Application of visible and near infrared spectroscopy in non-destructive evaluation of cement materials

In the twenty-first century, there has been rapid urbanization in economically emerging countries. Many scientific research studies have proposed methods to monitor the quality of materials used in engineering works. Quality inspections are most often made of structure-related materials such as concrete. All the concrete used in construction work is subjected to a test that breaks the samples to evaluate its final mechanical strength. In this sense, remote sensing can contribute to mapping and monitoring construction materials, allowing investigation and identification of various properties such as mechanical strength and water content in a non-destructive manner. The materials can be inspected directly on site, in a rapid, non-invasive, and inexpensive manner; this is crucial for the ongoing process of construction. The spectral behaviour of four different mechanical strengths of two cement materials based on Portland cement, cement paste, and mortar was observed using a FieldSpec® 3 spectroradiometer. The spectral curves generated by recording the reflected and absorbed electromagnetic radiation of the samples were interpreted based on the theory of vibrational and electronic spectroscopy. The objective of this work is to show a novel technique for assisting in the analysis of solid samples using visible and near infrared spectroscopy. Through this study, a spectral contrast between different samples of the paste and mortar was found. Besides, it was possible to detect the presence and the corresponding proportion of water in the samples. Wavelet analysis enabled records of statistical evidence of spectral contrast, and showed that the depth of water absorption features is inversely proportional to compressive strength in the cement materials under study. This work is innovative, because there are no studies in the literature on the application of this technique as an aid tool for differentiating compressive strengths of Portland-cement-based materials.     

Visualizing the evolution of a web-based social network

Weblogs are dynamic websites updated via easy-to-use content management systems and organized as a set of chronologically ordered stories, frequently built around a link or including links to other weblogs. Since they are managed by individuals, their links tend to mirror or, in some cases, establish new types of social relations, thereby creating a social network. Studying the evolution of this network allows the discovery of emerging social structures and their growth trends. In this paper, we demonstrate the advantages of using the self-organizing maps (SOM) to visualize the evolution of a social network formed by a set of blogs, from their beginning to their current state. By observing the position a weblog is mapped to, it is easy to see what communities it belongs to nowadays, and how and when it became a part of those communities. The proposed procedure gives some insight on how communities are formed and have evolved. In this study, we apply this method to Blogalia, a blog-hosting site from which we have obtained a complete set of data and, by using SOM projections, we have drawn some conclusions on what drives the evolution of its implicit social network.     

Simultaneous determination of flavor enhancers in stock cube samples by using spectrophotometric data and multivariate calibration

Spectrophotometric data followed by a suitable treatment of chemometric analysis were used for the simultaneous determination of monosodium glutamate (MSG), guanosine 5′-monophosphate (GMP) and inosine 5′-monophosphate (IMP) in stock cube samples, without any previous extraction step. By this way, the overlapping of the absorption spectra was resolved using a PLS-1 model. The concentration for experimental calibration matrix were varied between 5.03–34.2 μg mL⁻¹ for IMP and GMP, and 448–1399 μg mL⁻¹ for MSG. The relative errors of prediction (REPCV %) were 1.8, 2.8 and 3.1 for IMP, GMP and MSG, respectively.     

Can Human Oral Mucosa Stem Cells Differentiate to Corneal Epithelia?

Human oral mucosa stem cells (hOMSCs) arise from the neural crest, they can self-renew, proliferate, and differentiate to several cell lines and could represent a good source for application in tissue engineering. Because of their anatomical location, hOMSCs are easy to isolate, have multilineage differentiation capacity and express embryonic stem cells markers such as—Sox2, Oct3/4 and Nanog. We have used SHEM (supplemented hormonal epithelial medium) media and cultured hOMSCs over human amniotic membrane and determined the cell’s capacity to differentiate to an epithelial-like phenotype and to express corneal specific epithelial markers—CK3, CK12, CK19, Pan-cadherin and E-cadherin. Our results showed that hOMSCs possess the capacity to attach to the amniotic membrane and express CK3, CK19, Pan-Cadherin and E-Cadherin without induction with SHEM media and expressed CK12 or changed the expression pattern of E-Cadherin to a punctual-like feature when treated with SHEM media. The results observed in this study show that hOMSCs possess the potential to differentiate toward epithelial cells. In conclusion, our results revealed that hOMSCs readily express markers for corneal determination and could provide the ophthalmology field with a therapeutic alternative for tissue engineering to achieve corneal replacement when compared with other techniques. Nevertheless, further studies are needed to develop a predictable therapeutic alternative for cornea replacement.     

