Treatment of electroplating wastewater containing Cu2+, Zn2+ and Cr(VI) by electrocoagulation

The performance of electrocoagulation, with aluminium sacrificial anode, in the treatment of metal ions (Cu2+, Zn2+ and Cr(VI)) containing wastewater, has been investigated. Several working parameters, such as pH, current density and metal ion concentrations were studied in an attempt to achieve a higher removal capacity. Results obtained with synthetic wastewater revealed that the most effective removal capacities of studied metals could be achieved when the pH was kept between 4 and 8. In addition, the increase of current density, in the range 0.8-4.8 A dm(-2), enhanced the treatment rate without affecting the charge loading, required to reduce metal ion concentrations under the admissible legal levels. The removal rates of copper and zinc were found to be five times quicker than chromium because of a difference in the removal mechanisms. The process was successfully applied to the treatment of an electroplating wastewater where an effective reduction of (Cu2+, Zn2+ and Cr(VI)) concentrations under legal limits was obtained, just after 20 min. The electrode and electricity consumptions were found to be 1 g l(-1) and 32 A h l(-1), respectively. The method was found to be highly efficient and relatively fast compared to conventional existing techniques.     

Effects of Fe/SDS and Au nanoparticles on P. aeruginosa bacterial growth and biosurfactant production

The aim of this study was to evaluate the effects of iron (Fe)/SDS and gold (Au) nanoparticles on growth and biosurfactant production of Pseudomonas aeruginosa PBCC5. The concentrations of the nanoparticles used were 1, 500 and 1000 mg/l. In this research, the surface tension of biosurfactant, dry weight of biosurfactant and biomass, emulsification indexes (E₂₄) were measured and transmission electron microscopy analysis was used to monitor the nanoparticles. The test results showed that the effect of nanoparticles on the bacterial growth and biosurfactant production varied corresponding to the type and concentration of nanoparticles. Fe/SDS nanoparticles showed no bacterial toxicity when the concentration of nanoparticles was 1 mg/ml and increased the growth and biosurfactant production, 23.21 and 20.73%, respectively. While at higher concentrations (500, 1000 mg/l), the nanoparticles suppressed bacterial growth as well as biosurfactant production. Similarly, Au nanoparticles had no bacterial toxicity and also increased bacterial growth and biosurfactant production. The surface tensions of all samples decreased from 72 of distiled water to 32–35 mN/m.Inspec keywords: nanoparticles, iron, gold, nanofabrication, nanomedicine, surfactants, biomedical materials, surface tension, renewable materials, transmission electron microscopy, microorganismsOther keywords: Au nanoparticles, P. aeruginosa bacterial growth, biosurfactant production, Pseudomonas aeruginosa PBCC5, surface tension, biomass, emulsification indexes, dry weight, transmission electron microscopy, Fe‐SDS nanoparticles, distiled water, Fe, Au     

Catalytic graphitization and formation of macroporous-activated carbon nanofibers from salt-induced and H2S-treated polyacrylonitrile

We present here a facile method to produce macroporous-activated carbon nanofibers (AMP-CNFs) by post-treating electrospun cobalt(II) chloride (CoCl₂) containing polyacrylonitrile (PAN/CoCl₂) nanofibers with hydrogen sulfide (H₂S) followed by carbonization. A range of techniques including scanning and transmission electron microscopy, FTIR and Raman spectroscopy is used to examine and characterize the process. Because of the phase behavior between carbon and cobalt, cobalt particles are formed in the nanofibers, some of which leave the fibers during the heat treatment process leading to macroporous fibrous structures. The number of the macroporous increase significantly with increasing CoCl₂ concentration in the precursor H₂S-treated PAN/CoCl₂ nanofibers. The cobalt phase in the fibers also leads to catalytic graphitization of the carbon nanofibers. The produced AMP-CNFs may be a promising candidates in many applications including anode layer in lithium ion batteries, air and liquid purifiers in filters, as well as in biomedical applications.     

