A Simulation Study on the Behavior of Magnetorheological Fluid on Herringbone-Grooved Hybrid Slot-Entry Bearing

Abstract

In recent years, extensive use of smart lubricants has been made in order to control the tribological performance of fluid film bearings. The grooved surfaces of the journal bearing greatly influence the performance of bearings. In the present work, various geometric shapes of herringbone grooves (rectangular, triangular, and parabolic) with groove angles (30° and 60°) have been considered to numerically simulate the performance of slot-entry bearings. The work reported in this article deals with the numerical simulation of magnetorheological (MR) fluid–lubricated slot-entry herringbone-grooved hybrid journal bearings. Dave equation, a constitutive relation of the Bingham model, was employed to simulate the flow behavior of MR fluid. Using the finite element method (FEM), the governing Reynolds equation for a hybrid slot-entry bearing model was solved. The result shows that the use of a herringbone-grooved surface and application of MR fluid in a slot-entry bearing offers better stability and higher fluid film stiffness and minimizes frictional torque.     

In vitro growth and drug sensitivity of tumor colony-forming units from human tumor xenografts

To investigate the feasibility of using tissue obtained from human tumor xenografts for in vitro screening of antineoplastic agents, we grew human tumor colony-forming units (CFU) in semisold agar from xenografts serially passaged in nude mice. Growth of human tumor CFU was accomplished from nine xenografts representing five different histological tumor types (ovarian carcinoma, adenocarcinoma of the colon, malignant melanoma, epidermoid carcinoma of the lung, and malignant astrocytoma). Cloning efficiency ranged from 0.04 to 0.1% and showed significant variability both between tumor types and between individual animals bearing the same type of xenograft. A high percentage of tumor CFU was in S phase [47 +/- 20% (S.D.)] as determined by the thymidine "suicide" technique. The number of tumor CFU observed increased linearly with increasing numbers of cells plated. In vitro drug sensitivity of the tumor CFU was assessed to Adriamycin, cis-platinum, and melphalan. The patterns of drug sensitivity were found to be reproducible and stable over a period of 9 months. Drug sensitivity curves to Adriamycin for five xenografts representing four tumor types showed complex patterns with plateau portions similar to those described for tumor CFU from primary tumors. The rank order of sensitivity of the tumors was compared to that of normal granulocyte-macrophage progenitors and, with the exception of the melanomas, was found to correlate well with clinical experience (order of sensitivity = colon less than ovary less than bone marrow). Growth of human tumor CFU from xenografts represents a reproducible and stable means for the study of the biology of tumor CFU and has potential applications as a means for screening new anticancer agents.     

Propagation dynamics of ultra-short high-power laser pulses in air: supercontinuum generation and transverse ring formation

Numerical and semi-analytical results of the propagation of high-power ultra-short near IR laser pulses propagating in ionizing air are presented.     

Thermooptic two-mode interference device for reconfigurable quantum optic circuits

Reconfigurable large-scale integrated quantum optic circuits require compact component having capability of accurate manipulation of quantum entanglement for quantum communication and information processing applications. Here, a thermooptic two-mode interference coupler has been introduced as a compact component for generation of reconfigurable complex multi-photons quantum interference. Both theoretical and experimental approaches are used for the demonstration of two-photon and four-photon quantum entanglement manipulated with thermooptic phase change in TMI region. Our results demonstrate complex multi-photon quantum interference with high fabrication tolerance and quantum fidelity in smaller dimension than previous thermooptic Mach–Zehnder implementations.     

Analysis of surface wave behavior in corrugated piezomagnetic layer resting on inhomogeneous half-space

This paper deals with propagation of Love type waves in a Piezomagnetic layer with corrugated boundaries overlying an inhomogeneous half-space. Inhomogeneity of elastic half-space is caused due to exponential variations in elastic parameters. Dispersion relations are obtained for magnetically open and short cases. Prominent effects of inhomogeneity, layer's width and corrugation on the phase velocity of considered wave are illustrated through graphs. Some particular cases are derived and exhibited through graphs. Also the influence of undulation parameter, elastic parameter, and piezomagnetic coefficient on phase velocity of considered wave has been marked separately. The present study finds its applications in designing and optimization of Love wave sensors and Seismic Acoustic Wave (SAW) devices. Findings may also be used for analytical study of wave propagation in piezomagnetic coupled structures.     

High performance multi-layer varistor (MLV) from doped ZnO nanopowders by water based tape casting: Rheology,sintering, microstructure and properties

In this work, we report the fabrication of a high performance multi-layer varistor (MLV) via water based tape casting method using novel compositions of nanomaterials. Bi₂O₃, CaO and Co₃O₄ doped ZnO nanopowders were prepared by solution combustion synthesis (SCS) route, calcined at different temperatures (550, 650, 750 and 850?°C) and characterized by TEM, XRD, SEM and AFM. The nanopowder (crystallite size ~30?nm) calcined at 650?°C for 1?h was used as the starting material for MLV fabrication. Compositions of the slurry containing doped ZnO nanopowders, binder and plasticizer in water solvent were optimized for the fabrication of thick film. The rheological properties of the slurries having different solid loadings were analysed and thick films of various thicknesses (50–500?µm) were prepared by varying the feeding rate of tape casting. The film roughness of 38.3?nm for the thick film made from 40?wt% solid slurry was found to be superior compared to other samples due to the presence of reduced crack and shrinkage. MLV fired at 950?°C for 1.5?h exhibited a coefficient of nonlinearity of 18 and breakdown voltage of 291.5?V that yields superior properties compared to commercial MLVs.     

An improved method for R-peak detection by using Shannon energy envelope

R-peaks in electrocardiogram (ECG) play a vital role in diagnosis of heart rhythm irregularities and also estimating heart rate variability. However, almost all existing R-peak detectors suffer from the non-stationary of both QRS morphology and noise. To overcome these difficulties, we propose a four-stage improved method to detect R-peak using Shannon energy envelope. In the first stage, noise is suppressed and QRS complex is enhanced by using band pass filter, first order differentiation, and amplitude normalization. In the second stage, Shannon energy envelope is extracted. In the third stage, peak is estimated without considering any threshold amplitude. In the final stage, true R-peaks are detected. Our proposed R-peak detection method is validated using 48 first channel ECG records of the MIT-BIH arrhythmia database with the accuracy of 99.84%, sensitivity of 99.95% and positive predictability of 99.88%. Our proposed method outperforms other well-known methods in case of pathological ECG signals.     

Computational Fluid Dynamics Modeling for Urea Hydrolysis in a Batch Reactor for Flue Gas Conditioning

A computational fluid dynamics (CFD) model is proposed to simulate urea hydrolysis for ammonia synthesis as a safe feed stock to flue gas conditioning in thermal power plants. A series of parametric studies to investigate flow rates, thermal boundary conditions, and reactor geometry was performed and operating conditions and reactor geometry were optimized. Detailed 3D flow, heat, and chemistry simulations of ammonia were carried out with predicted conversions comparable to measurements and the dependence of the experiments on the reaction parameters was evaluated. Through simulation under the same conditions the output was generated and compared to the experimental plot. Profiles of temperature and flow patterns were successfully achieved through simulation.