Microstructural stability and creep properties of die casting Mg–4Al–4RE magnesium alloy

The AE44 (Mg–4Al–4RE) alloy was prepared by a hot-chamber die casting method. The microstructure, microstructural stability and creep properties at 175 °C were investigated. The microstructure was analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and the Rietveld method. The results show that die cast AE44 magnesium alloy consists of α-Mg, Al₁₁RE₃, Al₂RE and Al_2.12RE_0.88 phases. The Al₁₁RE₃ phase is thermally stable at 175 °C whereas the metastable Al_2.12RE_0.88 phase undergoes a transition into the equilibrium Al₂RE phase. The alloy investigated is characterized by good creep properties at temperatures of 175 °C and 200 °C.     

Characterization of catalysts obtained from rapidly quenched alloy precursors by electrochemical/chemical processes of material degradation—selected examples

Rapidly quenched amorphous alloys—containing metallic or metalloid elements—are precursors for selective catalysts of many technically important reactions. To increase their activity, various methods of material degradation occurring at the surface and in the bulk of the rapidly quenched alloys have been used for promoting the catalytic performance of such materials. The modifications of the structure, composition, and morphology of the substrate proved to be efficient in transforming inactive metal alloy precursors into active and selective catalysts for hydrogenation, and dehydrogenation of organic compounds, as well as for other processes like steam reforming of methanol. This article presents several examples of characterization of such catalysts and discusses their selectivity and activity in a connection with physical and chemical properties of their surfaces. Moreover, it is shown that scanning electron microscopy, Auger electron spectroscopy, scanning Auger microscopy, and energy dispersive spectrometry allowed the local changes occurring during the activation process to be identified and their implications for catalytic function to be considered.     

Transistor Paint: Environmentally Stable N‐alkyldithienopyrrole and Bithiazole‐Based Copolymer Thin‐Film Transistors Show Reproducible High Mobilities without Annealing

New solution processable 4‐(2‐hexyldecan)‐4H‐bisthieno[2,3‐d:3′,2′‐b]pyrrole and 4,4′‐dialkyl‐2,2′‐bithiazole‐based copolymers (PBTzDTPs) are synthesized with excellent FET performance. These novel copolymers have considerable potential in printable electronics as they have high charge carrier mobilities, excellent air stability, good solution processibility, and no requirement for post‐deposition thermal annealing, all requirements for this field of application. The thin film transistors fabricated from PBTzDTPs achieve field effect mobilities as high as 0.14 cm² V^?1 s^?1 with current on/off ratios up to 10⁶ without thermal annealing. In addition, the devices exhibit stable performance in air, showing no significant degradation over 60 days. Moreover, the polymers described here provide an excellent example of the systems in which higher mobility performance does not require higher crystalline, long‐range ordered structures. Such a system appears to be particularly promising for rapid fabrication techniques, where kinetic conditions usually prevent the development of long‐range order.     

Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine

This paper presents the application of the spectral kurtosis technique for detection of a tooth crack in the planetary gear of a wind turbine. The work originated from a real case of catastrophic gear failure on a wind turbine, which was not detected by currently applied methods. Nevertheless, several sets of complete vibration data were recorded and analyzed. The authors explored a number of methods commonly applied in online vibration monitoring and diagnostic systems. Those methods did not react to the failure until a few minutes before the failure. Then the method of time domain averaging of the meshing vibration is investigated. In this case, however, averaging does not detect any trace of the tooth crack, primarily because of the extreme frequency range (>four decades) of the fault symptoms. The application of the method is shown, and then the limitations of the averaging in such a case are presented and discussed. Finally, the authors propose a method based on spectral kurtosis, which yields good results. This method was able to detect the existence of the tooth crack several weeks before the gear failure.     

