Reduction of neuropeptide Y binding sites in the rat hippocampus after electroconvulsive stimulations

The role of vasoactive intestinal peptide (VIP) was investigated when mucosal stroking and 5-hydroxytryptamine (5-HT) were used to activate neural reflexes that stimulate chloride secretion in the guinea pig colon. Muscle-stripped segments of colon containing intact submucosal ganglia without myenteric ganglia were set up in modified flux chambers in order to record short-circuit current (Isc). Mucosal stroking with a brush for 1 s or a pulse of 5-HT (injection of 15 microliters of 100 microM 5-HT into 1.5 ml of mucosal solution) caused an increase in Isc that was reduced by the VIP antagonist, neurotensin6-11-VIP7-28, in a concentration-dependent manner. The Isc responses to mucosal stroking and a 5-HT pulse were reduced by 53% and 58%, respectively, by 2 microM neurotensin6-11-VIP7-28. The residual Isc response in the presence of neurotensin6-11-VIP7-28 was abolished by atropine. Blockade of 5-HT1P receptors on submucosal afferent neurons decreased Isc responses to stroking or a 5-HT pulse. The residual Isc response after 5-HT1P receptors were blocked was reduced by only 11-14% by neurotensin6-11-VIP7-28. In the presence of blockade of both 5-HT1P and VIP receptors, atropine abolished the Isc response to both stimuli. The observations suggest that the neural circuitry activated by stroking includes at least two independent pathways. One pathway contains VIP neurons which receive inputs directly or indirectly from 5-HT1P receptor-containing afferents. A second pathway involves muscarinic cholinergic transmission that is independent of 5-HT1P and VIP receptor activation.     

An optical flow-based method to predict infantile cerebral palsy

Cerebral palsy (CP) is a perinatally acquired nonprogressive brain damage resulting in motor impairment affecting mobility and posture. Early identification of infants with CP is desired to target early interventions and follow-up. During early infancy, distinct motion patterns occur which are highly predictive for later disability. These motor patterns can be observed and recorded. In this paper, a method to predict later CP based on early video recordings of the infants' spontaneous movements, applying optical flow and statistical pattern recognition, is presented. We extract motion information from video recordings of young infants using a total variation related optical flow method. By using wavelet analysis features from motion trajectories of points initiated on a regular grid were extracted and classified using a support vector machine.     

Oxidative damage to proteolytic enzymes: inactivation of papain and ficin by ferrylmyoglobin

 Ferrylmyoglobin [MbFe(IV)=O], formed by activation of metmyoglobin by hydrogen peroxide, inactivates the cysteine proteinases papain (EC 3.4.22.2) and ficin (EC 3.4.22.3) more efficiently than hydrogen peroxide, but less efficiently than hydroxyl radicals as generated by peroxynitrite or the Fenton reaction. Metmyoglobin and oxymyoglobin could not inactivate papain and ficin. Oxidation of papain and ficin by ferrylmyoglobin occurs in enzyme/haem-protein complexes with binding constants of approximately 10⁵ l · mol^–1; inactivation of proteolysis by papain plateaus at neutral pH to about ¹/₃ whereas the inactivation under acidic conditions was larger. Received: 11 July 1997 / Revised version: 16 September 1997     

Restricted randomization and multiple responses in industrial experiments

Two issues regarding designed experiments are discussed; restrictions on randomization and multiple responses. The former is typically related to hard‐to‐vary factors and factors appearing in separate stages of a process experiment. Randomization restrictions should be taken into account in the construction of the design as well as in the statistical modelling. In the paper, a case study of sausage production is discussed, having a split‐plot model with correlated multiple responses. Multiple responses are handled in two ways, by principal component analysis (PCA) followed by ANOVA of the principal components, and by a newly developed alternative, the ‘50–50 MANOVA’. Multiple tests of correlated response variables are also described. Practical aspects of the planning, performing, response measurements, and statistical analysis are emphasized throughout. Hence, the paper aims to extend the utility of statistical methods in industry by linking design of experiments to multivariate analysis of the responses. Copyright © 2007 John Wiley & Sons, Ltd.     

