Influence of High-Pressure Coolant Assistance on the Machinability of the Titanium Alloy Ti555–3

The origin of this article is the quantification of productivity gains and the improvement in surface integrity seen for a recent titanium alloy that is seeing increasing use in the aeronautical industry. The Ti555–3 titanium alloy, which is starting to find greater application in the aeronautical field, exhibits certain difficulties in terms of machining. High Pressure Coolant (HPC) assisted turning consists of projecting a high pressure coolant jet between the chip and the tool. Comparisons are made between assisted turning using variable jet pressure and conventional turning (dry and classical lubrication). It is shown that it is possible to improve productivity by using HPC-assisted machining. The results highlight good chip fragmentation and a great improvement of tool life with HPC assistance. Surface integrity is also shown to be improved, through surface roughness parameters that decrease, and surface residual stresses that become more compressive. These effects have been attributed to the thermo-mechanical action of the coolant jet resulting in lower cutting forces, lower coefficient of friction and lower temperature in the cutting zone.     

A long-term view of nutrient transfers through the Seine river continuum

A model (the Riverstrahler model) is used to describe nutrient transfer and transformation at the scale of the whole drainage network of the Seine based on information concerning the basic mechanisms governing N, P and Si inputs to the drainage network and in-stream transformation and retention. It was used to calculate the budget of these nutrients through the whole river continuum from land to sea. With the help of historical documents, the constraints used as forcing function in this model were reconstructed to express the changing conditions of land-use and urban population over the last five hundred years. The corresponding scenarios were run for different hydrological regimes including dry, mean and wet conditions. The results were validated on the long-term series of nutrient measurements spanning more than a century available at some stations on the Seine, upstream and downstream of the city of Paris. The model was also used to explore past and future trends in nutrient loading, retention and delivery to the coastal zone, in response to human management of the terrestrial watershed. Beside the initial pristine state, used as an idealized reference state (with N, P and Si delivered fluxes of about 45-110 kg N km(-2) yr(-1), 2-5 kg P km(-2) yr(-1), 510-1325 kg Si km(-2) yr(-1)), four periods were distinguished. The first one is that of the traditional cottage economy which prevailed, with quite a constant total population, until the end of the 18th century. N, P and Si fluxes were about 235-750 kg N km(-2) yr(-1), 15-60 kg P km(-2) yr(-1) and 425-1280 kg Si km(-2) yr(-1), depending on hydrological conditions. The second period, from the beginning of the 19th century to about the 1950's, corresponded to rapid increase in the total and urban population with a corresponding increase of point sources of N and P. From 1950 onwards, modern farming practices resulted in a dramatic increase in diffuse sources of nitrogen and to a lesser extent phosphorus: riverine N and P export reached 1320-2800 kg N km(-2) yr(-1), and 310-340 kg P km(-2) yr(-1): silica export remained fairly constant at around 410-1260 kg Si km(-2) yr(-1) depending on the hydrological conditions. In the 1990's, the fourth period is represented by a stabilized population and improved wastewater treatment, when the export of phosphorus is reduced to values as low as 40-60 kg P km(-2) yr(-1), but without as effective a reduction of nitrogen export. This represents an unprecedented situation for the marine coastal system, i.e. a shift from nitrogen to phosphorus limitation, as nitrogen is still delivered far in excess of the amount of silica available for diatom blooms.     

Evaluation of enrichment-free PCR-based detection on the rfbE gene of Escherichia coli O157--application to municipal wastewater

Escherichia coli O157 strains have emerged as important human enteric pathogens. Strains that express the O-antigen 157 are commonly associated with severe clinical manifestations, including bloody diarrhea, hemorrhagic colitis, and hemolytic uremic syndrome. E. coli O157 strains may be transmitted in a variety of ways, including food, water and person-to-person or animal-to-person contact. Fecal contamination is one source of environmental contamination and is responsible for the presence of these pathogens in the environment. We used a specific and sensitive PCR assay based on the rfbE gene to detect low levels of these pathogens in wastewater. The set of primers used was designed to amplify an intragenic segment of the rfbE gene. The amplification assay detected 200 CFU of E. coli O157 in pure water. The prevalence of E. coli O157 in the effluents of 44 wastewater treatment plants was determined (7%).     

