Inhibition of Toll-Like Receptor 4 Signaling Mitigates Microvascular Loss but Not Fibrosis in a Model of Ischemic Acute Kidney Injury

The development of chronic kidney disease (CKD) following an episode of acute kidney injury (AKI) is an increasingly recognized clinical problem. Inhibition of toll-like receptor 4 (TLR4) protects renal function in animal models of AKI and has become a viable therapeutic strategy in AKI. However, the impact of TLR4 inhibition on the chronic sequelae of AKI is unknown. Consequently, we examined the chronic effects of TLR4 inhibition in a model of ischemic AKI. Mice with a TLR4-deletion on a C57BL/6 background and wild-type (WT) background control mice (C57BL/6) were subjected to bilateral renal artery clamping for 19 min and reperfusion for up to 6 weeks. Despite the acute protective effect of TLR4 inhibition on renal function (serum creatinine 1.6 ± 0.4 mg/dL TLR4-deletion vs. 2.8 ± 0.3 mg/dL·WT) and rates of tubular apoptosis following ischemic AKI, we found no difference in neutrophil or macrophage infiltration. Furthermore, we observed significant protection from microvascular rarefaction at six weeks following injury with TLR4-deletion, but this did not alter development of fibrosis. In conclusion, we validate the acute protective effect of TLR4 signal inhibition in AKI but demonstrate that this protective effect does not mitigate the sequential fibrogenic response in this model of ischemic AKI.     

Micellar Growth in Cetylpyridinium Chloride/Alcohol System: Role of Long Chain Alcohol,Electrolyte and Surfactant Head Group

The microstructural transition of aqueous 0.1 M cetylpyridinium chloride (CPC) in the combined presence of salt KBr and long chain alcohol (C₉OH-C₁₂OH) has been studied as a function of alcohol concentration, electrolyte concentration and temperature. The viscosity of the CPC/KBr micellar system showed a peaked behavior with alcohol concentration (C ₀), due to alcohol induced structural transition, which was confirmed by dynamic light scattering (DLS) and rheological analysis. Besides C ₀, the chain length of alcohol (n) was found to show a remarkable effect on the micellization behavior of CPC/KBr system. It was observed that the ability of alcohol to induce micelle growth diminishes with n, which was well supported by viscosity, rheology and DLS measurements. To examine the effect of the electrolyte on the micellar growth, the salt concentration was varied from 0.05 to 0.15 M and it was observed that with increase in [KBr], the peak position shifts towards lower C ₀. The effect of temperature on the micellar system showed interesting phase behavior for CPC/KBr/Decanol. The system exhibited a closed solubility loop with an upper critical solution temperature (UCST) > the lower critical solution temperature (LCST), reminiscence of nicotine-water system. The role of surfactant head group on the structural evolution was revealed by comparing the present results with our previous report for similar micellar system, CTAB/KBr/long chain alcohol.     

Tuning of Cloud Point by the Nature of Surfactant Headgroup: Influence of Counterion and Additives

Work was performed to distinguish the role of sulfonate (–SO₃ ^?) and sulfate (–OSO₃ ^?) with respect to the micellization and clouding phenomenon in ionic surfactant solutions. The clouding phenomenon is a recent addition to the conventional one observed with nonionic surfactants. Three ionic surfactants [sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), and sodium dodecylsulfonate (SDSo)] are chosen and the effects of added tetra-n-pentylammonium bromide (TPeAB) and benzyl tributylammonium bromide (BTAC) have been studied on micellization and clouding behaviors in aqueous solution. Based on critical micelle concentration (CMC) and cloud point (CP) measurements, the following order has been observed: SDBS < SDS < SDSo. Though both SDBS and SDSo contain sulfonate groups, they are found at the two ends of the ordering. Therefore, the role of the phenyl ring is also having importance in clouding phenomena. For a typical surfactant, TPeAB was found to be more effective than BTAC. Based on the CP studies, two compositions of SDSo + TPeAB/BTAC were chosen and the effects of different additives (carbohydrate, amino acid, and l-ascorbic acid) on the CP were investigated. Additive may either decrease or increase CP, depending on the structure of the counterion or additive. The present work shows a few novelties: (1) headgroup/counterion dependence of CP and (2) hydrophobicity of counterion/surfactant has an important bearing on the phenomenon. The data can be utilised in improving cloud point extraction methodologies (CPEMs).     

Corrosion of Alloy Haynes 230 in High Temperature Supercritical Carbon Dioxide with Oxygen Impurity Additions

The corrosion of Ni-based alloy Haynes 230 in supercritical carbon dioxide at temperatures of 650 and 750 °C at a pressure of 20 MPa was investigated. In high-purity research grade CO₂, the corrosion performance of the alloy was excellent with a thin, uniform, protective chromium-rich oxide layer forming on the surface. Introduction of 10 and 100 ppm O₂ impurity in the CO₂ environment noticeably enhanced oxidation with evidence of oxide spallation and nodule formation. In these oxygen impurity added tests, increased oxidation led to subsurface voids due to the more rapid outward diffusion of chromium as well as intergranular alumina and chromia. The oxygen concentration at the inlet and the outlet of the autoclave was measured and used to support the results of characterization of the surface oxide to develop a more holistic understanding of the role of oxygen impurity on the corrosion process. In all cases, there some carbon was observed, which manifested as slightly higher concentration of chromium–carbide phase at the grain boundaries compared to the unexposed alloy.     