Inexpensive, universal serial bus-powered and fully portable lab-on-a-chip-based capillary electrophoresis instrument

Capillary electrophoresis is a cornerstone of lab-on-a-chip (LOC) implementations for medical diagnostics. However, the infrastructure needed to operate electrophoretic LOC implementations tends to be large and expensive, hindering the development of portable or low-cost systems. A custom-designed and highly integrated microelectronic chip for high-voltage generation switching and interfacing is recently developed. Here, the authors integrate the microelectronic chip with a microfluidic chip, a solid-state laser, filter, lens and several dollars worth of electronic components to form an inexpensive and portable platform, which is the size of a mobile telephone. This compact system has such reduced power requirements that the complete platform can be operated using a universal serial bus link to a computer. It is believed that this system represents a significant advancement in practical LOC implementations for point-of-care medical diagnostics.     

Damage evolution and infrared thermography in woven composite laminates under fatigue loading

An analytical model based on cumulative damage has been used for predicting the damage evolution in composite materials. The model is verified with experimental data from a carbon/epoxy composite fatigued under tension–tension load. Fatigue tests of specimens have been monitored with an infra-red thermography system. By analysing the temperature of the external surface during the application of cyclic loading, it is possible to evaluate the damage evolution. The model agrees well with the experimental data, and it can be used to predict the evolution of damage in composites.     

Multiple-step martensitic transformations in the Ni51Ti49 single crystal

Multiple-step martensitic transformations of an aged Ni₅₁Ti₄₉ single crystal using calorimetric method were investigated. Results show that for short aging times (10–45 min) multiple-step martensitic transformations on cooling occur in two steps. Applying intermediate aging times (1.25–4 h) results in three steps and long aging times (more than 8 h) lead to two-step martensitic transformations again. This behavior has not been recognized in NiTi single crystals in literatures. It can be related to the heterogeneity of composition and stress fields around Ni₄Ti₃ precipitates.     

Biocompatibility of heparin-grafted hemodialysis membranes: impact on monocyte chemoattractant protein-1 circulating level and oxidative status

This prospective observational study aimed at evaluating efficacy and biocompatibility performances of the new heparin-coated Evodial dialyzers with/without systemic heparin reduction. After a 4-week wash-out period with reference polysulfone F70S dialyzers, 6 hemodialysis patients were sequentially dialyzed with Evodial, F70S, and Evodial dialyzers using 30% heparin reduction, each period of treatment was 4 weeks. Removal rates (RR) (urea, creatinine, and β2-microglobulin), dialysis dose, and instantaneous clearances (urea and creatinine) were measured as well as inflammatory (C-reactive protein, fibrinogen, interleukin 6, tumor necrosis factor α, and monocyte chemoattractant protein-1) and oxidative stress (OS) (superoxide anion, homocysteine, and isoprostanes) parameters at the end of each study period. Patients treated with Evodial or F70S dialyzers for 4 weeks presented comparable dialysis efficacy parameters including urea and creatinine RR, dialysis dose and instantaneous clearances. By contrast, a significantly lower but reasonably good β2-microglobulin RR was achieved with Evodial dialyzers. Regarding biocompatibility, no significant difference was observed with inflammation and OS except for postdialysis monocyte chemoattractant protein-1 which significantly decreased with Evodial dialyzers. Thirty percent heparinization reduction with Evodial dialyzers did not induce any change in inflammation but led to an improvement in OS as demonstrated by a decrease in postdialysis superoxide production and predialysis homocysteine and isoprostane. This bioactive dialyzer together with heparin dose reduction represents a good trade-off between efficacy and biocompatibility performance (improvement in OS with a weak decrease in efficacy) and its use is encouraging for hemodialysis patients not only in reducing OS but also in improving patient comorbid conditions due to lesser heparin side effects.     

