Molecular Determinants of West Nile Virus Virulence and Pathogenesis in Vertebrate and Invertebrate Hosts

West Nile virus (WNV), like the dengue virus (DENV) and yellow fever virus (YFV), are major arboviruses belonging to the Flavivirus genus. WNV is emerging or endemic in many countries around the world, affecting humans and other vertebrates. Since 1999, it has been considered to be a major public and veterinary health problem, causing diverse pathologies, ranging from a mild febrile state to severe neurological damage and death. WNV is transmitted in a bird–mosquito–bird cycle, and can occasionally infect humans and horses, both highly susceptible to the virus but considered dead-end hosts. Many studies have investigated the molecular determinants of WNV virulence, mainly with the ultimate objective of guiding vaccine development. Several vaccines are used in horses in different parts of the world, but there are no licensed WNV vaccines for humans, suggesting the need for greater understanding of the molecular determinants of virulence and antigenicity in different hosts. Owing to technical and economic considerations, WNV virulence factors have essentially been studied in rodent models, and the results cannot always be transported to mosquito vectors or to avian hosts. In this review, the known molecular determinants of WNV virulence, according to invertebrate (mosquitoes) or vertebrate hosts (mammalian and avian), are presented and discussed. This overview will highlight the differences and similarities found between WNV hosts and models, to provide a foundation for the prediction and anticipation of WNV re-emergence and its risk of global spread.     

Dopants adsorbed as single atoms prevent degradation of catalysts

The design of catalysts with desired chemical and thermal properties is viewed as a grand challenge for scientists and engineers. For operation at high temperatures, stability against structural transformations is a key requirement. Although doping has been found to impede degradation, the lack of atomistic understanding of the pertinent mechanism has hindered optimization. For example, porous gamma-Al(2)O(3), a widely used catalyst and catalytic support, transforms to non-porous alpha-Al(2)O(3) at approximately 1,100 degrees C (refs 7-10). Doping with La raises the transformation temperature to approximately 1,250 degrees C, but it has not been possible to establish if La atoms enter the bulk, adsorb on surfaces as single atoms or clusters, or form surface compounds. Here, we use direct imaging by aberration-corrected Z-contrast scanning transmission electron microscopy coupled with extended X-ray absorption fine structure and first-principles calculations to demonstrate that, contrary to expectations, stabilization is achieved by isolated La atoms adsorbed on the surface. Strong binding and mutual repulsion of La atoms effectively pin the surface and inhibit both sintering and the transformation to alpha-Al(2)O(3). The results provide the first guidelines for the choice of dopants to prevent thermal degradation of catalysts and other porous materials.     

Probing Bias‐Dependent Electrochemical Gas–Solid Reactions in (LaxSr1–x)CoO3–δ Cathode Materials

Spatial variability of bias‐dependent electrochemical processes on a (La_0.5Sr_0.5)₂CoO_4±δ modified (La_xSr_1–x)CoO_3–δ surface is studied using first‐order reversal curve method in electrochemical strain microscopy (ESM). The oxygen reduction/evolution reaction (ORR/OER) is activated at voltages as low as 3–4 V with respect to bottom electrode. The degree of bias‐induced transformation as quantified by ESM hysteresis loop area increases with applied bias. The variability of electrochemical activity is explored using correlation analysis and the ORR/OER is shown to be activated in grains at relatively low biases, but the final reaction rate is relatively small. At the same time, at grain boundaries, the onset of reaction process corresponds to larger voltages, but limiting reactivity is much higher. The reaction mechanism in ESM of mixed electronic‐ionic conductor is further analyzed. These studies both establish the framework for probing bias‐dependent electrochemical processes in solids and demonstrate rich spectrum of electrochemical transformations underpinning catalytic activity in cobaltites.     

Epidemiology of porcine reproductive and respiratory syndrome (PRRS): an overview

PRRS disease was first recognised in the USA in 1987 and in Europe in 1990 and since then the disease has spread widely throughout many pig-producing countries. After a severe epidemic phase, the infection has become endemic. The prevalence of infection is generally high in infected countries. However, in areas with a low density of pigs, infection may spread slowly and if infected animal movements are not significant, farm-to-farm spread can be controlled and prevalence of infection maintained at a low level. The PRRS virus (PRRSV) was completely unknown before 1986, and the question of its origin remains unanswered. The exact epidemiologic relationship between American and European strains of PRRSV is difficult to establish because different isolates appear to belong to two distinct sub-populations which are only distantly antigenically related. In the environment, virus survival is optimal when temperature is cold and when ultra-violet light exposure is low (little sunshine). These conditions are easily attained in winter and that may explain why virus spread increases during this period. Pigs of any age (including wild boars) are the only animals known to be naturally infected with PRRSV. Relatively close contact between pigs is the primary factor in virus transmission. Aerial transmission is a second mechanism of spread, particularly in winter and particularly over distances of less than 3 km. A third route of transmission is via semen. The role of fomites is not clearly documented, however since the virus is excreted in faeces and urine, slurry should be considered as a potential source of contamination. Within herds, the virus spreads rapidly with up to 85 to 95% of pigs in a herd becoming sero-positive within two to three months. Thereafter, virus activity persists for extended periods (several month to years). Nevertheless, some authors have reported spontaneous elimination of PRRSV from infected farms. For the future, there remain questions concerning the possible evolution of the disease (in terms of its sanitary and economic impacts), and the possible influence of vaccines on the epidemiological features of PRRS.     