Fatty acid profiles in meat from Caiman yacare (Caiman crocodilus yacare) raised in the wild or in captivity

Chemical composition and fatty acid profiles were determined in Caiman yacare meat originating from the neck and tail cuts of animals raised in the wild (n = 6) or in captivity (n = 6), slaughtered at a live weight of approximately 6 kg. All experimental methods were approved by the appropriate environmental protection agencies. Most chemical components were affected by the origin-cut interaction, with the tail cut of wild animals having the highest amount of intramuscular fat (19.2% of DM) and the lowest of moisture (71.8%) and protein (77.0% of DM). Yacare meat had low amounts of SFA (35.1%), which were similar (P > 0.05) in the cuts and origins studied. The total amount of PUFA was higher (P < 0.05) in wild (31.0%) than in captive animals (23.6%), and n − 3 fatty acids had means of about 5% and 2% for the same groups, respectively (P < 0.05). In general, the FA profile of intramuscular fat in yacare meat had a desirable PUFA/SFA ratio above 0.4.     

Comparison of matrix solid-phase dispersion and liquid-liquid extraction for the chromatographic determination of fenthion and its metabolites in olives and olive oils

Matrix solid-phase dispersion (MSPD) methodology has been developed to extract fenthion and its metabolites from olives and olive oils, and the technique compared with conventional liquid-liquid extraction (LLE). The method was applied to olives and olive oil samples obtained from olive groves treated with fenthion. Pesticide residues were analysed by gas chromatography (GC) using a nitrogen-phosphorus detector. Both extraction methods gave a linear response over the concentration range assayed (0.03-1 mg kg^-1 for MSPD and 0.1-1 mg kg^-1 for LLE). Recoveries and RSD (n = 6) values in olives were 85-112% and 2-6% for MSPD, and 68-108% and 4-16% for LLE, respectively. In the case of olive oil, recoveries and RSD (n = 6) values were 67-98% and 5-11% for MSPD, and 63-115% and 6-14% for LLE, respectively. When compared to LLE, the newly developed MSPD method was twice as sensitive and required 10 times less sample weight.     

Relative quantification of <Emphasis Type="Italic">Vitis vinifera</Emphasis> L. varieties in musts by microsatellite DNA analysis

Varietal wines are defined as made primarily from a single variety of grape, which is identified on the label. However the inclusion of other varieties in their production is permitted under defined percentages. The fact that different grape varieties/varietal wines present far different economical values can attract fraudulent practices. Thus the development of methods, which allow the quantification of those varieties, is of crucial importance. The first approach to the method for the relative quantification of must containing two varieties based on microsatellite DNA analysis is presented. Quantification was achieved by densitometry measurements of the amplification products of the pooled varieties, obtained with loci VVMD6 and VVMD7, after their separation and staining on polyacrilamide gels. We have found that a good correlation between the proportion of each variety in must and the signal intensity of the alleles are dependent on the variety (varietal effect) and the microsatellite locus used. The relative quantification of musts can be accomplished by the presented method depending on the presence of overlapping alleles, and the composition of the varieties and their relative amounts.     

How efficient are African electricity companies? Evidence from the Southern African countries

This paper is a first attempt at documenting efficiency levels in Africa's electricity firms, their evolution and the sources of this evolution. The analysis is based on a sample of 12 operators providing services in the 12 country members of the Southern Africa Power Pool. We focus on the changes in total factor productivity (TFP) of the largest operators in each country between 1998 and 2005. We then rely on a data envelopment analysis (DEA) decomposition to identify the sources of the changes in TFP. The results suggest fairly comparable levels of efficiency in the region and performance levels and evolution quite independent of the degree of vertical integration, the presence of a private actor or the main sources of energy supply. The analysis suggest that although the companies have not made significant improvements during the period of analysis in using their capital and human assets, they have done much better in adopting better technologies and better commercial practices. No clear correlation could be associated with the adoption of reforms during the last decade and data limitations impede a more refined assessment of the impact of reforms on efficiency at this stage.     

Complexation of Surfactant/β‐Cyclodextrin to Inhibit Surfactant Adsorption onto Sand,Kaolin, and Shale for Applications in Enhanced Oil Recovery Processes. Part I: Static Adsorption Analysis

Surfactant adsorption onto solid surfaces is a major issue during surfactant flooding in enhanced oil recovery applications; it decreases the effectiveness of the chemical injection making the process uneconomical. Therefore, it was hypothesized that the adsorption of surfactant onto solid surfaces could be inhibited using a surfactant delivery system based on the complexation between the hydrophobic tail of anionic surfactants and β‐cyclodextrin (β‐CD). Proton nuclear magnetic resonance spectroscopy was used to confirm the complexation of sodium dodecyl sulfate (SDS)/β‐CD. Surface tension analysis was used to establish the stoichiometry of the complexation and the binding constant (K_a). Static adsorption testing was applied to determine the adsorption of surfactant onto different solids (sandstone, shale, and kaolinite). The release of the surfactant from the β‐CD cavity was qualitatively evaluated through bottle testing. The formation of the inclusion complex SDS/β‐CD with a 1:1 stoichiometry was confirmed. The K_a of the complexations increases as salinity and hardness concentration increases. The encapsulation of the surfactant into the β‐CD cavity decreases the adsorption of surfactant onto solid surfaces up to 79 %. Qualitative observations indicate that in the presence of solid adsorbents partially saturated with crude oil, the β‐CD cavity releases surfactant molecules, which migrate towards the oil–water interface.