Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

The Nickel base Superalloys are the most famous complicated and useable of Superalloys to make hot zone components of the gas turbines. The complicated dimensional tolerances, specially at the root of the blade show importance of grinding processes at the production of blades root. The prediction of the effect of machining parameters on the soundness of component surface strengthening for reaching to a suitable surface finishing and avoiding from crack formation at the work part during machining operation often is not easy and feasible so needs to more industrial investigation.This research is about frame 5 blade designed by GE and made from Superalloy IN738LC has been investigated. The formation of a plastically deformed and heat affected zone during grinding of Superalloy IN738LC with a high depth of cut but slow work speed (creep feed grinding) was investigated. Parameters such as work speed, depth of cut and radial dressing speed have been considered as variables and their effects have been studied. During experimental performed, the voltage and current of motor measured and power and special energy calculated.Some samples heat-treated (of the 1176℃ for 1 hr under neutral argon gas and cooling rate of 15℃/min up to 537℃ and then air cooling) to study grains recrystallization. Other samples have been created from the roots of blades and then coated by Nickel to measure boundary layer micro-hardness. The results show that increasing work speed leads to increasing the use power. Increasing the depth of cut, by increasing material removal rate, and the radial dressing speed, by decreasing power, lead to decreasing special energy. The temperature created by grinding lead to decreasing plastic deformation and boundary layer formation. When the radial dressing speed changes from 1 to 0.6μm/rev and other parameters are kept unchanged the roughness of surface increases and the special energy decreases. Sufficient dressing is very essential in limiting the width of the molten zone to few micrometers. As a result, it was found that local melting at contact spots to be a rather common mechanism during grinding of superalloys, lead to so-called white layers which can easily be observed on metallographic cross sections.     

脉冲涡流和电磁声换能器双探头无损检测

在许多情况下，只应用一种NDT技术存在不足，这就迫使NDT操作人员使用一种以上的技术以保证检测出危害被检物使用寿命或功能的缺陷。但分别实施多种技术的检测，就会延长检验时间。介绍了一种新的NDT设施，采用两种不同的非接触无损检测技术进行互补，即电磁声换能器（EMAT）和脉冲涡流（PEC）探头。检测结果表明，脉冲涡流和电磁声换能器因是非接触，所以可应用于材料生产过程中的自动在线检验，也可用于在役检验。     

Study of the antiferromagnetic phase in Sm(Mn1−xCrx)2Ge2

Magnetic and thermal expansion measurements have been carried out on the polycrystalline Sm(Mn_1−xCr_x)₂Ge₂ samples to see how the antiferromagnetie (AFMII) region in SmMn₂Ge₂ is affected by Cr substitution. It is found that the antiferromagnetic region disappears for samples with less than 2 at.% of Cr. Sharp changes in the thermal expansivity (Δl/l) at FMI–AFMII and AFMII–FMII transitions are observed, indicating first order transitions. The decrease in relative thermal expansivity at the two transitions with the increase of Cr concentration is related to the decrease in the stability and the temperature-range of the AFMII phase observed in magnetization measurements. A spin reorientation transition (T_SR) has been observed for x=0, at 148 K. It is found that the T_SR increases with the increase of Cr concentration. A magnetic phase diagram as a function of Cr concentration in Sm(Mn_1−xCr_x)₂Ge₂ has been constructed.     

The isoxazolidines: the effects of steric factor and hydrophobic chain length on the corrosion inhibition of mild steel in acidic medium

Several new isoxazolidines having varying degree of steric environment and hydrophobic chain length, prepared efficiently using single-step nitrone cycloaddition reactions, are tested for corrosion inhibition of mild steel in 1 M and 5 M HCl at 50-70 °C range by gravimetric and electrochemical methods. All compounds have shown very good corrosion inhibition efficiency (IE%) in acidic solution. Steric crowding around the nitrogen centres and hydrophobic chain lengths as well as increase in temperature (in the presence of the inhibitor in the higher concentration range 100-400 ppm) are found to increase the inhibition efficiency of the isoxazolidines. Thermodynamic parameters (ΔG°_ads, ΔH°_ads, ΔS°_ads) for the adsorption process and kinetic parameters for the metal dissolution (or hydrogen evolution) reaction in the presence of one of the isoxazolidines were determined. Experimental results agree with the Temkin adsorption isotherm. The inhibition of corrosion in 1 M HCl, influenced by both physi- and chemi-sorption, was found to be under mixed control, but predominantly under cathodic control.     

伊朗铝工业

本文对伊朗铝工业的现状和未来发展规划进行了阐述。伊朗是一个资源非常丰富的国家，有许多发展原铝生产的有利条件。目前伊朗有两座电解铝厂和一座产能为30万t的氧化铝厂，原铝的产量达到了16．75万t。2004年伊朗的原铝产量将达到23万t，2005年将达到50万t。伊朗计划在2009年，使本国的原铝产量达到100万t，氧化铝产量达到220万t，生石油焦产量达到40万t。     

Chemically functionalized carbon nanotubes and their characterization using thermogravimetric analysis, fourier transform infrared, and raman spectroscopy

This article reports key findings on the chemical functionalization of carbon nanotubes (CNT). The functionalization of chemical vapor-deposited CNT was carried out by treating tubes with polyvinyl alcohol through ultrasonication in water with the aid of a surfactant. The surfactant is expected to promote the unbundling of aggregated CNT. The characterization of functionalized samples using thermogravimetric analysis, Fourier transform infrared spectroscopy, and Raman spectroscopy revealed that the CNT were functionalized by the interaction of carboxylic acid and hydroxyl groups. From the characterization studies, it is apparent that there is a strong interaction between these functional groups and the covalently bonded carbon in the CNT network. The functionalization process enabled good CNT dispersion in the solution, and the CNT remained in suspension for many days. To support the effective functionalization of the tubes, the interaction of functionalized CNT with Ni ions is also demonstrated. This paper was presented at the fourth International Surface Engineering Congress and Exposition held August 1–3, 2005 in St. Paul, MN.     

A fuzzy model for predicting burns in surface grinding of steel

Existing analytical thermal models for predicting surface burns due to grinding have limited use because of their reliance on parameters that are not readily obtainable in practice. This paper presents a practical and consistent fuzzy rule-based model for estimating the grinding conditions at which “burn limits” occur. The model consists of 37 absolute and eight relative rules. It has a wide range of applications over many types of steels, Alundum wheels, and grinding conditions. It is also simple to implement, from a rule-chart mode to an intelligent on-line adaptive control mode.     

Abstraction and approximation in fuzzy temporal logics and models

Recently, by defining suitable fuzzy temporal logics, temporal properties of dynamic systems are specified during model checking process, yet a few numbers of fuzzy temporal logics along with capable corresponding models are developed and used in system design phase, moreover in case of having a suitable model, it suffers from the lack of a capable model checking approach. Having to deal with uncertainty in model checking paradigm, this paper introduces a fuzzy Kripke model (FzKripke) and then provides a verification approach using a novel logic called Fuzzy Computation Tree Logic* (FzCTL*). Not only state space explosion is handled using well-known concepts like abstraction and bisimulation, but an approximation method is also devised as a novel technique to deal with this problem. Fuzzy program graph, a generalization of program graph and FzKripke, is also introduced in this paper in consideration of higher level abstraction in model construction. Eventually modeling, and verification of a multi-valued flip-flop is studied in order to demonstrate capabilities of the proposed models.