Risk-based rules for crane safety systems

The International Maritime Organisation (IMO) has recommended a method called formal safety assessment (FSA) for future development of rules and regulations. The FSA method has been applied in a pilot research project for development of risk-based rules and functional requirements for systems and components for offshore crane systems. This paper reports some developments in the project. A method for estimating target reliability for the risk-control options (safety functions) by means of the cost/benefit decision criterion has been developed in the project and is presented in this paper. Finally, a structure for risk-based rules is proposed and presented.     

A sorption rate hypothesis for the increase in H2 permeability of palladium-silver (Pd-Ag) membranes caused by air oxidation

Hydrogen permeation measurements were performed at 300 °C for 25-μm cold-rolled Pd-Ag 25 wt% membranes before and after air oxidation at the same temperature as permeation. The air oxidation resulted in enhanced H₂ permeation through the membrane, as well as a roughening of the surface with the formation of surface grains and defects. The protruding grains can be leveled off by exposure to H₂ but the surface defects cannot. These microstructure changes are only on the membrane surfaces and do not create transmembrane defects that would allow permeation for gas species other than H₂. The H₂ permeability of the oxidized membrane increased by 25-90% compared to that of the as-received film at the same permeation condition, and the membranes retained perfect H₂ selectivity over N₂. The percent improvement of H₂ permeability decreases with increasing H₂ feed pressure. A new sorption kinetics hypothesis is proposed to elucidate the increase in H₂ permeability of Pd-Ag membranes caused by oxidation. H₂ solubility and sorption rate results were presented to test the new hypothesis. It is found that air oxidation does not change the H₂ solubility in Pd-Ag membranes, but enhances the H₂ sorption kinetics significantly. The extent of kinetics enhancement also decreases with increasing H₂ pressures. The much faster sorption equilibrium implies higher effective H₂ diffusivity at the Pd-Ag membrane surface for the oxidized sample and a higher transfer rate of atomic hydrogen from surface/sub-surface to the membrane bulk that contributes to the increase of H₂ permeability observed in experiments.     

Dynamic experiments with high bisphenol-A concentrations modelled with an ASM model extended to include a separate XOC degrading microorganism

The perspective of this work is to develop a model, which can be used to better understand and optimize wastewater treatment plants that are able to remove xenobiotic organic compounds (XOCs) in combination with removal of traditional pollutants. Results from dynamic experiments conducted with the endocrine disrupting XOC bisphenol-A (BPA) in an activated sludge process with real wastewater were used to hypothesize an ASM-based process model including aerobic growth of a specific BPA-degrading microorganism and sorption of BPA to sludge. A parameter estimation method was developed, which simultaneously utilizes steady-state background concentrations and dynamic step response data, as well as conceptual simplifications of the plant configuration. Validation results show that biodegradation of BPA is sensitive to operational conditions before and during the experiment and that the proposed model structure is capable of capturing important characteristics of the observed BPA removal, thus increasing the potential for generalizing knowledge obtained from plant specific experiments.     

Physico-chemical characteristics of full scale sewage sludges with implications to dewatering

An investigation was carried out for a variety of different sewage sludges in order to establish correlations between sludge composition, structure and dewatering properties. Results indicated that the fraction of extracellular polymeric substances (EPS) in sludges was the most important parameter with respect to sludge structure. With high EPS contents, sludges had a lower shear sensitivity and lower degree of dispersion. This in turn lead to better filterability in terms of low resistance to filtration (SRF). The floc stabilising role of EPS components was not consistent with DLVO-theory, as the zeta-potential increased with increased EPS content due to increased EPS charge content. This indicates that polymer entanglement is a key factor to stable floc structure. This does not rule out the possible change in dispersion due to changed electrostatic repulsion for a given EPS content. While EPS had a good effect on floc stability and filterability, the cake dry matter content decreased with large EPS contents. This could be due to an osmotic pressure related to the polymer charge quantity, or it could be caused by water entrapment in the floc structures. A high degree of sludge dispersion increased the cake dry matter content in filtration. This mechanism is, however, impractical due to high SRF and not important to conditioned sludge. In practice, dewatering also includes sludge expression. Taking this into account, osmosis related to EPS charges is likely to be increasingly important (increasing the negative effect of EPS content on cake dry matter).     

In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.