A comparative study on the electronic and optical properties of Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> thin film

The thin film of Sb₂Se₃ was deposited by thermal evaporation method and the film was annealed in N₂ flow in a three zone furnace at a temperature of 290°С for 30 min. The structural properties were characterized by scanning electron microscopy (SEM), transmission electron microscopy (ТЕМ), X-ray diffraction (XRD) and Raman spectroscopy, respectively. It is seen that the as-deposited film is amorphous and the annealed film is polycrystalline in nature. The surface of Sb₂Se₃ film is oxidized with a thickness of 1.15 nm investigated by X-ray photolecetron spectroscopy (XPS) measurement. Spectroscopic ellipsometry (SE) and UV–vis spectroscopy measurements were carried out to study the optical properties of Sb₂Se₃ film. In addition, the first principles calculations were applied to study the electronic and optical properties of Sb₂Se₃. From the theoretical calculation it is seen that Sb₂Se₃ is intrinsically an indirect band gap semiconductor. Importantly, the experimental band gap is in good agreement with the theoretical band gap. Furthermore, the experimental values of n, k, ε₁, and ε₂ are much closer to the theoretical results. However, the obtained large dielectric constants and refractive index values suggest that exciton binding energy in Sb₂Se₃ should be relatively small and an antireflective coating is recommended to enhance the light absorption of Sb₂Se₃ for thin film solar cells application.     

Feasibility and performance evaluation of a 6LoWPAN‐enabled platform for ubiquitous healthcare monitoring

Technology has revolutionized medical practices by enabling more convenient and non‐intrusive monitoring of patient's health, leading to next generation ubiquitous healthcare (u‐healthcare). The exploitation of the Internet protocol version 6 addressing space along with the miniaturization of electronic devices has fostered providing interoperability and connectivity of wearable sensor devices in wireless body area networks to the Internet of Things. In this paper, we propose to integrate the IPv6 over low power wireless personal area network (6LoWPAN) to the u‐healthcare monitoring system architecture. The main objective is to study the feasibility of the 6LoWPAN‐enabled platform in real‐world scenarios dealing with medical data. The performance evaluation of this platform is carried out initially through simulations using OMNet++ and then supported by an experimental study using sensor motes and a customized micro‐computing unit. Performance metrics such as throughput, end‐to‐end delay, packet error rate, and energy consumption are investigated under acute health conditions, where patient's health information has to be sent continuously and at maximum rate to the care provider. The obtained results show that the proposed 6LoWPAN solution fulfills the main quality of service requirements of u‐healthcare applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Traffic differentiation support in vehicular delay-tolerant networks

Vehicular Delay-Tolerant Networking (VDTN) is a Delay-Tolerant Network (DTN) based architecture concept for transit networks, where vehicles movement and their bundle relaying service is opportunistically exploited to enable non-real time applications, under environments prone to connectivity disruptions, network partitions and potentially long delays. In VDTNs, network resources may be limited, for instance due to physical constraints of the network nodes. In order to be able to prioritize applications traffic according to its requirements in such constrained scenarios, traffic differentiation mechanisms must be introduced at the VDTN architecture. This work considers a priority classes of service (CoS) model and investigates how different buffer management strategies can be combined with drop and scheduling policies, to provide strict priority based services, or to provide custom allocation of network resources. The efficiency and tradeoffs of these proposals is evaluated through extensive simulation.     

TD-LTE:抢占无线全新商机带动全球发展势态

LTE是目前大部分电信运营商首选的下一代移动通信技术,已有100多家运营商承诺将于2010年开始部署LTE.不过,在非成对频段部署LTE的商机却常被忽略.     

Search me if you can: Multiple mix zones with location privacy protection for mapping services

The mobile vehicle is gaining popularity nowadays using map services like Google Maps and other mapping services. However, map services users have to expose sensitive information like geographic locations (GPS coordinates) or address to personal privacy concerns as users share their locations and queries to obtain desired services. Existing mix zones location privacy protection methods are most general purposed and theoretical value while not applicable when applied to provide location privacy for map service users. In this paper, we present new (multiple mix zones location privacy protection) MMLPP method specially designed for map services on mobile vehicles over the road network. This method enables mobile vehicle users to query a route between 2 endpoints on the map, without revealing any confidential location and queries information. The basic idea is to strategically endpoints to nearby ones, such that (1) the semantic meanings encoded in these endpoints (eg, their GPS coordinates) change much, ie, location privacy is protected; (2) the routes returned by map services little change, ie, services usability are maintained. Specifically, a mobile client first privately retrieves point of interest close to the original endpoints, and then selects 2 points of interest as the shifted endpoints satisfying the property of geoindistinguishability. We evaluate our MMLPP approach road network application for GTMobiSim on different scales of map services and conduct experiments with real traces. Results show that MMLPP strikes a good balance between location privacy and service usability.     

Performance evaluation and implementation complexity analysis framework for ZF based linear massive MIMO detection

Wireless Networks - This paper discusses a framework for algorithm-architecture synergy for (1) performance evaluation and (2) FPGA implementation complexity analysis of linear massive MIMO...     

Critical thickness of GaAs/InGaAs and AlGaAs/GaAsP strained quantum wells grown by organometallic chemical vapor deposition

In this paper we describe a study of strained quantum wells (QWs) as a means to experimentally observe the critical thickness (h _c) for the formation of interfacial misfit dislocations. Two material systems were investigated: GaAs/In_0.11Ga_0.89As, in which the QW layers are under biaxialcompression, and Al_0.35Ga_0.65As/GaAs_0.82P_0.18, in which the QW layers are under biaxialtension. Samples were grown by atmospheric pressure organometallic chemical vapor deposition, and characterized by low-temperature photoluminescence (PL), x-ray diffraction, optical microscopy, and Hall measurements. For both material systems, the observed onset of dislocation formation agrees well with the force-balance model assuming a double-kink mechanism. However, overall results indicate that the relaxation is inhomogeneous. Annealing at 800–850° C had no significant effect on the PL spectra, signifying that even layers that have exceededh _c and have undergone partial relaxation are thermodynamically stable against further dislocation propagation.     

The influence of substrate temperature on the structural and optical properties of ZnS thin films

Thin films of ZnS were deposited on soda lime glass substrates by a modified close-space sublimation technique. The change in optical and structural properties of the films deposited at various substrate temperatures (150–450°C) was investigated. X-ray diffraction spectra showed that films were polycrystalline in nature having cubic structure oriented only along (111) plan. The crystallinity of films increased with the substrate temperature up to 250°C. However, crystallinity decreased with further increase of substrate temperature and films became amorphous at 450°C. The atomic force microscopy data revealed that the films become more uniform and dense with the increase of substrate temperature. Optical properties of the films were determined from the transmittance data using Swanepoel model. It was observed that the energy band gap is increased from 3.52 to 3.65 eV and refractive index of the films are decreased with the increase of substrate temperature. Moreover, considerable improvement in blue response of the films was noticed with increasing substrate temperature.