Raspberry seed extract effect on the ferroxidase activity of ceruloplasmin isolated from plasma

In this study, the effect of the raspberry seed extract (RSE) on the ferroxidase activity of ceruloplasmin (Cp) isolated from healthy male subject serum was analyzed. The ferroxidase activity of Cp was determined by spectrophotometry using Fe(II) – histidine complex and ferrozine as a chromogenic reagent. The ferroxidase activity of ceruloplasmin was demonstrated in dose-dependent way within the range 22–66 μg/ml. The effect of RSE on Fe(II) concentration, measured as the decrease of Fe(II) concentration in samples and expressed as ΔFe(II), was found to be a dose-dependent within the range 1.20–51.56 μg dm/ml. The ferroxidase activity of Cp was influenced by the RSE within its studied range. However, the addition of the highest concentration of RSE (51.56 μg dm/ml) to the sample containing the highest level of Cp (66 μg/ml) did not affect its ferroxidase activity. It may be suggested that the competition for Fe(II) as the substrate limits the effect of RSE on Cp activity and causes no further changes in Fe(II) elimination.     

Surface potential measurements of Langmuir films of azo dye/liquid crystal mixtures

Two-component films of a non-amphiphilic azo dye and a liquid crystal with strongly polar –CN group were studied at an air–water interface on the basis of the surface potential–mean molecular area dependence recorded simultaneously with the surface pressure–mean molecular area isotherm. Additionally, the morphology of the films was monitored with the aid of Brewster angle microscope. A conventional Langmuir technique was used to form dye/liquid crystal films during reduction and expansion of an area occupied by the molecules. From the surface potential value, the effective dipole moment in the first monolayer formed on the water was calculated. Moreover, the number of molecules with dipole moments directed from the water to the air with respect to those directed towards water was estimated. The influence of the two components' miscibilities upon the surface potential after addition of the dye to the liquid crystal was determined.     

Colour in short-term thermo-mechanically densified veneer of various wood species

Effect of short-term thermo-mechanical (STTM) densification temperature and pressure on the surface colour of veneer of four wood species—alder (Alnus glutinosa Gaertn.), beech (Fagus sylvatica L.), birch (Betula verrucosa Ehrh.), and pine (Pinus sylvestris L.) as well as possible correlations among all determined colour parameters (L*, a*, b*, h, C* and ?E) were investigated. Veneer sheets were densified at temperatures of 100, 150 or 200 °C and pressures of 4, 8 or 12 MPa for 4 min. The results were compared with those of non-densified veneers. The colour change of the samples was evaluated by CIEL*a*b* and L*h*C* colour co-ordinate systems. The results indicated: the temperature and pressure of densification affected to a big extent the colour of the veneer samples, with the effect of densification temperature being more evident than that of pressure. After the densification process, the veneers darkened. Colour changes are most pronounced at the highest densification temperature of 200 °C and very small at the lower temperatures of 100 and 150 °C for all investigated wood species. The change in a* is more pronounced than the change in L* or b*. In general, alder and birch veneer samples are characterized by the highest values of total colour difference followed by pine and beech samples among the four species. The quadratic models can be used for the prediction of surface colour in the densification process. The results of this study indicate that it is possible to govern surface colouration of wood veneers during densification process on an industrial basis.     

Determination of (fluoro)quinolones in eggs by liquid chromatography with fluorescence detection and confirmation by liquid chromatography-tandem mass spectrometry

A multiresidue analytical procedure for determination of seven fluoroquinolones (marbofloxacin, norfloxacin as internal standard, ciprofloxacin, danofloxacin, enrofloxacin, sarafloxacin and difloxacin), and three quinolones (oxolinic acid, nalidixic acid and flumequine) in eggs is presented. The procedure is based on dispersive solid-phase extraction technique with acetonitrile as extractant. Norfloxacin and ciprofloxacin - d8 were used as internal standards to quantify the (fluoro)quinolones. Analyses were realised by LC-FLD for screening and LC-MS/MS for confirmatory purposes. The whole procedure was evaluated according to the Commission Decision 2002/657/EC. Specificity, decision limit (CCα), detection capacity (CCβ), recovery (absolute and relative), precision (repeatability and reproducibility) were determined during validation process. Recoveries (relative) for the LC-FLD screening determination ranged from 85% to 93%, repeatability and reproducibility were in the range of 5-9% to 9-16%, respectively. CCα and CCβ were 13-37 and 17-43 μg/kg pending on analite. For the LC-MS/MS confirmatory method, the relative recoveries were satisfactory (92-99%) with repeatability and reproducibility in the range of 4-7% to 6-12%, respectively. CCα and CCβ were 3-7 and 7-11 μg/kg depending on the analite. The results of both prepared methods showed these analytical procedures simple, rapid, sensitive and suitable for routine control of eggs.