Synthesis of Ceria–Zirconia Nanocrystals with Improved Microstructural Homogeneity and Oxygen Storage Capacity by Hydrolytic Sol–Gel Process in Coordinating Environment

Ceria–zirconia solid solution nanocrystals, (1‐x)CeO₂–xZrO₂, 0 ≤ x ≤ 1, are prepared by sol–gel processing in dodecylamine of solutions obtained by forced hydrolysis of inorganic salts. The as‐prepared nanoparticles have a ceria cubic structure, up to x = 0.35, or are amorphous. Heat‐treatment is carried out at temperatures ranging from 500 to 800 °C, the latter temperature begin suitable to obtain solid solutions throughout the composition range. For all the heating temperatures and x values, the fluorite cubic structure of pure CeO₂ transforms to a mixture (c′) of the cubic c and tetragonal t″ phases for x = 0.35, and to tetragonal t phase only for x = 0.8 at 650 °C, x = 0.65 at 800 °C, and, to a very limited extent, x = 0.5 at 1000 °C. No evidence is obtained at low x values of the t phase, which is detrimental to the oxygen storage capacity. Prolonged heating at 1000 °C demonstrates that only for x = 0.65 a limited separation of CeO₂‐rich nanocrystals occurs. The samples undergo the same transition without simultaneous occurrence of different phases, apart for the two mentioned limited cases. This result is attributed to the intimate mixing of the metal cations even in the early stages of processing. In as‐prepared samples the Zr distribution becomes inhomogeneous when going from x = 0.2 to x = 0.35, but no early phase separations appear. The oxygen storage capacity is favorably influenced by the persistence of the cubic c′ phase.     

Conductivity of SU‐8 Thin Films through Atomic Force Microscopy Nano‐Patterning

Processing flexibility and good mechanical properties are the two major reasons for SU‐8 extensive applicability in the micro‐fabrication of devices. In order to expand its usability down to the nanoscale, conductivity of ultra‐thin SU‐8 layers as well as its patterning by AFM are explored. By performing local electrical measurements outstanding insulating properties and a dielectric strength 100 times larger than that of SiO₂ are shown. It is also demonstrated that the resist can be nano‐patterned using AFM, obtaining minimum dimensions below 40nm and that it can be combined with parallel lithographic methods like UV‐lithography. The concurrence of excellent insulating properties and nanometer‐scale patternability enables a valuable new approach for the fabrication of nanodevices. As a proof of principle, nano‐electrode arrays for electrochemical measurements which show radial diffusion and no overlap between different diffusion layers are fabricated. This indicates the potential of the developed technique for the nanofabrication of devices.     

New insights into the heating mechanisms and self-regulating abilities of manganite perovskite nanoparticles suitable for magnetic fluid hyperthermia

The heating and self-regulating abilities of La(1-x)Sr(x)MnO(3+Δ) ferromagnetic nanoparticles for magnetic fluid hyperthermia are studied. The samples, synthesized by the Glycine Nitrate Process, present non-agglomerated particles but are partially constituted by polycrystalline nanoparticles, displaying average crystallite diameters ranging from 21 to 31 nm. The strontium content of these nanoparticles, between 0.14 and 0.39, is associated with non-stoichiometry effects in the materials, and both govern their Curie temperatures (T(C)), which range between 13 and 86 °C, respectively. Heating experiments carried out on samples suspended in an aqueous agarose gel and with different alternating magnetic fields derive unexpected maximum temperatures that cannot be explained on the basis of static magnetization data. The measurement of the thermal dependence of the specific absorption rate (SAR) of nanopowders by adiabatic magnetothermia reveals the existence of a dissipation peak just below T(C), which is assigned to a Hopkinson peak. This thermal dependence of SAR, together with a simple thermal model that considers a linear approximation for the heat power losses, is crucial to clarify the behavior observed in heating experiments and also to discuss the possibilities of the samples as self-regulating hyperthermia mediators. This analysis emphasizes that, for the correct design of a self-regulating system, the heat power losses determined by the surrounding conditions must be taken into account as well as the heating capacity of the magnetic nanoparticles.     

