Chromium-Based Metal–Organic Framework as A-Site Cation in CsPbI2Br Perovskite Solar Cells

Inorganic CsPbI_xBr_3−x perovskite solar cells (PSCs) have gained enormous interest due to their excellent thermal stabilities. However, their intrinsically poor moisture stability hampers their further development. Herein, a chromium-based metal–organic framework group is intercalated inside the inorganic Pb I framework, resulting in a new multiple-dimensional electronically coupled CsPbI₂Br perovskite. In this structurally and electronically coupled perovskite, the π-conjugated terpyridyl can delocalize the excited valence electrons of metal Cr³⁺ ion, enabling multi-interactive charge-carrier transport channels within CsPbI₂Br perovskites. The stability and efficiency of the produced devices are substantially enhanced in comparison to their counterparts with only a pristine CsPbI₂Br active layer. The optimized all-inorganic PSC yields a power conversion efficiency (PCE) as high as 17.02%. Remarkably, the stabilized device retains 80% of its PCE after 1000 h in the ambient atmosphere. This study provides a new paradigm toward addressing the stability challenge of the inorganic perovskite while enhancing its carrier transport ability.     

Addition of a reactive diluent to a catalyzed epoxy-anhydride system. I. Influence on the cure kinetics

The effect of a reactive diluent (RD) on the kinetics of the curing of an epoxy resin, based on diglycidyl ether of bisphenol A (DGEBA), with a carboxylic anhvdride derived from methyl-tetrahydrophthalic anhydride (MTHPA) catalyzed by a tertiary amine has been studied. The reactive diluent was a low-viscosity aliphatic diglycidyl ether, and the compositions per 100 parts by weight (pbw) of DGEBA were 10, 30, and 50 pbw of RD with the stoichiometric quantity of MTHPA and 1 pbw of catalyst. The curing kinetics was monitored by differential scanning calorimetry (DSC), and the kinetic parameters were determined from the nonisothermal DSC curves by the method described by Málek. The kinetic analysis suggests that the two-parameter autocatalytic model is the more appropriate to describe the kinetics of the curing reaction of this epoxy-anhydride system. The kinetic parameters thus derived satisfactorily simulate both the nonisothermal DSC curves and the isothermal conversion-time plots. Increasing the RD content leads to a small increase in both the nonisothermal and the isothermal heats of curing and has a slight effect on the kinetic parameters E, ln A, m, and n, and, consequently, on the overall reactivity of the system. On the other hand, the increase of the RD content significantly affects the structure of the crosslinked epoxy. It is confirmed that the introduction of aliphatic chains in the structure of the epoxy increases the mobility of the segmental chains in the glass transition region. The consequence of this chemical modification is a decrease of the glass transition temperature, T_g. © 1996 John Wiley & Sons, Inc.     

Dual photonic-electrochemical lab on a chip for online simultaneous absorbance and amperometric measurements

A dual lab on a chip (DLOC) approach that enables simultaneous optical and electrochemical detection working in a continuous flow regime is presented. Both detection modes are integrated for the first time into a single detection volume and operate simultaneously with no evidence of cross-talk. The electrochemical cell was characterized amperometrically by measuring the current in ferrocyanide solutions at +0.4 V vs gold pseudoreference electrode, at a flow rate of 200 μL min(-1). The experimental results for ferrocyanide concentrations ranging from 0.005 to 2 mM were in good agreement with the values predicted by the Levich equation for a microelectrode inside a rectangular channel, with a sensitivity of 2.059 ± 0.004 μA mM(-1) and a limit of detection (LoD) of (2.303 ± 0.004) × 10(-3) mM. Besides, optical detection was evaluated by measuring the absorbance of ferricyanide solutions at 420 nm. The results obtained therein coincide with those predicted by the Beer-Lambert law for a range of ferricyanide concentrations from 0.005 to 0.3 mM and showed an estimated LoD of (0.553 ± 0.001) × 10(-3) mM. The DLOC was finally applied to the analysis of L-lactate via a bienzymatic reaction involving lactate oxidase (LOX) and horseradish peroxidase (HRP). Here, the consumption of the reagent of the reaction (ferrocyanide) was continuously monitored by amperometry whereas the product of the reaction (ferricyanide) was recorded by absorbance. The DLOC presented good performance in terms of sensitivity and limit of detection, comparable to other fluidic systems found in the literature. Additionally, the ability to simultaneously quantify enzymatic reagent consumption and product generation confers the DLOC a self-verifying capability which in turn enhances its robustness and reliability.     

