镀锌测厚仪

本文叙述了Ｘ射线荧光测厚仪的原理、特点及测量头的设计考虑原则。并以我们研制的两种镀锌测得仪为例作了详细说明。     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.     

保温条件下过共晶Al-Si合金半固态浆料的组织演变

研究了保温时间和保温温度对电磁搅拌ZL117合金半固态浆料稳定性的影响.试验结果表明：半固态浆料中初生Si的颗粒直径随着保温时间的延长而逐渐增大,但在前15 min内增长速度比较缓慢,15 min后增长较快;随着保温温度的升高而缓慢增大;初生Si的形状系数随着保温时间的延长而变得越来越大,但也在前15 min内变化较为缓慢,15 min后变大速度突然加快;初生Si的形状系数在620 ℃下保温时最小,在610～620 ℃之间随着保温温度的升高而缓慢变小;在620～650 ℃之间随着保温温度的升高而逐渐增加.     

佛手凉果加工过程中功能性成分与抗氧化性分析

佛手凉果是具有功能特性的岭南特色凉果品种,探究佛手凉果制作过程中功能性成分及其体外抗氧化活性变化规律,可为佛手凉果产业工艺优化与改良提供依据。结果表明,加工提高了佛手中总酸、多糖、黄酮和膳食纤维含量,导致多酚含量下降。制作过程中,1,1－二苯基－2－三硝基苯(DPPH)自由基、2,20 -联氮- 2 -三硝基苯肼(ABTS)自由基清除能力和铁离子还原抗氧化能力(Ferric Reducing Antioxidant Power, FRAP)呈现先下降后上升的趋势,效果分别是新鲜佛手的1.35倍、1.57倍和2.16倍。总黄酮与FRAP之间呈现极显著相关性(P＜0.01);与DPPH、ABTS呈显著相关性(P＜0.05);有机酸、总多糖分别与ABTS和FRAP之间相关性(P＜0.05)。为此,在佛手凉果的制作过程中,糖制和干燥工艺对功能性成分的转化与浓缩起关键作用,可作为工艺优化的重点。     

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Despite the outstanding power conversion efficiency (PCE) of perovskite solar cells (PSCs) achieved over the years, unsatisfactory stability and lead toxicity remain obstacles that limit their competitiveness and large-scale practical deployment. In this study, in situ polymerizing internal encapsulation (IPIE) is developed as a holistic approach to overcome these challenges. The uniform polymer internal package layer constructed by thermally triggered cross-linkable monomers not only solidifies the ionic perovskite crystalline by strong electron-withdrawing/donating chemical sites, but also acts as a water penetration and ion migration barrier to prolong shelf life under harsh environments. The optimized MAPbI₃ and FAPbI₃ devices with IPIE treatment yield impressive efficiencies of 22.29% and 24.12%, respectively, accompanied by remarkably enhanced environmental and mechanical stabilities. In addition, toxic water-soluble lead leakage is minimized by the synergetic effect of the physical encapsulation wall and chemical chelation conferred by the IPIE. Hence, this strategy provides a feasible route for preparing efficient, stable, and eco-friendly PSCs.     

Metal Single-Site Molecular Complex–MXene Heteroelectrocatalysts Interspersed Graphene Nanonetwork for Efficient Dual-Task of Water Splitting and Metal–Air Batteries

Development of multifunctional electrocatalysts with high efficiency and stability is of great interest in recent energy conversion technologies. Herein, a novel heteroelectrocatalyst of molecular iron complex (Fe_MC)-carbide MXene (Mo₂TiC₂T_x) uniformly embedded in a 3D graphene-based hierarchical network (GrH) is rationally designed. The coexistence of Fe_MC and MXene with their unique interactions triggers optimum electronic properties, rich multiple active sites, and favorite free adsorption energy for excellent trifunctional catalytic activities. Meanwhile, the highly porous GrH effectively promotes a multichannel architecture for charge transfer and gas/ion diffusion to improve stability. Therefore, the Fe_MC–MXene/GrH results in superb performances towards oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The practical tests indicate that Zn/Al–air batteries derived from Fe_MC–MXene/GrH cathodic electrodes produce high power densities of 165.6 and 172.7 mW cm⁻², respectively. Impressively, the liquid-state Zn–air battery delivers excellent cycling stability of over 1100 h. In addition, the alkaline water electrolyzer induces a low cell voltage of 1.55 V at 10 mA cm⁻² and 1.86 V at 0.4 A cm⁻² in 30 wt.% KOH at 80 °C, surpassing recent reports. The achievements suggest an exciting multifunctional electrocatalyst for electrochemical energy applications.     

Research and Implementation of Parallel Artificial Fish Swarm Algorithm Based on Ternary Optical Computer

Mobile Networks and Applications - Artificial fish swarm algorithm (AFS) is used in the field of function optimization problems widely. The traditional AFS algorithm has some problems such as long...     

Bioinspired yeast microcapsules loaded with self-assembled nanotherapies for targeted treatment of cardiovascular disease

1. Download high-res image (237KB)
2. Download full-size image