Design and cost analysis of low head simple reaction hydro turbine for remote area power supply

This paper is aimed at exploring the performance characteristics of a simple reaction hydro turbine for power generation. Using principles of conservation of mass, momentum and energy, the governing equations have been identified for an ideal case of no frictional losses. The paper also describes the conception of a cross-pipe rotor for remote area electricity production. Using the ideal governing equations an optimized geometry of the rotor was selected for the working head of 5 m. Theoretical analysis of the self-governing characteristics has been presented. Experiments were carried out for 2, 3, 4 and 5 m head and evaluated against theoretical results. Split pipe turbine model is presented with detail layout, while different methods of experimentation are explored for different output requirements with varied heads. Various losses in the system are discussed, quantified and included in the graphical format. It is also demonstrated that the experimental power outputs do not have the same tendencies as theoretical predictions and decreases due to jet interference beyond a certain rotational speed as it passes the maximum power point.     

Removal of methylene blue dye from aqueous solutions by a new chitosan/zeolite composite from shrimp waste: Kinetic and equilibrium study

The adsorption of methylene blue dye (MBD) from aqueous solutions was investigated using a new composite made up of shrimp waste chitosan and zeolite as adsorbent. Response surface methodology (RSM) was used to optimize the effects of process variables, such as contact time, pH, adsorbent dose and initial MBD concentration on dye removal. The results showed that optimum conditions for removal of MBD were adsorbent dose of 2.5 g/L and pH of 9.0, and initial MBD concentration of 43.75 mg/L and contact time of 138.65 min. The initial concentration of dye had the greatest influence on MBD adsorption among other variables. The experimental data were well fitted by the pseudo-second order kinetic model, while the Freundlich isotherm model indicated a good ability for describing equilibrium data. According to this isotherm model, maximum adsorption capacity of the composite was 24.5 mg/g. Desorption studies showed that the desorption process is favored at low pH under acidic conditions.     

Design of a dual‐polarized omnidirectional antenna for broadband applications

A broadband dual‐polarized omnidirectional antenna is presented. The proposed antenna consists of two parts, an asymmetric biconical antenna and a cylindrical multilayer polarizer. To have an almost perfect omnidirectional radiation pattern in the horizontal plane and the main radiating beam position at around , in the elevation plane, the asymmetric biconical antenna is used. Moreover, to provide dual polarization performance over the 2–18 GHz operational bandwidth, a multilayer polarizer is designed and optimized. Numerous simulations via Ansoft HFSS and CST microwave Studio CAD tools have been made to optimize the radiation pattern, gain, polarization, and the reflection coefficient of the antenna. Simulation results show that the radiation characteristics of the proposed antenna are extremely sensitive to the configuration and dimensional parameters of the multilayer polarizer. The designed antenna was fabricated with high mechanical accuracy and measured. Satisfactory agreement of computer simulations and experimental results was obtained. The main feature that distinguishes this antenna from the previous designs is the ability to provide the omnidirectional radiation pattern with small ripples, dual polarizations performance, and the wide bandwidth simultaneously. Based on these characteristics, the proposed antenna can be useful for broadband communication applications. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:591–600, 2015.     

Microstructure and mechanical properties of dual phase steels,with different martensite morphology,produced during TLP bonding of a low C-Mn steel

In this research, production of ferrite - martensite dual phase Steels with different martensite morphology was considered during transient liquid phase bonding of a low carbon steel. The steel was bonded using an iron base interlayer with melting point of 1443 K and 40 μm thickness. Bonding process carried out at 1473 K, under pressure of 0.5 MPa, at different holding time of 10, 20, 30 and 40 minutes. Microstructural studies of joint region showed that isothermal solidification completed at the bonding time of 40 minutes. Microstructure of joints made at the bonding time of 10, 20, and 30 minutes consists of two distinct region, athermal and isothermal solidified zones. Microstructure of these zones was studied and chemical composition of these zones was determined by EDS. Joints made with bonding time of 40 minutes were homogenized at 1008 K and then cooled into cold water to produce dual phase ferrite and martensite microstructure with different martensite morphology. According to shear test results, it was found that the shear strength of ferrite - fibrous martensite microstructure is greater than those with ferrite - continuous martensite and ferrite - blocky martensite microstructure.     

Operational characteristics of the miniature loop heat pipe with non-condensable gases

The present paper experimentally investigates the effect of non-condensable gases (NCGs) on the thermal performance of the miniature loop heat pipe (mLHP). Copper mLHP with the flat disk shaped evaporator, 30 mm diameter and 10 mm thick, and fin-and-tube type condenser, 50 mm length and 10 mm height, located at a distance of 150 mm was used in the study. The device which was designed for the thermal control of computer microprocessor was capable of transferring maximum heat load of 70 W while maintaining evaporator temperature below 100 °C limit for electronic equipments. Water was used as the heat transfer fluid inside the mLHP. All the tests were conducted with the evaporator and condenser at the same horizontal level. Simple methods were devised to detect and purge the generated NCG out of the loop heat pipe without disassembling the system. Experiments conducted to classify the trends in the NCG production and storage revealed that majority of the gas is generated in the first few thermal runs and is accumulated in the compensation chamber. Sensitivity tests show that overall effect of the NCG is to elevate the steady-state operating temperature of the loop and increase the start-up time required by the evaporator to achieve stable conditions for the given heat load. As an outcomes of the research work, it can be concluded that mLHPs are more tolerable to the NCGs than conventional heat pipes due to the presence of compensation chamber that can accumulate most of the released gas without major performance degradation.     