Non-uniform Euler-Bernoulli beams under a single moving oscillator: An approximate analytical solution in time domain

Dynamic responses of simply supported non-uniform beams traversed by a moving oscillator are analysed in this paper. An approximate analytical method based on Rayleigh-Ritz (R-R) formulation is developed. The fundamental approximate mode obtained from R-R method is used in the present formulation to determine the responses of the beam and the oscillator. Effects of surface irregularities on the displacement and acceleration responses of the beam and the vehicle are also analysed. The results are compared with those obtained using Finite element method (FEM). A numerical example is provided to illustrate the validity of the present method which shows that the proposed method is simple, computationally more efficient compared to FEM and gives fairly good results. Though the single-mode approach used in the present paper is a classical one and numerous studies on the responses of uniform beams under moving loads have been reported in the past, its application to non-uniform beams (for which there does not exist any closed form expression for mode shapes) under a moving load, especially a moving oscillator, is presented for the first time.     

Variable-diameter deep mixing column for multi-layered soft ground improvement: Laboratory modeling and field application

Deep mixing columns are commonly employed for soft ground improvement. However, the diameter of a single conventional column is a constant and the area replacement ratio does not vary with depth. Hence, the conventional column is not the ideal solution for multi-layered soft grounds, where different layers have remarkably different soil properties. Accordingly, this study proposes a better solution, which is the variable-diameter deep mixing column with a large diameter in the soil layer having high compressibility and a small diameter in the soil layer having relatively low compressibility. In this study, small-scale laboratory model tests were firstly employed to compare the performance of two-layered soft grounds improved by a variable-diameter column and a conventional column. The additional vertical stress in the soil and the column, the excess pore water pressure, and the ground settlement were analyzed. Then, a field application of variable-diameter columns for multi-layered soft ground improvement was presented; the design considerations, column installation, and monitored settlement were introduced and analyzed. The results indicated that the additional stress in the soil and the column in the highly compressible soil layer were much lower in the variable-diameter column-improved ground than in the conventional column-improved ground. Consequently, the variable-diameter column-improved ground yielded less total settlement and less post-construction settlement compared to the conventional column-improved ground.     

Water generation from atmospheric air by using different composite desiccant materials

In this communication, new composite desiccant materials having 37% concentration of CaCl₂ have been compared for water production from atmospheric air. The vermiculite–saw wood, jute and burnt-clay have been used as host materials and CaCl₂ as a hygroscopic salt. All the desiccant materials have been tested with the solar glass desiccant box type system (SGDBS) with a collector area of 0.36?m². Design parameters for water production are: height of the glass from the desiccant bed to be 0.22?m, an inclination angle of 30°, the effective thickness of the glass as 3?mm and the number of glazing is single. It has been found that on the experimental day, the maximum amount of fresh water generated by the vermiculite–saw wood/CaCl₂ is 130?ml/kg/day.     

Experimental analysis of the effects of cerium oxide nanoparticles on a single-cylinder diesel engine using biofuel blended with diesel as fuel

Energy demand is the hot topic of all developing and developed countries. Energy demand has been increasing day by day at a high rate. So, it is necessary to find an alternative solution that is eco-friendly. Biodiesel can be the alternative solution for this problem. The main purpose of this paper is to test the engine performance and emission parameters of a diesel engine using pure cinnamon oil blended with diesel and using cerium oxide as a catalyst. The parameters measured are brake power, brake thermal efficiency, specific fuel conception, CO₂, CO, NO_x and HC.     

Enhanced visible green and 1.5 μm radiative emission of Er~(3+) ions in Li_2O-PbO-Al_2O_3-B_2O_3 glasses for photonic applications

A series of Er~(3+) ions doped lithium lead alumino borate(LiPbAlB) glasses were synthesized via melt quench method and their structural,physical and optical properties were studied.Judd-Ofelt theory in correlation with the emission and absorption profiles was performed for the measurement of various radiative parameters for different transitions of Er~(3+) doped glasses.The as-prepared glasses show deep green(550 nm) as well as NIR(1532 nm) emission at 380 and 980 nm excitation wavelengths,respectively.The intensity of emission spectra increases with Er~(3+) ions concentration up to 1.5 mol% and beyond quenching is observed.The Dexter theory applied to the emission profiles reveals the interaction between Er~(3+)ions as dipole-dipole in nature.CIE color coordinates are found to fall in the green region of the visible spectrum.It is observed that 1.5 mol% of Er~(3+) ions concentration is optimum to exhibit the maximum quantum efficiency,branching ratios,gain bandwidth,emission cross-section,gain crosssection and aptly suitable for visible and NIR photonic applications.