Effects of cold plasma treatment on alfalfa seed growth under simulated drought stress

The effect of different cold plasma treatments on the germination and seedling growth of alfalfa(Medicago sativa L.) seeds under simulated drought stress conditions was investigated.Polyethyleneglycol-6000(PEG 6000)with the mass fraction of 0%(purified water), 5%, 10%,and 15% were applied to simulate the drought environment. The alfalfa seeds were treated with15 different power levels ranged between 0–280 W for 15 s. The germination potential,germination rate, germination index, seedling root length, seedling height, and vigor index were investigated. Results indicated significant differences between treated with proper power and untreated alfalfa seeds. With the increase of treatment power, these indexes mentioned above almost presented bimodal curves. Under the different mass fractions of PEG 6000, results showed that the lower power led to increased germination, and the seedlings presented good adaptability to different drought conditions. Meanwhile, higher power levels resulted in a decreased germination rate. Seeds treated with 40 W resulted in higher germination potential,germination rate, seedling height, root length, and vigor index. Vigor indexes of the treated seeds under different PEG 6000 stresses increased by 38.68%, 43.91%, 74.34%, and 39.20%respectively compared to CK_(0-0), CK_(5-0), CK_(10-0), and CK_(15-0)(the control sample under 0%, 5%,10%, and 15% PEG 6000). Therefore, 40 W was regarded as the best treatment in this research.Although the trend indexes of alfalfa seeds treated with the same power were statistically the same under different PEG 6000 stresses, the cold plasma treatment had a significant effect on the adaptability of alfalfa seeds in different drought environments. Thus, this kind of treatment is worth implementing to promote seed growth under drought situations.     

加强石油企业投资评估咨询工作

投资评估咨询工作是投资决策的重要依据之一也是提高投资项目经济效益的关键文章从石油工业的特点出发论述了投资项目评估咨询的重要性在项目评估中要充分发挥咨询参谋作用抓好主业投资项目注重市场环境调研强化风险论证注重整体方案优化及做好信息收集工作最后强调评估工作要始终坚持经济效益原则     

基于 Ｐ Ｍ Ａ Ｃ 的多工位弹簧机自动换刀机构控制系统开发

根据自主设计的多工位弹簧机自动换刀机构的运行原理,构建了IPC+PMAC运动控制卡的上下位机的自动换刀控制系统,基于C#语言在Windows系统开发了人机交互界面,分析了换刀过程的逻辑框架,介绍了设计的下位机程序与上位机软件功能模块的实现方法。该控制系统功能齐全,操作简洁,可以满足多工位弹簧机自动换刀机构的实际工作要求。     

草地切根施肥补播复式改良机设计与试验

为改良退化草地,设计了一种多功能草地切根施肥补播复式作业机,可实现切根施肥、切根补播、切根施肥补播不同方式作业,解决了草地土壤坚实度高、残茬根系量大带来的切根阻力大、开沟入土难以及地表起伏不平、多坑洞石砾造成地轮滑移架空带来的播量不均问题,并进行了切根刀具刃口曲线优化和分层交错式覆土开沟装置及基于槽轮长度与转速同步控制的播量控制系统设计。优化得到,初始静态滑切角取40°,静态滑切角与极角的比例系数取—0.1时的正弦指数曲线为切根刀具最优刃口曲线;设计的分层交错式覆土开沟装置,采用破土刀齿破茬-种沟双圆盘开沟器开沟覆土-肥沟双圆盘开沟器压土成沟并覆盖种沟的工艺,实现草地低扰动开沟,田间试验结果表明,该方法能够实现稳定开沟,形成深47.3 mm、宽29.5 mm的肥床与深44.7 mm、宽19.9 mm的种床,且地表破坏率均值为14.2%,利于草地植被保护;设计的基于槽轮长度与转速同步控制的播量控制系统,通过采集机组左、右地轮转速频率信号进行比较,采用较大者控制槽轮转速与槽轮长度,实现播量与机组前进速度同步匹配与调节,Protues电路仿真结果表明,设计系统具备地轮转速频率信号比较、电机转...     

用Auto LISP编写城市测量成果表

介绍了用AutoLISP编写城市测量成果表程序的思路及处理方法,并列出了主要程序及实例。     

吉林市铁合金厂向第二松花江排放污染物的分布特征

吉林市铁合金厂排污口位于第二松花江的左岸,污水几乎垂直于江水流向而注入江水中。本文通过现场踏勘试验和取样分析,研究吉林市铁合金厂排污口下游的第二松花江污染物的垂向、横向和纵向分布特征。     

城市河道生态护坡技术的探讨

本文对城市河道的非生态护坡形式进行了分析，在充分吸收国内外河道整治方面和其他领域生态护坡的经验基础上，探讨河道生态护坡新技术，旨在为城市河道护坡建设提供参考。     

幸福灌区工程三项制度改革见成效

富锦市幸福灌区工程是该市水利工程建设实行三项制度改革的第一项工程,在今年１月“东北四省区在建水利工程质量大检查”中获得总分第一名,并得到国家及省地领导“力度大,进度快,质量好”的充分肯定。富锦市幸福灌区工程是三江平原综合治理的配套工程,黑龙江省农业综合开...