LiErO2 formation on Er2O3 in static and natural convection lithium

Er₂O₃ is candidate material for insulating coating to prevent the magnetohydrodynamic (MHD) pressure drop in the self-cooled liquid Li blanket system. Although Er₂O₃ is stable material, detailed chemical behavior in liquid Li is not clear. Corrosion behavior of bulk Er₂O₃ in Li is investigated in static and flowing condition in the present study. After these tests, good compatibility of Er₂O₃ was confirmed and slight formation of LiErO₂ was detected by XRD analysis. This chemical behavior did not change in a static and flowing tests, however some of the corrosion product of LiErO₂ was removed easily by the Li flow. Intensity of LiErO₂ peaks in XRD spectrum suggests that the temperature gradient may affect the reaction rate in the natural convection loop. Since corrosion rate of Er₂O₃ is very small, slight change in state will be important information to evaluate lifetime of coating.     

AstroSim: Collaborative Visualization of an Astrophysics Simulation in Second Life

Developed in the Second Life 3D online multiuser environment, AstroSim (astrophysics simulation) provides synchronous collaborative visualization for astronomers. Users can play, halt, and rewind simulations and annotate stars interactively to track individual stars and gain a better understanding of stellar dynamics and astrophysics phenomena. This article is part of a special issue on collaborative visualization.     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

Fragmentation of the large subunit of ribulose-1,5-bisphosphate carboxylase by reactive oxygen species occurs near Gly-329

The large subunit (LSU) of ribulose-1,5-bisphosphate carboxylase/oxygenase (rubisco) in the illuminated lysates of wheat (Triticum aestivum L.) chloroplasts is broken down by reactive oxygen radicals into 37- and 16-kDa polypeptides. Analysis of the terminal amino acid residues of both fragments revealed that the C terminus of the 37-kDa fragment was Ser-328 and the N terminus of the 16-kDa fragment was Thr-330. Gly-329, which links the two fragments, was missing, suggesting that the fragmentation of the LSU in the lysates driven by oxygen-free radicals occurs at Gly-329. Purified rubisco, exposed to a hydroxyl radical-generating system, was also cleaved at the same site of the LSU. The cleavage site was positioned at the N-terminal end of the flexible loop (loop 6) within the beta/alpha-barrel domain, constituting the catalytic site of rubisco. The binding of a reaction intermediate analogue, 2-carboxyarabinitol 1,5-bisphosphate, to the active form of rubisco completely protected the enzyme from the fragmentation. The fragmentation was differentially affected by CO2, Mg2+, ribulose 1, 5-bisphosphate, or 2-carboxyarabinitol 1,5-bisphosphate. All these results indicate that the conformation of the catalytic site of the enzyme is involved as an important factor determining the breakdown of rubisco by reactive oxygen species. Reactive oxygen species generated at its catalytic site by a Fenton-type reaction may trigger the site-specific degradation of the LSU in the lysates of chloroplasts in the light.     

Theory of powdered metal formation in electrochemistry—morphological instability in galvanostatic crystal growth under diffusion control

Following the presentation of the theory of powder formation in steady state electrocrystallization, some equations based on the linear instability theory in non-steady state deposition under diffusion control were derived; the galvanostatic case was then analysed using the theoretical equations obtained here.As a result, the dependences of powder growth and particle size on various physical parameters, such as current density, bulk concentration and temperature, were made quantitatively clear. Furthermore, a reliable basis was given to the induction time of powder formation which had formerly been liable to amibiguous discussion.     

Resistivity changes of heavily-boron-doped CVD-prepared polycrystalline silicon caused by thermal annealing

Heavily-boron-doped polycrystalline Si films were deposited at 600°C on thermally grown SiO₂ by the thermal decomposition of SiH₄-BCl₃-H₂ mixture. Resistivity changes with isochronal or sequential annealing were systematically examined. Temperature dependence of equilibrium saturation carrier concentration was determined at 800 ～ 1100°C. Since as-deposited polycrystalline Si is in the super-saturated state, carrier concentration decreases from the super-saturated to equilibrium saturation value by annealings over 700°C for poly Si doped with over 2 × 10²⁰ cm^?3 resulting in anomalous resistivity change. Carrier concentration changes reversibly between saturation values with sequential annealing and is determined by the last annealing temperature when the annealing time is long enough. Mobility increases with annealing temperature, however, less increase is found for heavily doped poly Si, which is attributed to the suppression of grain growth caused by electrically inactive Si-B compounds.     

Determination of magnetic anisotropy constants for bubble garnet epitaxial films using field orientation dependence in ferromagnetic resonances

Cubic magnetocrystalline anisotropy constant K₁ as well as uniaxial anisotropy constant K_u and gyromagnetic ratio γ are precisely determined for (111) magnetic garnet epitaxial films from measurements on FMR field orientation dependence. Strict FMR conditions are derived from total free energy expressions, where the differences between magnetization direction and applied field direction are taken into consideration. By applying magnetic field in (110) plane, FMR is measured to obtain the three best fitting parameters of K₁, K_u and γ. Present analysis is compared with Cronemeyer et al's analysis. Influence of sample misalignment on measurement accuracy is also presented. Similarly, for (110) garnet films with orthorhombic magnetic anisotropy, measurements are carried out for two crystallographic planes of (001) and (110), and the four best fitting parameters of K₁, K_u, δ and γ are determined.     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Random-coiled conformation of polypeptide chains

Summary Random-coiled conformation of poly(L-leucine), which has -branched side-chain, was theoretically analyzed by a conformational energy calculation based on intra-residue interactions. Calculated characteristic ratio 7.62 was obtained by using the transformation matrix statistically averaged over the entire side-chain conformational space of L-Leu residue. This value is smaller than those of poly(L-phenylalanine) (11.24) and poly(L-tyrosine) (12.33) which have -branched side-chain.