FPGA solution for matrix converter double sided space vector modulation algorithm

Matrix Converters (MCs) present several advantages, but yet several barriers must be overcome, such as MC modulation and control technique complexity. This article proposes a multiplatform environment that allows the implementation of the Double Sided Space Vector Modulation (DS-SVM) algorithm in a last-generation Field Programmable Gate Array (FPGA) device. The traditional digital control architecture, based on a SP and some additional devices, is improved by means of a last generation FPGA where the main processor (PowerPC), internal memory, communication interfaces, I/O capabilities and a hardware core that executes the DS-SVM have been connected using on-chip buses. The methodology begins by defining the DS-SVM in a Matlab-Simulink environment. The PowerPC delivers 680 MIPS, but it is not a good candidate to execute the DS-SVM algorithm because it is not possible to achieve the modulation frequency that is necessary for an MC. A new configurable hardware circuit that implements the whole DS-SVM algorithm is proposed. This solution achieves modulation frequencies over 100 kHz. This hardware core is connected to one of the PowerPC buses and the processor can configure it or get feedback information at any time. As the processor is liberated from the very time-consuming DS-SVM computation, it can execute many higher level tasks.     

The Role of Extracellular Vesicles in Demyelination of the Central Nervous System

It is being increasingly demonstrated that extracellular vesicles (EVs) are deeply involved in the physiology of the central nervous system (CNS). Processes such as synaptic activity, neuron-glia communication, myelination and immune response are modulated by EVs. Likewise, these vesicles may participate in many pathological processes, both as triggers of disease or, on the contrary, as mechanisms of repair. EVs play relevant roles in neurodegenerative disorders such as Alzheimer’s or Parkinson’s diseases, in viral infections of the CNS and in demyelinating pathologies such as multiple sclerosis (MS). This review describes the involvement of these membrane vesicles in major demyelinating diseases, including MS, neuromyelitis optica, progressive multifocal leukoencephalopathy and demyelination associated to herpesviruses.     

Comparison of percent free prostate specific antigen and prostate specific antigen density as methods to enhance prostate specific antigen specificity in early prostate cancer detection in men with normal rectal examination and prostate specific antigen between 4.1 and 10 ng./ml

PURPOSE: We analyzed the behavior of prostate specific antigen (PSA) density and percent free PSA to enhance the specificity of PSA in the early diagnosis of prostate cancer in men with normal digital rectal examination and PSA serum level between 4.1 and 10 ng./ml. MATERIALS AND METHODS: PSA serum level, PSA density and percent free PSA were analyzed in 74 men with normal digital rectal examination and PSA serum level between 4.1 and 10 ng./ml. All men underwent systematic prostate biopsy, and the diagnosis was benign prostate hyperplasia in 52 and prostate cancer in 22. Furthermore, we determined the decrease in unnecessary biopsies and the cancer detection rate using 0.10 versus 0.15 as cut points for PSA density, and 20 versus 25 as cut points for percent free PSA. RESULTS: In patients with benign prostatic hyperplasia and prostate cancer, respectively, the median PSA level was 6.7 and 7.0 ng./ml. (p > 0.05), median prostate volume was 50 and 37 cc (p < 0.04), median PSA density was 0.14 and 0.19 (p < 0.007) and median percent free PSA was 18.9 and 10.1 (p < 0.005). Using PSA density cut points of 0.15 and 0.10, the decrease in negative biopsies was 53.8 and 36.5% with a sensitivity of 86.4 and 90.9%, respectively. However, using percent free PSA cut points of 20 and 25, the decrease in negative biopsies was 36.5 and 26.9% with a sensitivity of 77.3 and 95.5%, respectively. CONCLUSIONS: Although both methods could minimize unnecessary biopsies in men with normal digital rectal examination and PSA serum level between 4.1 and 10 ng./ml., the percent free PSA was more cost-effective since transrectal ultrasound was not required. In this small series of symptomatic patients a percent free PSA cut point of 25 could detect at least 95% of prostate cancers and decrease 26.9% of negative biopsies.     

Efficacy of captopril on posttransplant erythrocytosis. Long-term follow-up

The presence of both nitrobenzylthioinosine-sensitive and nitrobenzylthioinosine-insensitive dipyridamole binding sites in postmortem human ependymal tissue is reported. Displacement studies using 15 nM [3H]dipyridamole revealed 50-60% of the sites were sensitive to nitrobenzylthioinosine. Non-linear analysis of binding isotherms to estimate the density of nitrobenzylthioinosine-sensitive and -insensitive sites revealed a maximum number of nitrobenzylthioinosine-sensitive binding sites (Bmax) of 395 +/- 19 fmol/mg protein and a nitrobenzylthioinosine-insensitive Bmax of 3910 +/- 700 fmol/mg protein (corresponding Kd values of 0.1 nM and 114 nM respectively). Thus there are approximately 10 times as many nitrobenzylthioinosine-insensitive sites as nitrobenzylthioinosine-sensitive [3H]dipyridamole binding sites in human ependymal membranes.     

Fuzzy Petri net-based programmable logic controller

Programmable logic controllers (PLCs) are able to directly implement control sequences specified by means of standard languages such as Grafcet or formal models such as Petri nets. In the case of simple regulation problems between two steps it could be of great interest to introduce a notion of “fuzzy events” in order to denote a continuous evolution from one state to another. This could result from a linear interpolation between the commands attached to two control steps represented by two Petri net (PN) places. This paper is an attempt to develop fuzzy PN-based PLCs in a similar way as fuzzy controllers (regulators). Our approach is based on a combination of Petri nets with possibility theory (Petri nets with fuzzy markings)