Synthesis and Structural Characterization of New Lead(II) Discrete and Infinite Cage-Like Framework: A Precursor to Produce Pure Phase Nano-Sized Lead(II) Oxide

A novel Pb(II) complex, {[Pb₂(tpmba)₂(NO₃)₄]·MeOH} _n (1), was obtained by the reaction of a tripodal ligand, N,N′,N″-tris(pyrid-3-ylmethyl)-1,3,5-benzenetricarboxamide (tpmba), with Pb(NO₃)₂. The structure of complex was determined by X-ray crystallography. The results of structural analysis of the complex reveal that 1 is a M₂L₂ cage-like with a methanol molecule beside the cage. An entirely different structure and topology between 1 and similar complexes indicate that the nature of organic ligands affects the structure of assemblies. The results indicate that the framework of this complex is predominated by the nature of the organic ligand, anions, solvent and geometric need of the metal ions. It was found that the coordination number of Pb^II ions is eight, (PbN₃O₅) has a stereo-chemically active electron lone pair and the coordination sphere is hemi-directed. PbO nanoparticles are obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. Scanning electron microscopy shows that the size of the PbO particles is ~30 nm.     

Green bio-synthesis of Ni/montmorillonite nanocomposite using extract of Allium jesdianum as the nano-catalyst for electrocatalytic oxidation of methanol

In this work, synthesis of Ni nanoparticles was carried out successfully by water extract of Allium jesdianum as a biochemical reducing agent in the presence of montmorillonite clay (MMT) as a natural solid support for the first time. Then the electrochemical activity of the synthesized nanocomposite was investigated in methanol electrocatalytic oxidation. MMT with high cation exchange capacity and nano layer structure was exposed to ion exchange conditions in nickel solution. Then Ni²⁺ ion exchanged form was used in this process as a source of ions and also capping agent. Water extract of Allium jesdianum used as a reducing agent due to abundant availability of phenolic and flavonoid contents. The synthesized Ni/MMT nanocomposite was characterized using UV–Vis spectroscopy (UV–Vis), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDX). The surface of prepared modified electrode has been characterized using SEM to evaluate the morphology, showing uniform dispersion of Ni nanoparticles with mean diameter of 12 to 20 nm. The modified carbon paste electrode was then used in methanol electrocatalytic oxidation reaction. Methanol oxidation on the proposed modified electrode surface occurs at 0.6 V and 0.3 V in alkaline and acidic medium respectively. Also, the results showed the better performance of modified electrode toward methanol electrocatalytic oxidation in comparison with carbon paste electrode that is modified by ion exchanged MMT. Charge transfer coefficients and apparent charge transfer rate constant for the modified electrode in the absence of methanol in alkaline medium were respectively found as: α_a = 0.53, α_c = 0.37 and k_s = 1.6 × 10⁻¹ s⁻¹. Also, the average value of catalytic rate constant for the electrocatalytic oxidation of methanol by the prepared nano-catalyst was estimated to be about 0.9 L·mol^-1·s^-1 by chronoamperometry technique. The prepared electrode was also effective for electrocatalytic oxidation of ethanol and formaldehyde in alkaline medium.     

Development of porous nanocomposite membranes for gas separation by identifying the effective fabrication parameters with Plackett–Burman experimental design

In this research, Plackett–Burman experimental design was used as a screening method to investigate seven processing factors in the preparation of new polyethersulfone based porous nanocomposite membrane. Polymer concentration, nanoparticle type, nanoparticle concentration, solvent type, solution mixing time, evaporation time, and annealing temperature are variables that were evaluated to fabricate mixed matrix membranes using the evaporation phase inversion method for gas separation. According to obtained results, polymer concentration, nanoparticle concentration, solution mixing time, and evaporation time processing factors had significant effects on gas permeation. In addition, the nanoparticle type, nanoparticle concentration, and polymer concentration had substantial effects on membrane selectivity. From analysis of variance, it was found that the model used for membrane gas permeability and membrane selectivity as response values were more reliable within spaced levels. Scanning electron microscope, gas permeation experiments and statistical analysis showed that polymer concentration, nanoparticle type, nanoparticle loading and evaporation time significantly affected the final membrane morphologies and performances. According to this study, trade-off limitation between gas permeability and membrane selectivity could be eliminated by identifying the effective fabrication parameters.     

In situ incorporation of nickel nanoparticles into the mesopores of MCM-41 by manipulation of solvent-solute interaction and its activity toward adsorptive desulfurization of gas oil

In this contribution, different amounts of nickel were incorporated into the mesopores of MCM-41 via an in situ approach. A hydrophobic nickel precursor was incorporated into the nanochannels of mesoporous silica by manipulation of solvent-solute interaction. The synthesized material was characterized using X-ray diffraction, nitrogen physisorption, temperature programmed reduction, and transmission electron microscopy. The results implicate the formation of MCM-41 with well-ordered hexagonal structure and establish also the presence of nickel nanoparticles inside the nanochannels of mesoporous silica. Adsorptive desulfurization of gas oil was conducted using the nickel-incorporated MCM-41 samples. The effects of nickel concentration, temperature of process and feed flow rate on the desulfurization process were examined. The MCM-41 containing 6 wt.% of nickel had both the highest breakthrough sulfur adsorption capacity and total sulfur adsorption capacity, which were 0.69 and 1.67 mg sulfur/g adsorbent, respectively. The breakthrough sulfur adsorption capacity was almost regained after reductive regeneration of spent adsorbent. The obtained results suggest that the method applied for the synthesis of Niy/MCM resulted in formation of well-dispersed, accessible and small nickel nanoparticles incorporated into the pores of MCM-41 which might be an advantage for adsorption of refractory sulfur compounds from low sulfur gas oil.