Effect of Compression on the Crystallization Behavior and Corrosion Resistance of Al86Ni9La5 Amorphous Alloy

The effect of compression on the crystallization behavior and corrosion resistance of Al(86)Ni9La5 amorphous ribbons was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning elec-tron microscopy (SEM) and electrochemistry test. The XRD and TEM results reveal that the compressed Al(86)Ni9La5 ribbons spun with the circumferential speed (R) of 29.3 m/s are in fully amorphous state; however, the compressed ribbons spun with R=14.7 m/s have crystalline phases embedded in the amorphous matrix. The SEM images indicate that after compression, the toughness of the ribbons increases. Electrochemical results show that the compression decreases the stability of the passive film of the Al(86)Ni9La5 amorphous ribbons, because of the compression-introduced free volume, shear bands and crystalline phases; meanwhile, with R=14.7 m/s, the compression-induced crystalline phases in the Al(86)Ni9La5 ribbons increase the corrosion potential.     

袖珍型数字式光纤耦合比色仪

为满足现代生产生活中对颜色快速测量的需求,设计了一种基于RGB三基色原理,采用光纤波导及融合技术、应用白平衡调节手段的数字式比色仪。仪器由白光LED光源、Y型混合石英光纤束光波导探头、微透镜发射耦合及透镜准直接收部件、以颜色传感器和MSP430单片机为核心的信号采集及处理部件等组成,采用C语言编程进行数据采集、存储、白平衡调整、颜色识别及显示。经与比色卡对比测试,其测量准确度和速度相对于当前广泛应用的比色卡均有很大提高。     

Early SKIP mode decision for MVC using inter-view correlation

In the joint multiview video model (JMVM) proposed by JVT, the variable block-size motion estimation (ME) and disparity estimation (DE) have been employed to determine the best coding mode for each macroblock (MB). These give a high coding efficiency for multiview video coding (MVC), however, they cause a very high computational complexity in encoding system. This paper proposes to reduce the complexities of the ME and DE processes with an early SKIP mode decision algorithm based on the analysis of prediction mode distribution regarding the corresponding MBs in the neighbor view. In this method, the mode decision procedures of most of MBs can be early terminated, and thus much of computation for ME and DE can be greatly reduced. Simulation results demonstrate that our algorithm can achieve computational saving of 46–57% (depending on the tested sequences) with no significant loss of rate-distortion performance.     

数据库在专家系统中的应用

本文介绍一个将多种数据信息，控制信息引入到数据库中进行管理控制的专家系统，整个系统的运行靠数据库来驱动，系统调整起来非常方便，运行效率得到了提高，结构得到了优化。     

一阶无限抽头响应微波光子滤波器的品质因数分析

随着人们对宽带无线通信带宽需求的不断增加,微波光子学器件的研究成为热点之一,近几年,光学器件的发展非常迅速,基于此的微波光子滤波器的应用和研究也逐步成熟起来.在深入研究微波光子滤波器性能理论的基础上,提出了一阶无限抽头响应的微波光子滤波器(IIRMPF)模型,利用自动控制原理动态结构图的变换知识进行理论推导,得出当反馈...     

General-purpose high-speed integrated lock-in amplifier with 30 dB dynamic reserve at 20 MHz

We present the design of a general-purpose high-speed integrated lock-in amplifier (LIA). The LIA measures the amplitude and phase of the input signal with frequencies from 15 to 20 MHz at SNR as low as ?30 dB. The magnitude measurement circuitry relies on the band-pass filter and current integrator to extract the signal amplitude. The phase measurement circuitry relies on the phase-locked loop to extract the phase difference between the input signal and the reference signal. The designed LIA is fabricated in TSMC 0.18 μm technology. The LIA consumes 37 mW of power. The output signal dynamic range is 300 mV for 600 mV input signal variation, and therefore the output-to-input sensitivity is approximately 0.5 V/V.     

一种新型的左右手传输线超宽带滤波器

超宽带系统需要超宽带滤波器的相对带宽达到110%,并且使用常见的材料设计它,使其结构紧凑、价格便宜。该文将介绍用左右手传输线结构设计的新型超宽带滤波器。另外,利用微带线和共面波导相结合的方式来简化设计、缩小尺寸。其仿真结果证明了利用复合材料可产生负介电常数和负磁导率,滤波器在通带3.8到10.6GHz内的插入损耗小于1.0db。并且其中心频带附近的群时延约为0.20ns,这个群时延足够小,以至于它可以应用到无线通信系统中。     

下一代PON技术的发展

结合FSAN/ITU-T标准组织的权威观点,介绍了下一代PON系统的演进原则和演进路线;着重阐述了当前NG-PON1和NG-PON2的各种热点候选技术。     

IC卡式家用电度表设计

以单片机为核心,设计出IC卡式家用电度表,实现了预收费、报警、显示、断电和防作弊等功能。论文从硬件电路和软件设计两方面进行论述,并提出电度表的网络化管理思路。