A cross-sectional study was carried out in rural areas of Jawan Block, District Aligarh, Uttar Pradesh, India, covering a total population of 3760 drawn from 11 villages. The total number of confirmed cases of rheumatic heart disease was 24 with a prevalence rate of 6.4 per 1000 of the general rural population. The prevalence of rheumatic heart disease increased with age until the age of 25 years. Females were more prone to rheumatic heart disease compared to males. Socio-economic class had a direct impact on the occurrence of rheumatic heart disease. 相似文献
A number of samples of thermally nitrided SiO2 with varying concentrations of electron traps were studied in an attempt to correlate the radiation-induced oxide charge with the number of electron traps. Also studied were the detrapping characteristics of irradiated devices. Etch-back experiments were performed to locate the centroid of the trapped charge. The results show that electron trapping does play a role in the improved radiation hardness of nitrided SiO2, but is not the sole cause of it 相似文献
Surrogate models have been widely applied to correlate design variables and performance parameters in turbomachinery optimization applications. With more design variables and uncertain factors taken into account in an optimization design problem, the mathematical relations between the design variables and the performance parameters might present linear, low-order nonlinear or even high-order nonlinear characteristics, and are usually analytically unknown. Therefore, it is required that surrogate models have high adaptability and prediction accuracy for both the linear and nonlinear characteristics. The paper mainly investigates the effectiveness of an adaptive region segmentation combining surrogate model based on support vector regression and kriging model applied to a transonic axial compressor to approximate the complicated relationships between geometrical variables and objective performance outputs with different sampling methods and sizes. The purpose is to explore the prediction accuracy and computational efficiency of this adaptive surrogate model in real turbomachinery applications. Three different sampling techniques are studied: (1) uniform design; (2) Latin hypercube sampling method; (3) Sobol quasi-random design. For the low dimensional case with five variables, the adaptive region segmentation combining surrogate model performs better (not worse) than the single component surrogate in terms of prediction accuracy and computational efficiency. In the meanwhile, it is also noted that the uniform design applied to the adaptive surrogate model has more advantages over the Latin hypercube sampling method especially for the small sample size cases, both performing better than the Sobol quasi-random design. Moreover, a high dimensional case with 12 variables is also utilized to further validate the prediction advantage of the adaptive region segmentation combining surrogate model over the single component surrogate, and the computational results favor it. Overall, the adaptive region segmentation combining surrogate model has produced acceptable to high prediction accuracy in presenting complex relationships between the geometrical variables and the objective performance outputs and performed robustly for a transonic axial compressor problem.
Measurements of the Hall coefficient, dc electrical conductivity, and magnetoresistance have been made on two highly compensated, plastically bent,n-type InSb samples from liquid helium to room temperature. The number and Hall mobility of charge carriers and the electrical conductivity are greatly affected by plastic bending. The mobility decreases appreciably and the number of charge carriers increases in both the deformed samples. This increase of effective charge carriers can be attributed to the introduction of effective donor centers due to plastic bending. The electrical conductivity in one of the deformed samples increases between the temperature ranges 4.2–15 K and 125–190 K compared to that of the undeformed state of the sample. This unusual increase in is attributed to the large increase inn value. The magnetoresistance at 4.2 K is due to impurity-band conduction and is found to be positive. It shows approximately a linear variation with magnetic field in both the deformed samples. The observed behavior of the magnetoresistance at 300 K is consistent with the behavior expected for free electrons. The observed / at 77.4 K is found to be less than that at 300 K and is explained in terms of the Hall mobility values at these two temperatures. 相似文献
A thermodynamic equilibrium model is developed for the distribution of iron(III) between phases of the system ferric sulfate-sulfuric
acid/β-alkenyl-8-hydroxyquinoline in xylene. Equilibrium data are obtained in the range [Fe]T (0.01 to 0.20 mol/dm3), pH (0.2 to 2.0), [HR] (0.02 to 0.06 mol/dm3) and temperatureT(298 to 323 K). The best fit of the data from a linear regression results in the following equation: % MathType!MTEF!2!1!+-%
feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaieYlf9irVeeu0dXdh9vqqj-hEeeu0x%
Xdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs% 0dXdbPYxe9vr0-vr0-vqpWqaaeaabaGaciaacaqabeaadaqaaqaaaO% qaaiGacYgacaGGUbWaaSaaaeaadaWadaqaamaanaaabaGaamOraiaa
The regression analysis employs the aqueous phase ionic concentration of [Fe+3] and [H+], which are obtained by consideration of pertinent aqueous phase species equilibria. This model includes the effects of ionic
strength on the aqueous phase equilibrium concentration. The stoichiometry of the given reaction is established using the
method of continuous variation. Presence of only one species in the organic phase is also determined by the method of continuous
variation. The results indicate that the enthalpy of the reaction and the entropy change are −21.8 kJ/mole and −0.05 J/mole
K, respectively. 相似文献
An unsteady state heat conduction model with a convective boundary condition is proposed for the drying of low-rank, high-porosity coals, such as lignites, during fluidized-bed combustion. The drying front is assumed to be the receding surface of a wet core. The solution technique for this moving boundary problem is based on the heat balance integral approach with immobilization of the moving boundary by a change in space variable. The governing cubic equation describing the drying curve in dimensionless form may be solved easily by the Newton—Raphson method. The model predictions are compared with experimental data for Mississippi lignite with excellent agreement. A correlation for estimation of total drying time is proposed. The temperature profiles obtained may be used for the study of the coupled drying and devolatilization in fluidized-bed combustors. The profiles could also be of importance in the study of formation of fissures/cracks in lignites subjected to intense heating conditions encountered during fluidized-bed combustion. 相似文献
Graft copolymers were prepared by irradiation of poly(oxyethylene), PEO, aqueous solutions in presence of acrylic acid. Chain transfer to PEO controls the graft length, the measured chain transfer constant of the acrylic acid radicals to PEO being 4.11 × 10?4 at 25°C. The drag reduction characteristics of the graft copolymers were measured in the Reynolds number range 104–105 in a smooth-walled tube, 0.635 cm inside diameter. The drag reduction falls to near zero as the solution pH is lowered to 3, evidence of the formation of a PEO-poly(acrylic acid) coacervate. 相似文献
The application of ultra-high-temperature ceramics (UHTCs) demands effective ways of joining in overcoming the problems associated with the fabrication of complex-shaped components. In this study, we choose to investigate a new method of rapidly joining pre-sintered TaC and HfC ceramics without any filler material using the spark plasma sintering (SPS) technique. A well-bonded TaC–HfC interface was observed with no apparent cracking and porosity at the joint. The joining mechanisms were predominantly driven by solid-state diffusion and localized plastic deformation. The nanomechanical properties of the TaC-HfC joint are better than the HfC while comparable to that of the TaC. High-load indentation (up to 200 N) results suggest that the TaC–HfC interface is stronger than the parent UHTCs with no crack propagating at the interface. Upon comparison with the parent UHTCs, the damaged area and the average crack length at the interface, reduced up to ~94% and ~56%, respectively. This study shows that the SPS technique can also apply to joining other UHTCs without any filler, resulting in the new field of developing complex components for the thermal protection system (TPS). 相似文献