Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization

Composites based on poly(diphenyl amine) (PDPA) and multiwall carbon nanotubes (MWNTs) were prepared by chemical oxidative polymerization through two different approaches: in situ polymerization and intimate mixing. In in situ polymerization, DPA was polymerized in the presence of dispersed MWNTs in sulfuric acid medium for different molar composition ratios of MWNT and DPA. Intimate mixing of synthesized PDPA with MWNT was also used for the preparation of PDPA/MWNT composites. Transmission electron microscopy revealed that the diameter of the tubular structure for the composite was 10–20 nm higher than the diameter of pure MWNT. Scanning electron microscopy provided evidence for the differences in the morphology between the MWNTs and the composites. Raman and Fourier transform IR (FTIR) spectroscopy, thermogravimetric analysis, X‐ray diffraction, and UV–visible spectroscopy were used to characterize the composites and reveal the differences in the molecular level interactions between the components in the composites. The Raman and FTIR spectral results revealed doping‐type molecular interactions and coordinate covalent‐type interactions between MWNT and PDPA in the composite prepared by in situ polymerization and intimate mixing, respectively. The backbone structure of PDPA in the composite decomposed at a higher temperature (>340°C) than the pristine PDPA (～300°C). This behavior also favored the molecular level interactions between MWNT and PDPA in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3721–3729, 2006     

PROBING HIDDEN POLYMERIC INTERFACES USINGIR-VISIBLE SUM-FREQUENCY GENERATION SPECTROSCOPY

Understanding the molecular-level processes underlying interfacial phenomena is important in the area of adhesion. We briefly introduce IR-visible sum-frequency generation spectroscopy (SFG) using a total-internal-reflection geometry for the study of polymer-air, polymer-solid, and polymer-polymer interfaces. The following examples, predominantly of work done in our lab, illustrating differences in molecular structure and dynamic properties at interfaces are presented: the air- and solid-interface structure of an amorphous polystyrene (PS) and a semicrystalline polymer with side-chain crystallinity, poly(octadecyl acrylate) (PA-18); structure of a polymer-polymer interface between thin films of a semicrystalline polymer with side-chain crystallinity, poly(vinyl-N-octadecylcarbamate- co-vinyl acetate), and an amorphous PS; thermal order-to-disorder transitions of the air and solid interface of PA-18, and the interface of this polymer with PS; and dynamic surface-relaxation studies of a rubbed PS film.     

3，4-二氢吡咯[2，1-c][1，4]噘嗪-1-酮及其7-芳酰基衍生物的设计与合成

以2-吡咯基三氯乙酮为主要原料,经过乙二醇单酯化、羟基氯取代、环合三步反应制得了3,4-二氢吡咯[2,1-c][1,4]噁嗪-1-酮;又经过Friedel—Crafts酰基化和环合反应制得了未见文献报道的7-芳酰基-3,4-二氢吡咯[2,1-c][1,4]噁嗪-1-酮它们及其某些重要中间体的结构分别采用红外光谱、质谱、核磁共振氢谱、核磁共振碳谱以及高分辨率质谱进行了表征．     

Magnetic Behavior of Trinuclear Vanadium(II)–Diamine Complexes. Part 2. Large Intramolecular Antiferromagnetic Exchange Interactions in a Triangular Unit

This study reports the magnetic structures of newly reported trinuclear vanadium(II)–diamine complexes. Using the isotropic Heisenberg exchange Hamiltonian, it is suggested that there are strong intramolecular antiferromagnetic interactions among the vanadium(II) ions. It is also suggested that these complexes are good candidates to the geometrically frustrated systems. For part 1 see A. Bayri, J. Inorg. Organomet. Polym. Mater., (in press) An erratum to this article can be found at     

Antiferromagnetic Exchange Interactions. Part 1. Newly Reported Nickel(II) Complex of the Antiprine Schiff Base of 3-Formylsalicylic Acid

This study reports the magnetic properties of newly reported nickel(II) complex of the antiprine Schiff base of 3-formylsalicylic acid. Using the isotropic magnetic interaction model it is suggested that there is a strong antiferromagnetic interactions between metal centers in dimeric units. It is also suggested that the system become demagnetized below a certain temperature. An erratum to this article can be found at     