Crystalline Structure and Dielectric Properties of Li1+x−yNb1−x−3yTix+4yO3M-Phase Solid Solutions

The structure and dielectric properties of the so-called M -phase solid solutions in the Li₂O–Nb₂O₅–TiO₂system have been investigated. Detailed studies of the lattice parameters of these phases agree well with structure models based on intergrowths of LiNbO₃slabs with a titanium-rich corundum-type layer. The relative permittivity ranges from ∼80 to ∼55; microwave quality factors increase with the titanium content, reaching values of Q × f = 9000 at 6 GHz. The temperature coefficient of the resonant frequency changes sign within the solid solution region, thus permitting tunability to a zero value. All the compositions can be sintered to high density at temperatures ≤1100°C.     

Preparation of One-Phase Superconducting Powder of the Y – Ba – Cu – O System

We describe methods for obtaining homogeneous yttrium high-temperature superconducting powders (123 phase): solid-phase synthesis, the chemical method, and explosive compression. The effect of the starting components in the mix and the technological conditions on the phase composition of the powders has been studied. It was shown that it is possible to obtain high-temperature superconducting materials with 100% YBa₂Cu₃O_{7 _ δ} phase.     

Impact of the surface roughness on the electrical capacitance

A new hybrid approach consists to use the advantages of both systems namely the high geometric aspects of the electrodes of the ultracapacitor and the high dielectric strength of polymer materials used in dielectric capacitors. The surface roughness of the electrodes of the ultracapacitor is manufactured with nano-porous materials; activated carbon and carbon nanotubes (CNTs).Many compositions of both carbonaceous materials are tested with different insulating materials (liquid and solid) to constitute the hybrid capacitor. It appears that the capacitance increases with the carbonaceous composition: An increasing from 15 to 40% is observed as compared to a plane capacitor, it can be twice with a 100 wt% of CNTs content. But, the impregnation of the insulating material in the surface roughness remains the key point of the realization of the hybrid capacitor. The roughness accessibility is a major property to optimize in order to improve the impregnation of the insulating material to increase the electrical capacitance.     

Emissions from multiple-spouted and spout-fluid fluidized beds using rice husks as fuel

This paper presents the experimental results of the emissions of CO and CO₂ using rice husks as fuel on different configurations of spout-sluidized beds namely, multiple-spouted and spout-fluid fluidized bed. The emission of pollutants from the multiple-spouted bed and spout-fluid bed was investigated with rice husk fuel. The operating parameters considered were the different levels of excess air, different primary-to-secondary air ratios at each level of excess air and method of feeding. It was found that emission of CO from the multiple-spouted bed seemed to be lower with under-bed feeding of the rice husk fuel compared to over-bed feeding. However, the emission of CO₂ did not change significantly for both methods of feeding. Changes in excess air levels influenced the emissions of CO and CO₂ from the multiple-spouted bed within the excess air range investigated. It was found that emission of CO was less at 10% excess air with over-bed feeding; emission of CO in the case of under-bed feeding was lowest at 20% excess air level. It was found that the method of feeding had not significantly influenced the emission of CO and CO₂ in the spout-fluid bed. The combustion efficiency however, in general, was slightly higher in the case of under-bed feeding compared to over-bed feeding. Emission of CO was less in the spout-fluid bed compared with the emission of CO in the multiple-spouted bed. The result can be likely attributed to the higher combustion efficiency attained by the spout-fluid bed compared with that of multiple-spouted bed.     

Emission factors of wood and charcoal-fired cookstoves

In the developing countries, energy required for cooking often has the biggest share in the total national energy demand and is normally met mostly by biomass. This paper presents the results of experimental studies on emission conducted on a number of traditional and improved cookstoves collected from different Asian countries using wood and charcoal as fuel. The emission factors from this study are comparable to those reported in the literature. In the case of wood combustion, CO₂ emission factor is in the range of 1560–1620 g kg⁻¹. The emission factors for pollutants CO, CH₄, TNMOC and NO_x were in the ranges 19–136, 6–10, 6–9 and 0.05–0.2 g kg⁻¹, respectively. In the case of charcoal combustion, CO₂ emission factor is in the range of 2155–2567 g kg⁻¹. The emission factors for pollutants CO, CH₄, TNMOC were in the ranges 35–198, 6.7–7.8, 6–10 g kg⁻¹, respectively.

Comparison between wood and charcoal fired stoves shows that, CO₂ and CO emission factor values for wood are lower as compared to charcoal. CH₄ and TNMOC emission factors for wood are with the same range as compared to charcoal. Emission factors for NO_x using wood is slightly lower than charcoal. The emission of all the pollutants per unit of useful heat was found to decrease with increasing stove efficiency for both wood and charcoal fired stoves.