PIK-2 Reactor with a Low Consumption of High-Enrichment Uranium

Calculations of the possibility of switching the matrix of the fuel-element cores and the vessel with the reactor envelope to weakly neutron-absorbing aluminum and lowering at the same time the fuel content in the fuel elements by 40% are performed for the high-flux PIK reactor which is under construction in Gatchina. As a result, the flux density of the thermal neutrons in the heavy-water reflector increases by a factor of 1.4–1.5 and the maximum unperturbed flux reaches a world record value – 1.9·10¹⁵ sec^–1·cm^–2. The nonuniformity of the volume energy-release decreases to 2.3. The weight of the control rods and reactor safety increase. As a result of the decrease of the fuel content in the fuel elements and the increase of the run duration, about 60 kg of high-enrichment uranium ²³⁵U are saved annually, decreasing annual fuel costs by one third.     

The Influence of the Silicone Carbide Content and Type on the Microstructure and the Flaw Level of Silica Ceramics

Comprehensive studies of the flaw level and some structural characteristics of a composite ceramic material based on Karakeche clay (Kyrgyzstan) are carried out for a range of thermoactivation regimes and impurity contents of silicone carbides of various types.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.     

Upgrade of Proportioning Colorant and Decolorizing Agents for Glass Batch

Different designs of proportioners and screw feeders for colorant and decolorizing agents for glass melt are discussed.__________Translated from Steklo i Keramika, No. 4, pp. 8 – 9, April, 2005.     

A Customized Radiation Sensor for Ionization Collection

The measurement of absorbed doses is fundamental to radiation biology and oncology. A customized parallel plate radiation sensor was designed and fabricated as a precursor to investigating novel materials, such as carbon nanotubes, as a substitute for conventional metallic conducting plates or active volume medium. This sensor contains two thick and large-area electrodes that provide the sensor with a good signal-to-noise ratio. The 6 MV and 15 MV photon beams produced by a Varian Clinac 21 EX medical linear accelerator were used in the experiments. The linear accelerator was calibrated such that 1 monitor unit (MU) produces 1 cGy of dose in water with depth of 5 cm for a calibration geometry of source-to-axis distance equal to 100 cm and 10times10 cm² field size at the point of measurement. Ionization measurements were performed by varying the bias voltages, electrode separations, exposures, and angles of the incident beam to characterize the sensor. Signal saturation characteristics of the sensor with different electrode separations and exposures were investigated. This sensor displayed excellent linear response to exposure up to 600 MU. An analytical modeling using the pencil beam model and simulations based on device configuration were given to explain the results. In oblique incident beam experiments, the prototype sensor showed an accurate response compared to simulation results for a small field size of 1times1 cm². The sensor was tested to be suitable in the study of ionization collection efficiencies for different materials     

Matrix mediated alignment of single wall carbon nanotubes in polymer composite films

Alignment of single wall carbon nanotubes (SWNT) in liquid crystalline (LC) polymer matrix imparting orientation to the nanotubes along the nematic director was studied by atomic force microscopy, measurements of electrical conductivity and Raman spectroscopy of the composite in the directions parallel and perpendicular to the nematic director. The composites were prepared through dispersion of SWNT with LC monomer in a common solvent, their alignment in nematic monomer and consequent UV polymerization of the monomer. The anisotropy of electrical and optical properties of the system depends strongly on the concentration of the nanotubes in the range of 1-10% SWNT being especially strong for smaller concentrations and negligible at higher loads. A simple semi-quantitative model is suggested to account for the orientational behavior of nanotubes in nematic matrices. It successfully describes the observed anisotropy of physical properties at microscale (up to 200 μm) in terms of anchoring of the polymer chains to the nanotubes surface and adjustment of the nanotubes orientation to the nematic direction due to such coupling. The increasing disorientation of the nematic domains at higher nanotubes loads is explained as a development of larger number of LC defects induced by the nanotubes in the nematic matrix due to their intrinsic nature of aggregation. The anisotropy of physical properties at macro scale (several millimeters) is much smaller and less dependable on SWNT concentration because differently oriented LC domains effectively wash out the anisotropy.     

Upgrading of a reliable water supply system at the Kola nuclear power plant for service life extension

Measures taken to develop and put into operation three new exterior channels for emergency process water with two additional 60VTs pumping units, which remain operational even during an earthquake and were installed in the second block pumping station, are described. In addition, the three existing 12NDS horizontal pumping units were used as a basis to develop a third channel for the emergency process water. Above-ground water ducts with thermal insulation and heating systems to prevent freezing during the anticipation state, which is the constant state of the emergency system, were laid. As a result of upgrading with the development of three channels, the emergency process water feeding reached an adequately safe level of reliability. __________ Translated from Atomnaya énergiya, Vol. 100, No. 3, pp. 173–177, March, 2006.