Scattering of electromagnetic waves by a radially inhomogeneous magnetoplasma moving along its axis

The scattering of an obliquely incident linearly polarized plane electromagnetic wave by a radially inhomogeneous lossless cold magnetoplasma cylinder of infinite extent moving uniformly along its axis is studied for the case of the Gaussian electron density profile. The angular variation of the differential cross section for a range of plasma velocities has been computed by using two independent approaches, the two-point boundary-value method and the multi-sheet technique.     

Partial error tolerance for bit-plane FIR filter architecture

Whereas some applications require correct computation many others do not. A large domain where perfect functional performance is not always required is multimedia and DSP systems. Relaxing the requirement of 100% correctness for devices and interconnections may dramatically reduce costs of manufacturing, verification, and testing. The goal of this paper is to develop a method for trading computational correctness for an additional chip area involved by fault-tolerance implementation. The method is demonstrated for the BP array in the following way: only the most significant bits of the output word are made fault-tolerant. By introducing the concept of partially error-tolerant BP array, designers achieve one more degree of tradeoff freedom. Formal definitions of the proposed terms are given. A mathematical path based on transitive closure that generates an error significance map for the BP array is proposed. The design tradeoff is demonstrated through FPGA implementation. The achieved area savings are presented as a function of a number of most significant fault-tolerant bits.     

Determination of corrosion rate of orthodontic wires based on nickel‐titanium alloy in artificial saliva

The goal of this study was to determine corrosion behavior of three orthodontic wires based on nickel‐titanium alloy (NiTi) in artificial saliva at temperature of 37 °C as function of immersion time. Following orthodontic wires were used: uncoated (NiTi), rhodium coated (Rh NiTi) and nitrified (N NiTi) orthodontic wires. Corrosion of investigated orthodontic wires were monitored by measuring of Ni²⁺ and Ti⁴⁺ ions released in artificial saliva by inductively coupled plasma‐optical emission spectroscopy (ICP‐OES) after 3, 7, 14, 21 and 28 days of immersion. Obtained results indicate that corrosion reaction of the NiTi wires in artificial saliva follows the parabolic rate law. According to the obtained values of parabolic corrosion rate constants, corrosion susceptibility of orthodontic wires decreases in the following order: Rh NiTi wire (K_p = 2.48 μg²/cm⁴ h) > NiTi wire (K_p = 1.6 × 10^–3 μg²/cm⁴ h) > N NiTi wire (K_p = 6.0 × 10^–4 μg²/cm⁴ h). These results indicate that in comparison with uncoated NiTi wire, rhodium coating significantly increases corrosion susceptibility, while nitrification effectively suppresses the release of Ni²⁺ and Ti⁴⁺ ions.     

Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads

Silicon carbide (SiC) ceramics is a material with increasing use, due to its excellent mechanical properties, especially high hardness. In order to integrate this material into design process, we need to know its hardness as precise as possible. The Knoop hardness number (HK) is calculated using the expression: HK = α·F/d², where F is the applied load, d is the long diagonal of the resulting 1₀indentation and a is the Knoop indenter geometrical constant. In this paper, the Knoop hardness of SiC ceramics was measured in the applied load range from 4.9 to 98.07 N. For some materials measured “apparent” hardness value decreases with increasing applied test load (normal indentation size effect – ISE), while for some materials measured “apparent” hardness increases with increasing applied test load (reverse indentation size effect – RISE). Obtained results show the measured hardness exhibits the ISE. In the literature several models are given for the phenomenon explanation. We used the following models: Meyer's law (F = K·dⁿ), proportional specimen resistance – PSR (F = a₁·d + a₂·d²) and modified proportional specimen resistance – MPSR model (F = a₀ + a₁·d + a₂·d²). Results of regression analysis for all applied models show they can all be used for ISE analysis. “True” hardness was determined based on the PSR and MPSR model (HK_T = α·a₂). The obtained results were similar. If the specimen surface is carefully prepared and the range of loads is wide, the a₀ coefficient from MPSR model reaches small values and can be excluded. Therefore, for the calculation of SiC ceramics Knoop hardness, the simpler model (PSR) can be used.     

Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram

A phase diagram of the Bi-Ge-Sb ternary system was investigated experimentally by differential thermal analysis (DTA), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray powder diffraction (XRD) methods and theoretically by the CALPHAD method. The liquidus projection; invariant equilibria; and three vertical sections, Sb-Bi_0.5Ge_0.5, Ge-Bi_0.5Sb_0.5, and Bi-Ge_0.5Sb_0.5, as well as isothermal sections at 773 K and 373 K (500 °C and 100 °C), were predicted using optimized thermodynamic parameters for constitutive binary systems from the literature. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Predicted isothermal sections at 773 K and 373 K (500 °C and 100 °C) were compared with the results of the SEM-EDS and XRD analysis from this work. In both cases, good agreement between the extrapolated phase diagram and experimental results was obtained. Alloys from the three studied vertical sections were additionally analyzed using the Brinell hardness test.     

Relationship between the ambiguity function coordinate transformations and the fractional Fourier transform

It has been shown that the fractional Fourier transform, recently very intensively investigated in mathematics, quantum mechanics, optics and signal processing, can be obtained as a special case of the earlier introduced linear coordinate transformations of the ambiguity function or Wigner distribution. Some applications of the generalized fractional transform on the time-frequency analysis are presented.     

An indirect method for the detection of changes in power network configuration

This paper presents an indirect procedure for determination of power network topology. The procedure applies the methods of state and parameter estimation, using redundant and noisy measurements, and a power system model in the steady state for some known basic network topology. Detection of changes in a network topology related to a basic topology is done by monitoring a suitably selected performance index during the process of static state estimation, while the location of changes requires additional criteria. The paper describes the development of a mathematical algorithm and gives some simulation results obtained on a real power network.     

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO₂ (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO₂ and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (E_g) and, consequently, to investigate changes in the E_g value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO₂-based materials with antimicrobial properties that could be used in numerous green technology applications.     

AROMA COMPOUNDS AS MARKERS OF WINE QUALITY IN THE CASE OF MALVAZIJA ISTARSKA YOUNG WINE

ABSTRACT

In order to investigate the relationship between sensory and gas chromatographic analysis data, and to establish if particular aroma compounds could be used as Malvazija istarska young wine quality markers, 30 samples of Malvazija istarska young wine were subjected to sensory evaluation and gas chromatographic analysis of aroma compounds. Linear regression and principal component analysis were applied in order to establish the relations between sensory evaluation scores and aroma compound concentrations in corresponding wines. The most important contributors to the characterization and differentiation of wines evaluated with higher sensory evaluation scores were isoamyl acetate, ethyl hexanoate, ethyl octanoate, ethyl decanoate, hexanoic acid, octanoic acid and decanoic acid. On the other hand, wines evaluated with lower sensory evaluation scores were characterized and differentiated by higher amounts of isoamyl alcohol and isobutanol. Mentioned esters and acids were also found to be the most important variables for the classification of these wines according to quality using stepwise linear discriminant analysis (SLDA). The evaluation of the SLDA model was performed by cross‐validation, obtaining an average percentage of correct classification of 100.0%, and of correct prediction of 89.3%. The results of this investigation suggest that above‐mentioned esters, acids and alcohols could be used as markers of Malvazija istarska young wine quality.

PRACTICAL APPLICATIONS

Wine aroma is one of the most important parameters responsible for its quality, and hence for consumer acceptance. Sensory evaluation is the most common technique for controlling the organoleptic quality of wine, but it is not always feasible, since it requires specific conditions, and a group of trained expert tasters that can only assess a relatively small number of wine samples for a day. Moreover, the subjectivity of panelists can affect the evaluation in a great measure. The approach proposed in this work suggests the use of a nonsubjective instrumental technique such as gas chromatography for the analysis of volatile aroma compounds as a complementary tool for wine quality control able to predict, confirm or to correct the results of Malvazija istarska young wine sensory evaluation. Although this model is yet far from being practically implemented, information obtained could be used as a starting ground. Moreover, it was assumed that the approach proposed in this work is likely to be applied successfully on the differentiation and classification of other types of wine according to quality.     

Neural-fuzzy optimization of thick composites curing process

This article addresses the optimization of curing process for thick composite laminates. The proposed methodology aims at the evaluation of the thermal cycle promoting a desired evolution of the degree of cure inside the material. At the same time, temperature overshooting as well as excessive temperature and cure degree gradient through the thickness of the material are prevented. The developed approach is based on the integrated application of artificial neural networks and a fuzzy logic controller. The neural networks promptly predict the behavior of composite material during curing process, while the fuzzy logic controller continuously and opportunely adjusts the proper variations on the imposed thermal cycle. The results highlighted the efficiency of the method in comparison with the cure profiles dictated by the material suppliers. For thick laminates, a reduction of 35% of cure time and improvements of approximately 10% of temperature overshooting was obtained compared to conventional curing cycles. The method was validated by experimental tests.