Impact of microparticles on UV disinfection of indigenous aerobic spores

Numerous studies have shown that the efficacy of ultraviolet (UV) disinfection can be hindered by the presence of particles that can shield microorganisms. The main objective of this study was to determine to what extent natural particulate matter can shield indigenous spores of aerobic spore-forming bacteria (ASFB) from UV rays. The extent of the protective shielding was assessed by comparing the inactivation rates in three water fractions (untreated, dispersed and filtered on an 8 microm membrane) using a collimated beam apparatus with a low-pressure lamp emitting at 254 nm. Levels of inactivation were then related to the distribution and abundance of particles as measured by microflow imaging. Disinfection assays were completed on two source waters of different quality and particle content. A protocol was developed to break down particles and disperse aggregates (addition of 100mg/L of Zwittergent 3-12 and blending at 8000 rpm for 4 min). Particle size distribution (PSD) analysis confirmed a statistically significant decrease in the number of particles for diameter ranges above 5 microm following the dispersion protocol and 8 microm filtration. The fluence required to reach 1-log inactivation of ASFB spores was independent of particle concentration, while that required to reach 2-log inactivation or more was correlated with the concentration of particles larger than 8 microm (R(2)>0.61). Results suggest that natural particulate matter can protect indigenous organisms from UV radiation in waters with elevated particle content, while source water with low particle counts may not be subject to this interference.     

Parameter estimation and prediction uncertainties for multi-response kinetic models with uncertain inputs

Error-in-variables model (EVM) methods are used for parameter estimation when independent variables are uncertain. During EVM parameter estimation, output measurement variances are required as weighting factors in the objective function. These variances can be estimated based on data from replicate experiments. However, conducting replicates is complicated when independent variables are uncertain. Instead, pseudo-replicate runs may be performed where the target values of inputs for repeated runs are the same, but the true input values may be different. Here, we propose a method to estimate output-measurement variances for use in multivariate EVM estimation problems, based on pseudo-replicate data. We also propose a bootstrap technique for quantifying uncertainties in resulting parameter estimates and model predictions. The methods are illustrated using a case study involving n-hexane hydroisomerization in a well-mixed reactor. Case-study results reveal that assumptions about input uncertainties can have important influences on parameter estimates, model predictions and their confidence intervals.     

Additional vectors for PCR-based gene tagging in Saccharomyces cerevisiae and Schizosaccharomyces pombe using nourseothricin resistance

The one-step PCR-mediated technique used for modification of chromosomal loci is a powerful tool for functional analysis in yeast. Both Saccharomyces cerevisiae and Schizosaccharomyces pombe are amenable to this technique. However, the scarce availability of selectable markers for Sz. pombe hampers the easy use of this technique in this species. Here, we describe the construction of new vectors deriving from the pFA6a family, which are suitable for tagging in both yeasts owing to the presence of a nourseothricin-resistance cassette. These plasmids allow various gene manipulations at chromosomal loci, viz. N- and C-terminal tagging with 3HA (haemagglutinin) or 13Myc epitopes, GST (glutathione S-transferase), 4TAP (tandem affinity purification) and several GFP (green fluorescent protein) isoforms. For N-terminal modifications, the use of different promoters allows constitutive (PADH1) or regulatable (PGAL1) promoters for S. cerevisiae and derivatives of Pnmt1 for Sz. pombe expression.     

Composition and antimalarial activity in vitro of volatile components of Lippia multiflora

The essential oil of Lippia multiflora was prepared by hydrodistillation of leaves and stalks and characterized by GC and mass spectroscopy. The oil was tested for antimalarial activity on in vitro cultures of Plasmodium falciparum (FcB1-Columbia chloroquine-resistant strain and F32-Tanzania chloroquine-sensitive strain). The dilutions inhibiting the in vitro growth of the parasite by 50% 24 and 72 hr after administration of the essential oil to the parasite culture were 1/12,000 and 1/21,000, respectively. When tested on a highly synchronized culture, the essential oil inhibited growth mostly at the trophozoite-schizont step, indicating a potential effect on the first nuclear division of the parasite.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

Meeting the challenge of water sustainability: The role of process systems engineering

This white paper is the result of discussions during the FIPSE-4 conference ( http://fi-in-pse.org ) in June 2018. It aims to highlight open problems and provide directions for future research in the area of water with emphasis on its agricultural usages. Some of the open problems discussed are: (a) the use of ecosystems as unit operations to understand their role in providing freshwater and in cleaning polluted water; (b) consideration of interactions and independencies between flows of water and other resources, such as food, energy, materials, ecosystem services, and environmental emissions; (c) challenges in modeling, sensing, and closed-loop control in precision irrigation. In particular, the development of agro-hydrological models that balance computing speed versus solution details and accuracy: (d) The use of state and parameter estimation approaches, through field measurements, to obtain soil moisture levels accurately; and (e) decision support systems to administer water and nutrient needs for optimum yields of agricultural products.     

Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.