An Instant,Green, Microwave Irradiated Process for the Preparation of Advanced,Hybrid, Nanoflower of Thorium Oxide and Thorium Oxalate Hydrate Useful for Broad Application Spectrum

Protection of Metals and Physical Chemistry of Surfaces - We report a facile and reproducible method to synthesize advanced, homogenized, hybrid, nanoflower of thorium oxide and thorium oxalate...     

Comparative evaluation of extraction of tetra- and hexa-valent neptunium ions by CMPO in a room temperature ionic liquid

ABSTRACT

Solvent extraction studies were performed to understand the extraction behavior of Np⁴⁺ and NpO₂ ²⁺ from acidic feeds with CMPO (octyl (phenyl)-N,N-diisobutyl carbamoyl methyl phosphine oxide) dissolved in 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide, a water immiscible ionic liquid. Slope analyses on the distribution data revealed the extraction of ML₂ type species, where M = Np⁴⁺ or NpO₂ ²⁺, and L = CMPO. Studies were also carried out with Pu⁴⁺ and UO₂ ²⁺ under identical conditions. The nature of the extracted species was found to vary with the nature of the ionic species.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Sensitivity Optimization of MEMS Based Piezoresistive Pressure Sensor for Harsh Environment

Silicon - Silicon carbide piezoresistive pressure sensor is more suitable for harsh environment due to its wide bandgap, corrosion tolerance, excellent chemical inertness, high Young’s...     

Design and precision construction of novel magnetic-levitation-based multi-axis nanoscale positioning systems

This paper presents two novel six-axis magnetic-levitation (maglev) stages capable of nanoscale positioning. These stages have very simple and compact structures, which is advantageous to meet the demanding positioning requirements of next-generation nanomanipulation and nanomanufacturing. Six-axis motion generation is accomplished by the minimum number of actuators and sensors. The first-generation maglev stage, namely the Δ-stage, is capable of generating translation of 300 μm and demonstrates position resolution better than 2 nm root-mean-square (rms). The second-generation maglev stage, namely the Y-stage, is capable of positioning at a resolution better than 3 nm rms over a planar travel range of 5 mm × 5 mm. A novel actuation scheme was developed for the compact structure of this stage that enables six-axis force generation with just three permanent-magnet pieces. This paper focuses on the design and precision construction of the actuator units, the moving platens, and the stationary base plates. The performance of the two precision positioners is compared in terms of their positioning and load-carrying capabilities and ease of manufacture. Control system design for the two positioners is discussed and an experimental plant transfer function model is presented for the Y-stage. The superiority of the developed instruments is also demonstrated over other prevailing precision positioning systems in terms of the travel range, resolution, and dynamic range. The potential applications of the maglev positioners include semiconductor manufacturing, microfabrication and assembly, nanoscale profiling, and nanoindentation.     

Carbon dioxide emission and its regulation at land–water interface downstream of a point source at Ganga River (India)

The streams and rivers are considered hotspots of CO₂ exchange; and representative direct CO₂ emission measurements are essential for a correct regional estimate. We measured CO₂ emission flux at 15 sites at land–water interface downstream of a point source during low flow for three consecutive months for the year 2017. The general range of CO₂ efflux observed here was close to the results of regional studies, although values near the point source were disproportionately high (>350 mg/m²/h). CO₂ emission flux showed strong dependence on total organic carbon (TOC; R² = 0.96; P < 0.001), (R² = 0.88; P < 0.001), soluble reactive‐P (SRP; R² = 0.91; P < 0.001) and microbial activity measured in terms of fluorescein diacetate activity (FDAase; R² = 0.92; P < 0.001) and substrate induced respiration (SIR; R² = 0.96; P < 0.001). Because point source‐associated interfaces provide heterogeneous habitats, our study suggests the need for large scale monitoring of CO₂ emission at land–water interface of major rivers for more correctly presenting the regional scale CO₂ budget.     

Studien zur Biochemie holzzerstörender Pilze—Dritte Mitteilung: Cellulase und Invertase von Polystictus sanguineus und über die mögliche Wirkungsmechanik von Holzschutzmitteln

European Journal of Wood and Wood Products - Im vorigen Teilbericht wurden Untersuchungen über Amylase von zwei Pilzen beschrieben. Der vorliegende Bericht befaßt sich mit Cellulase und...     

Enhancement of room temperature ferromagnetism in Cd1−xNixSe nanoparticles

Cd_1?xNi_xSe (x = 0.0, 0.02, 0.05 and 0.1) nanoparticles have been synthesized by chemical route. X-ray diffraction analysis shows crystalline nature of synthesized nanoparticles possessing wurtzite phase having hexagonal structure. Transmission electron microscopy depicts spherical morphology and uniform particle size distribution of pure and Ni-doped CdSe nanoparticles. The blue-shift in band gap has been observed with Ni-doping concentration. Photoluminescence study shows the presence of intrinsic defects (V_Cd–V_Se) in the synthesized nanoparticles. Electron spin resonance (ESR) analysis reveals the long range ferromagnetic ordering in pure and doped nanoparticles. ESR study also indicates that Ni ions exist in +2 oxidation state in host nanoparticles. The magnetic hysteresis (M-H) loops display ferromagnetism at room temperature in pure and Ni-doped CdSe nanoparticles. The increase of ferromagnetic behavior has been observed with Ni-doping concentration. M-H analyses indicate that defects and carrier mediated exchange interactions are responsible for ferromagnetic ordering, in the present study.