic approach may allow greater flexibility in the processing regime than is afforded by the use of just one material. The microstructure of these parts depends mainly on the temperature gradient induced by the laser absorption and thermal conduction. The wet shaping facilitates laser-sintered parts with a relatively high density, which could be increased by a thermal post-treatment.     

Vollständige Beschreibung der Spannungs-Dehnungs-Kurven mit Hooke-Gerade,Fließhorizontale und Verfestigungsklothoide

Es werden die experimentellen und numerischen Ergebnisse dargelegt, um die gesamte Spannungs-Dehnungs-Kurve des Zugversuches mit sechs Kennwerten zu beschreiben. Dies sind: Elastizitätsmodul, Streckgrenze, Fließdehnung, Zugfestigkeit, Gleichmaßdehnung und Verfestigungsmodul. Dadurch werden auch im überelastischen Bereich numerische Beziehungen möglich zwischen: Verformungen und Spannungen, Dehngrenzen, Tangenten-Modulen und Arbeitsvermögen. Die Beziehungen erweitern die Ermittlung von Last- und Eigenspannungen, und die Berechnungen beim plastischen Umformen, beim Traglastverfahren und beim Messen von Kerbspannungen.     

Effects of superconducting fluctuations on the NMR relaxation rateT 1 −1 of two-dimensional systems aboveT c

Fluctuation-induced corrections to the NMR relaxation rate T ₁ ^–1 in dirty two-dimensional superconductors above the superconducting transition (T>T_c) are re-investigated including dynamic fluctuations. Static fluctuations, as discussed by Kuboki and Fukuyama,¹ dominate the fluctuation terms near T_c. We find that dynamic fluctuations become important for T/T_c1.05, and might even reverse the sign of the total fluctuation-induced contributions to T ₁ ^–1 . We observe that (T₁T)^–1 has a minimum at T=T_min (·) for ·/T_c0.1 which depends on the pair-breaking parameter ·. Furthermore, we show that the fluctuation contributions to T ₁ ^–1 can be obtained numerically with very high accuracy from multipoint Padé approximants.     

Chemical composition and bond structure of carbon-nitride films deposited by CH4/N2 dielectric barrier discharge

Carbon nitride films have been deposited by dielectric barrier discharge with a CH₄/N₂ gas mixture at different conditions. Fourier Transform Infrared (FTIR) spectroscopy, X-ray photo electron spectroscopy (XPS), Raman spectroscopy, Atomic force microscopy (AFM) and ellipsometry were used to systematically study chemical composition, bond structure and surface morphology of deposited films. Various bonds between carbon, nitrogen, hydrogen, and also oxygen were observed.     

Liver Lipids of Patients with Hepatitis B and C and Associated Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) still remains a difficult to cure malignancy. In recent years, the focus has shifted to lipid metabolism for the treatment of HCC. Very little is known about hepatitis B virus (HBV) and C virus (HCV)-related hepatic lipid disturbances in non-malignant and cancer tissues. The present study showed that triacylglycerol and cholesterol concentrations were similar in tumor adjacent HBV and HCV liver, and were not induced in the HCC tissues. Higher levels of free cholesterol, polyunsaturated phospholipids and diacylglycerol species were noted in non-tumorous HBV compared to HCV liver. Moreover, polyunsaturated phospholipids and diacylglycerols, and ceramides declined in tumors of HBV infected patients. All of these lipids remained unchanged in HCV-related HCC. In HCV tumors, polyunsaturated phosphatidylinositol levels were even induced. There were no associations of these lipid classes in non-tumor tissues with hepatic inflammation and fibrosis scores. Moreover, these lipids did not correlate with tumor grade or T-stage in HCC tissues. Lipid reprogramming of the three analysed HBV/HCV related tumors mostly resembled HBV-HCC. Indeed, lipid composition of non-tumorous HCV tissue, HCV tumors, HBV tumors and HBV/HCV tumors was highly similar. The tumor suppressor protein p53 regulates lipid metabolism. The p53 and p53S392 protein levels were induced in the tumors of HBV, HCV and double infected patients, and this was significant in HBV infection. Negative correlation of tumor p53 protein with free cholesterol indicates a role of p53 in cholesterol metabolism. In summary, the current study suggests that therapeutic strategies to target lipid metabolism in chronic viral hepatitis and associated cancers have to consider disease etiology.     

Catalytic oxidation of hydrogen sulphide on activated carbons

Activated carbon is a suitable adsorbent for removal of hydrogen sulphide from natural, synthesis or other product gases. The process depends predominantly on physical adsorption, though catalytic oxidation is also involved. During catalytic oxidation the H₂S is converted in the presence of oxygen to elemental sulphur, which is adsorbed onto the internal surface of the activated carbon, thus leading to a sulphur load of up to 120% by weight. The oxidation rate depends on the partial pressure of both reactants, H₂S and O₂ and is largely controlled by the characteristics of the activated carbon. The activity of the catalyst can be improved by impregnating the activated carbon with promoters such as iron and iodine. The regeneration of spent carbon is currently carried out using hot gas desorption methods at temperatures around 450 °C.     

Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing

Prior research suggests that ergonomics work design and mixed teams (in age and gender) may compensate declines in certain abilities of ageing employees. This study investigates simultaneous effects of both team level factors on absenteeism and performance (error rates) over one year in a sample of 56 car assembly teams (N = 623). Results show that age was related to prolonged absenteeism and more mistakes in work planning, but not to overall performance. In comparison, high-physical workload was strongly associated with longer absenteeism and increased error rates. Furthermore, controlling for physical workload, age diversity was related to shorter absenteeism, and the presence of females in the team was associated with shorter absenteeism and better performance. In summary, this study suggests that both ergonomics work design and mixed team composition may compensate age-related productivity risks in manufacturing by maintaining the work ability of older employees and improving job quality.