Radar cross-section study of cylindrical cavity-backed apertureswith outer or inner material coating: the case of H-polarization

A dual-series-based solution is obtained for the scattering of an H-polarized plane wave from a slitted infinite circular cylinder coated with absorbing material from inside or outside. For both cases, numerical results are presented for the radar cross section and comparisons are given for two different realistic absorbing materials. The radar cross-section dependencies are also given for the aspect angle of the scatterer and the thickness of the absorbing layer     

Facile synthesis of nitrogen and oxygen co-doped hierarchical porous carbon materials for high performance super capacitors

Journal of Porous Materials - Nitrogen and oxygen co-doped hierarchical porous carbons (NOPCs) is prepared by the pyrolysis of polyethylene glycol-200 (PEG) and triazine carbon forming agent (CFA)...     

酸、碱性条件下茜素红紫外-可见光谱的量子化学研究

茜素红(ARS)是葸醌类化合物中茜草素型的一种,被广泛应用于电化学、光谱学等领域的研究。在酸性溶液中,茜素红主要在260 nm和422 nm处出现明显的吸收峰,而在碱性溶液中吸收峰移动到272 nm和556 nm。为了分析不同溶液环境对茜素红吸收峰波长的影响,本研究在杂化密度泛函方法B3LYP/6-311+(d)水平上优化了ARS分子在酸、碱性情况时的稳定基态构型,并采用含时密度泛函(time-dependent density functional theory,TD-DFT)方法模拟了ARS分子的电子吸收光谱。计算结果与实验得到的紫外可见吸收光谱相吻合,说明密度泛函理论用来研究茜素红的紫外可见光谱是有效可靠的。通过计算还确定了每个吸收峰对应的各个电子跃迁的贡献率以及Mulliken电荷分布。该理论与实验的结合研究为茜草素型化合物的进一步应用、分子设计、药物构效关系和化学反应规律的研究提供了重要的参考依据。     

湿磨干烧生产线料浆脱水工艺的选择

料浆脱水是湿磨干烧的关键工艺，其脱水方法一般有过滤法，喷浆法和混合法三种，其中过滤法包括真空过滤和加压过滤两种，在国外都有应用，国内则大都用前者。南京院在皖维公司1000t/d生产线和白马山厂850t/d生产经上则采用了厢式压滤脱水法，文中就这两种过滤法的过滤工艺特点及其选择进行了分析和探讨。     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.     

IVR业务平台方案设计

探讨当前热门的移动增值业务——IVR业务技术组成及语音平台,阐述IVR的基本原理,分析IVR技术的基本构成,设计了IVR平台的两种方案,并在深入分析业务现状后,提出了建设性的意见和增加部分可操作性功能的设想。     

腐蚀套管剩余强度计算

借鉴API RP 579等标准推荐作法,研究了基于测井数据的缺陷描述方法、剩余强度计算方法。建立的腐蚀套管缺陷识别与剩余强度计算模型具有一定的适用性。     

Receptance coupling for end mills

Identification of chatter free cutting conditions, the chatter stability lobes, requires a measurement of the frequency response function (FRF) of each tool mounted on the spindle. This paper presents a method of assembling known dynamics of the spindle–tool holder with an analytically modeled end mill using the receptance coupling technique. The classical receptance technique is enhanced by proposing a method of identifying the end mill–spindle/tool holder joint dynamics, which include both translational and rotational degrees of freedom. The method requires measurement of FRFs with impact tests applied on the spindle–tool holder assembly and blank calibration cylinders attached to the spindle. The spindle and tool holder characteristics are completely identified from the two experiments, and used for the mathematical prediction of FRF for end mills with arbitrary dimensions. The proposed method is experimentally proven and verified in cutting tests.     

Feedrate Optimization for Spline Interpolation In High Speed Machine Tools

A feedrate optimization technique has been developed for minimizing the cycle time in machining spline toolpaths. Axis velocity, torque and jerk limits are considered throughout the motion in order to ensure smooth and linear operation of the servo drives with minimal tracking error. Feed modulation is achieved by manipulating segment durations which define the overall minimum jerk feed profile. Long toolpaths are handled by applying a windowing technique. The optimized feed profile allows nonzero acceleration and jerk values at segment connections, resulting in continuous and smooth motion within the velocity, torque, and jerk limits of the drives. The cycle time reduction obtained with the proposed technique is demonstrated in high speed contouring experiments.     

核电站堆芯温度场软测量方法研究

核电站堆芯内部温度是反应堆安全运行的重要参数,由于受到测点安装条件的限制,无法直接测量。为解决该问题,在现有压水堆堆芯功率模型的基础上,结合稳态传热热量守恒方程,构建堆芯温度场的计算模型,推算出堆芯内部温度。并通过数值模拟计算结果与堆芯出口实测值的比较,运用数据不确定度作为判断依据,验证了方法的可行性,得到了堆芯内部不同截面的二维温度分布图,为堆芯内部温度的实时监测提供了理论依据。