A statistical-based material and process guidelines for design of carbon nanotube field-effect transistors in gigascale integrated circuits

Carbon nanotube field-effect transistors (CNFETs) show great promise as building blocks of future integrated circuits. However, synthesizing single-walled carbon nanotubes (CNTs) with accurate chirality and exact positioning control has been widely acknowledged as an exceedingly complex task. Indeed, density and chirality variations in CNT growth can compromise the reliability of CNFET-based circuits. In this paper, we present a novel statistical compact model to estimate the failure probability of CNFETs to provide some material and process guidelines for the design of CNFETs in gigascale integrated circuits. We use measured CNT spacing distributions within the framework of detailed failure analysis to demonstrate that both the CNT density and the ratio of metallic to semiconducting CNTs play dominant roles in defining the failure probability of CNFETs. Besides, it is argued that the large-scale integration of these devices within an integrated circuit will be feasible only if a specific range of CNT density with an acceptable ratio of semiconducting to metallic CNTs can be adjusted in a typical synthesis process.     

Détermination expérimentale des propriétés hydriques des pâtes de ciment durcies—Mise en évidence des phénomènes d'hystérésis

Résumé Dans cet article, les auteurs comparent les propriétés structurales et hydriques de deux pates de ciment durcies, l'une ordinaire (CO) et l'autre (CH) représentative de bétons à très hautes performances dont l'utilisation est croissante à l'heure actuelle dans le domaine de la construction. L'analyse de la structure poreuse montre le caractère fortement compact de la microstructure de la pate de ciment durcie CH. Ce caractère est également illustré par les isothermes de désorption et d'adsorption de vapeur d'eau. Les courbes obtenues dans deux laboratoires sont comparées. Elles mettent en évidence la faible sensibilité des matériaux à très hautes performances vis-à-vis des variations de l'humidité relative de leur environnement, dans le domaine HR>50%. Ceci laisse prévoir des déformations hygrométriques (retrait de dessiccation) réduites dans ce domaine, par rapport aux matériaux ordinaires. Les résultats des mesures de perméabilité à la vapeur d'eau montrent l'influence du paramètre teneur en eau. La pate CH présente, dans le domaine des fortes humidités relatives, une perméabilité plus faible que celle de la pate CO. La perméabilité à la vapeur d'eau de ces pates de ciment durcies reste toutefois très faible par rapport à celle d'autres matériaux de construction.

---

Experimental determination of moisture properties of hardened cement pastes, showing hysteresis effects

In this paper, the structure and moisture properties of two hardened cement pastes are compared. One paste (CO) is an ordinary mix. The other paste (CH) is representative of high-performance concretes which are today more and more widely used in construction. The pore structure analysis shows the very dense microstructure of the hardened cement paste CH. This feature is also pointed out with water vapour desorption and adsorption isotherms. The curves obtained in two laboratories are compared. They highlight that high-performance materials are fairly insensitive to environmental relative humidity variations, in the range RH>50%. Smaller hygral strains (drying shrinkage) can be expected in this range, as compared to ordinary mixes. The results of water vapour permeability measurements show the influence of the water content. The permeability obtained for the hardened cement paste CH is lower than for CO, in the high relative humidity range. The water vapour permeability of these hardened cement pastes is, however, very low as compared to other building materials.

---

---

Note de la rédaction Mme V. Baroghel Bouny travaille au Laboratoire Central des Ponts et Chaussées (LCPC), Membre Titulaire de la RILEM.     

Preparation and Characterization of Magnetite–Chitosan Nanoparticles and Evaluation of Their Cytotoxicity Effects on MCF7 and Fibroblast Cells

Nowadays, magnetic nanoparticles play a key role in drug treatment. However, if they are uncoated, they might aggregate and cause embolism in drug delivery. To avoid this, they are generally coated with polymers. In this investigation, magnetic nanoparticles (MNPs) were coated with chitosan through in situ co-precipitation process and their properties in addition to their cytotoxicity in MCF7 and fibroblast cells were analyzed. The results showed MNPs–chitosan nanoparticles would contain an average mean diameter of 32 nm and a saturation magnetization (M _S) value of 38.87 emu/g. To characterize the synthesized nanoparticles in terms of structural, morphological and magnetic properties, Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA) and vibrating sample magnetometry (VSM) studies were used. Toxicity test was also done to investigate whether their presence would cause any toxicity in the body; in addition, antibacterial assay was done to analyze if nanoparticles could be used as an antimicrobial agent.