Development and numerical validation of a new model for walls with phase change materials implemented in TRNSYS

This paper presents a model of a wall with variable properties dedicated to modelling phase change materials (PCMs) in building envelopes. The model is implemented in the TRNSYS simulation tool and referred to as Type 3258. The 1-D conduction heat transfer equation is solved using an explicit finite-difference method coupled with an enthalpy method to consider the variable PCM thermal capacity. This model includes temperature-dependent thermal conductivity and PCM-specific effects like hysteresis and supercooling. The stability conditions are discussed and the algorithm implemented in TRNSYS is described. A numerical validation performed on wall test cases proposed by the International Energy Agency is presented, showing that the developed model is in agreement with reference models. The paper also discusses the impact of temporal and spatial discretization on the model performance. Modelling problems encountered when using an effective heat capacity method (compared to an enthalpy method) and when representing supercooling are also discussed.     

两类典型碱活性岩石试体在碱溶液中的膨胀行为

为确定以Spratt硅质灰岩(SL岩石)和Pittsburg泥质白云质灰岩(PL岩石)为代表的两类典型碱活性岩石试体在碱性环境中的膨胀来源和发展评定岩石碱活性的方法,研究了不同条件下SL和PL岩石在砂浆和混凝土中的膨胀行为.研究结果表明:SL岩石在砂浆和混凝土中均呈高ASR膨胀性,尽管其中的少量白云石可发生去白云石化反应;决定PL岩石高膨胀性的机制是ACR,与传统的ASR有本质不同,尽管其中含有的少量微晶石英可参与与碱的反应并可能对岩石的膨胀有一定贡献.采用能保持岩石微观结构构造特征的颗粒尺寸是正确评估PL岩石碱活性的关键.利用ASR和ACR对粉煤灰等混合材及含锂化合物的不同响应,特别是LiOH的抑制ASR膨胀和引发ACR膨胀的双重效应,在实验室可以快速区别同时含有白云石和石英的灰岩类集料的活性来源.     

Improving the transfer of near infrared prediction models by orthogonal methods

Eight calibration transfer methods based on the removal of orthogonal signal were compared for the standardization of whole soybean protein and oil models. Dynamic orthogonal projection (DOP), transfer by orthogonal projection (TOP), error removal by orthogonal subtraction (EROS), orthogonal signal correction (OSC), and orthogonal projections to latent structures (O-PLS) as well as the modification and extension of some of these methods were compared in the transfer of models in intra and inter-brand situations using two Foss Infratecs and two Bruins OmegAnalyzerGs. For each brand, a master was designated and its models transferred onto the second unit of its network and the two units of the second brand. Calibration models were transferable from brand to brand with similar or better precision than when each instrument was calibrated on its own calibration set (for Infratec 1229, the relative predictive determinant (RPD) increased in intra and inter-brand calibration transfer situations from 10.42 to 11.45 and 10.57, with DOP and EROS respectively). Performance of each method was different across parameters, instruments, and validation sets. DOP modifications on the determination of the difference matrix showed promising results while TOP and EROS extensions to include variability specifically present in certain crop years did not bring any beneficial effects.     

Real options and technology management: Assessing technology migration options in wireless industry

The wireless industry is currently undergoing a major transition from second generation (2G) to third generation (3G) wireless technologies. The paper attempts to assess wireless technology migration options using the real options approach (ROA) to support the wireless network operators’ strategic decisions: to migrate or not, if so, which migration path to take. The preliminary result shows that the evolution of wireless network technologies between generations is desirable, but not within generations. Finally, from a strategic perspective, we should consider the possible challenges that may hinder migration. By identifying these challenges, we can be more watchful of transition pitfalls and can choose a better alternative.     

Reactive and non-reactive transport modelling in partially water saturated argillaceous porous media around the ventilation experiment, Mont Terri

At Mont Terri Underground Research Laboratory (URL) Switzerland, a specific experiment has been performed in a tunnel, in order to investigate the hydro-mechano-chemical (HMC) perturbations induced in the argillaceous formation by forced ventilation. This experiment has been selected in the international project DECOVALEX to be used for process model development and validation. The numerical simulation of the geochemical response to the ventilation experiment (VE) is the object of the present paper, focusing on the transport of chloride as a conservative species and sulphate as a reactive species. Utilising the validated hydro-mechanical (HM) results from earlier steps of the DECOVALEX task, reactive and non-reactive transport models, incorporating the current understanding of the geochemistry at the site, were successfully constructed for the whole experimental period. The associated parametric and process uncertainty analyses clearly demonstrate that the basic HM understanding must be sound. However, to demonstrate this degree of robustness, the explicit inclusion of process representations of water desaturation, liquid vaporisation, species exclusion porosity, and redox processes, is required.     