A medicinal-chemistry-guided approach to selective and druglike sigma 1 ligands

Based on a medicinal-chemistry-guided approach, three novel series of druglike cycloalkyl-annelated pyrazoles were synthesized and display high affinity (pKi>8) for the sigma1 receptor. Structure-affinity relationships were established, and the different scaffolds were optimized with respect to sigma1 binding and selectivity versus the sigma2 receptor and the hERG channel, resulting in selective compounds that have Ki values (for sigma1) in the subnanomolar range. Selected compounds were screened for cytochrome P450 inhibition (CYP1A2, CYP2A6, CYP2B6, CYP2C8, CYP2C9, CYP2C19, CYP2D6, CYP2E1, CYP3A4), metabolic stability (rat and human liver microsomes), and cell-membrane permeability (Caco-2). They showed favorable in vitro ADME properties as well as favorable calculated druglike and experimental physicochemical properties. Furthermore, compounds 7 f and 17 a, for example, displayed high selectivity (affinity) for the sigma1 receptor against a wide range of other receptors (>60). With these valuable tool compounds in hand, we are further exploring the role of the sigma1 receptor in relevant animal models corresponding to such medicinal indications as drug abuse, pain, depression, anxiety, and psychosis.     

Diffusional surface voltammetry as a probe of adsorption energetics

Direct determination of the adsorption free energy for extremely low surface coverages (Henry limit) requires the use of a technique that must be highly sensitive to both the amount and the energetics of adsorbed molecules. Herein, we demonstrate that diffusional surface voltammetry (DSV), which embodies film and stripping voltammetries as two limiting cases, can be used to achieve this goal for electroactive adsorbates. To this end, a general analytical expression for the surface voltammetric peak potential of DSV is derived, which covers the full range of scan rates, bulk concentrations, and adsorptivity of the freely diffusing form of the redox couple, so that the surface redox conversion can be either equilibrated with or transport-isolated from the solution bulk. Strategies to get a quantitative insight into the energetics of electrosorption are outlined, and diagnostic criteria for their application are developed. In particular, it is demonstrated that DSV can be used in its stripping mode to determine group contributions to the adsorption free energy, avoiding possible interferences from intermolecular interactions or formation of oligomeric species. Application of this protocol to the reductive desorption of distinct homologous series of alkylthiolates adsorbed at mercury electrodes has allowed us to determine the contributions of the CH(n) groups (n = 0-3) to the free energy of adsorption of these molecules. These estimates are shown to correlate linearly with the corresponding group contributions to the octanol-water partition coefficient, revealing that adsorption of individual hydrocarbon groups at the mercury/solution interface scales with their hydrophobicity. Overall, the present work enlarges the capability of surface voltammetry to probe adsorption energetics down to the micromolar level, and it represents a first step toward the development of a unified treatment of stripping and film voltammetries.     

In Vitro and In Vivo Interrogation of Bio-sprayed Cells

Bio-sprays can directly form pre-organized cell-bearing structures for applications ranging from engineering functional tissues to the forming of cultures, most useful for modeling disease, to the discovery and development of drugs. Bio-electrosprays and aerodynamically assisted bio-jets, are leading approaches that have been demonstrated as having far-reaching ramifications for regenerative biology and medicine.     

建筑自述

从巴黎戴高乐机场开始，３０年来，安德鲁不仅设计出一大批优秀的建筑作品，同时，他的设计思想也日趋清晰，本文记述的就是这位建筑师的一些思想火花，它既是对过去的总结，同时又指导着建筑师今后的创作。     

Geographical information systems for map based navigation in urban environments

In order to solve most of the existing mobile robotics applications, the robot needs some information about its spatial environment encoded in what it has been commonly called a map. The knowledge contained in such a map, whatever approach is used to obtain it, will mainly be used by the robot to gain the ability to navigate in a given environment. We are describing in this paper, a method that allows a robot or team of robots to navigate in large urban areas for which an existing map in a standard human understandable fashion is available. As detailed maps of most urban areas already exist, it will be assumed that a map of the zone where the robot is supposed to work is given, which has not been constructed using the robot’s own sensors. We propose in this paper, the use of an existing Geographical Information System based map of an urban zone so that a robot or a team of robots can connect to this map and use it for navigation purposes. Details of the implemented system architecture as well as a position tracking experiment in a real outdoor environment, a University Campus, are provided.     

Osteoporosis screening: from clinical history to physical examination before complementary examinations

An initial survey of the construction needs of the health care industry was conducted in 1989, and this paper reports on the results of the follow-up study that was completed in late 1996. In the 1996 study, questionnaires were sent to 2,600 large hospitals, both public and private, throughout the United States. Information was compiled on new construction, renovation, and maintenance expenditures. Analyses of expenditures, contracting methods, and forms of solicitation are presented. Respondents were also asked to identify their top construction-related problem and to list future trends impacting health care facilities over the next 5–10 years. The findings conclude that sweeping changes in managed health care have caused a major shift away from new construction and toward renovation of existing facilities to meet the state-of-the-art outpatient services demanded by health care customers.