Physical properties of electron beam irradiated poly(vinyl butyral) composites with carbamate,imidazole, and tetrazolium dye

Films of poly(vinyl butyral) composites with triphenyl tetrazolium chloride dye (TTC) and the antioxidant nickel dibutyl dithiocarbamate (NBC) or 2‐mercaptobenzimidazole (MBI) were prepared by the solution casting method using butyl alcohol as a solvent. The effect of various doses of electron beam irradiation (50–200 kGy) on color response, thermal, and mechanical properties were investigated. The color measurements showed that the films of the different composites possessed a high sensitivity to electron beam irradiation, in which the nearly colorless films were changed to deep red color, which can be easily detected by visual observations. In addition, the change in color depends on irradiation dose and the contents of the TTC dye. Moreover, the presence of the antioxidants NBC or MBI has no effect on the development of color. However, PVB/TTC and PVB/TTC/MBI composites showed high regular change in color as a function of irradiation dose. The thermogravimetric analysis used to study the thermal stability indicated that PVB/TTC composites either before or after electron beam irradiation are thermally more stable than neat PVB polymer. The presence of the antioxidants NBC or MBI offered protection to PVB/TTC composites against decomposition or oxidative degradation resulted from irradiation. Blending unirradiated PVB with TTC dye, mixture of TTC and NBC, and mixture of TTC and MBI reduced the tensile strength by 4, 20, and 17% upon blending, respectively. However, the reduction in tensile strength of the entire composite films (～7% based on the initial value) upon exposure to a dose of 50 kGy is acceptable for practical applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4358–4365, 2006     

Comparing emulsion polymerization of methacrylate-monomers with different hydrophilicity

A comprehensive experimental study concerning the influence of various types of initiator-emulsifier systems on emulsion polymerization of methacrylate monomers (2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA) and butyl methacrylate (BMA)) reveals interesting relations between initiator and surfactant hydrophilicity on the one hand and the hydrophilicity of the monomers on the other hand. For the water-soluble HEMA stable latexes are only obtained if hydrophobic initiators such as 2,2′-azobisisobutyronitrile or dibenzoyl peroxide in combination with alkyl sulfate surfactants with carbon chain lengths greater than 10 or surface active initiators of the 2,2′-azobis(N-2′-methylpropanoyl-2-amino-alkyl-1)-sulfonate type with alkyl chain lengths greater than 8 are employed. Stable nano size range poly(2-hydroxyethyl methacrylate) (PHEMA) particles have been prepared also by batch emulsion polymerization using ionic surface active initiators (inisurfs). The results clearly show that the formation of stable latex particles requires a proper choice of the initiator-emulsifier system regarding its hydrophilic-hydrophobic balance. The PHEMA particles prepared with surface-active initiators keep their identity and spherical shape even in the dried state whereas in the case of the other initiator-emulsifier systems complete coagulation and coalescence occurs during drying.     

Profile based routing in vehicular ad-hoc networks

One of the main problems in the VANET(vehicular ad-hoc network)routing algorithms is how to establish the stable routes.The link duration in these networks is often very short because of the frequent changes in the network topology.Short link duration reduce the network efficiency.Different speeds of the vehicles and choosing different directions by the vehicles in the junctions are the two reasons that lead to link breakage and a reduction in link duration.Several routing protocols have been proposed for VANET in order to improve the link duration,while none of them avoids the link breakages caused by the second reason.In this paper,a new method for routing algorithms is proposed based on the vehicles trips history.Here,each vehicle has a profile containing its movement patterns extracted from its trips history.The next direction which each vehicle may choose at the next junction is predicted using this profile and is sent to other vehicles.Afterward each vehicle selects a node the future direction of which is the same as its predicted direction.Our case study indicates that applying our proposed method to ROMSGP(receive on most stable group-path)routing protocol reduces the links breakages and increases the link duration time.     

Indoor positioning: “an image-based crowdsource machine learning approach”

Multimedia Tools and Applications - Various technologies have been utilized today for recognizing client or user in the indoor areas. These technologies incorporate RSSI, Bluetooth Low Energy...