Preliminary identification of potential markets for off-grid electrification: tool development and a case study of Ghana

With more than one billion people lacking access to electricity in the world, ensuring universal access to electricity by 2030 remains a major challenge which cannot be left to the government initiatives alone. Access to local information and identification of potential areas for investment can be a challenge for investors. This paper provides a tool for preliminary assessment of potential markets for off-grid electrification in developing countries and applies this to Ghana to demonstrate its applicability. A multi-criteria approach is used to rank the districts according to the overall potential and the best markets and least favourable areas for investment are identified. The tool offers flexibility to include new inputs to the analysis and the factor weights can be adjusted as appropriate. The case study shows that the tool can effectively identify potential areas from a list of candidates and offers support to analysts.     

Evidence of perchlorate (ClO4-) reduction in plant tissues (poplar tree) using radio-labeled 36ClO4-

Phytoremediation of perchlorate (ClO4) by poplar trees Populus deltoidex nigrawas investigated using small cuttings growing in hydroponic Hoagland solution and plant tissue cultures, consisting of spherical photosynthetic cell aggregates (i.e. nodules) developing in Murashige and Skoog culture medium. Both plants and nodules were grown under a 16 h/8 h photoperiod cycle and under sterile conditions. Degradation experiments, performed by the incubation of pregrown plants and nodules in the presence of 36Cl radio-labeled ClO4- (25 mg L(-1)), showed a reduction of the initial ClO4- concentration in the solution of about 50% after 30 d of incubation. Analysis of the distribution of radioactivity in different plant fractions indicated that 27.4% of the total was translocated to the leaves, while 66.9% remained in the solution. Very little radioactivity (less than 3.0%) was detected in the other parts of the plants. 32.0% of the radioactivity recovered in the solution was shown to consist of 36Cl- and 68.0% of nontransformed 36ClO4-. The radioactivity recovered in the leaf extracts was distributed as chloride (36Cl-) (1.6% of the total), chlorite (36ClO2-) (2.4%), chlorate (36ClO3-) (4.8%), nontransformed 36ClO4- (21.6%), and an unidentified organic compound (1.4%). The radioactivity recovered in the solution containing submerged nodules consisted of 36Cl- (6.4% of the total), 36ClO3- (1.3%), and nontransformed 36ClO4- (51.5%). Radioactivity detected in the nodule extracts was distributed as 36Cl- (2.0% of the total), 36ClO2- (5.2%), 36ClO3- (6.4%), 36ClO4- (22.7%), and an unidentified organic compound (0.5%). These results provide evidence of perchlorate reduction inside poplar tree tissues. 36ClO4- is partially reduced to 36ClO3-, 36ClO2-, and 36Cl-.     

Microgravity materials and life sciences research applications of digital holography

We investigate the utility of digital holographic interferometry for analyzing gravity-dependent mass transport phenomena as applicable to materials and life science research topics. Digital holography is useful for measurement of parameters that introduce phase changes in light traversing the material of interest, such as temperature or concentration variations in an aqueous environment. We have constructed, tested, and verified a compact, portable digital holographic monitor (DHM) suitable for characterization of transparent samples. It has proved useful for the study of systems such as protein crystal growth solutions and has been proposed for further application into studies involving microbial metabolism. The DHM is also sufficiently rugged for field operation in challenging environments a s may be encountered in a spacecraft or industrial setting. We discuss some system capabilities and limitations.     

Design and performance of the dilution cooler system for the Planck mission

We report the design, main features and on-ground qualification of the dilution cooler qualification model for the Planck mission. We mainly emphasize the innovative cryogenics and structural aspects developed in order to meet the severe requirements of the mission. We also report the results of the dilution cooler itself in the 100 mK range after successful tests of the qualification model on a dedicated test bench.