DNA damage by PAH and repair in a marine sponge

The sponge Tethya lyncurium from the Northern Adriatic has been used as an experimental species.A method is outlined for preparation of DNA which yields a highly purified DNA with a double-strand (ds) molecular weight of 25 M-dalton between single-strand (ss) breaks, which when properly damaged can be cut opposite to ss-breaks with nuclease s₁. The molecular weights of the resulting ds-DNA pieces and their distribution has been evaluated by electron microscope photographs.Sponges exposed to benzo[a]pyrene (BaP) in the dark only incorporate BaP-derivatives (BaPD) in small amounts, if any. However, in the presence of light, derivatization to BaP derivatives enables effective coupling to occur, as shown previously (R. K. Zahn et al., 1981). Sponges were exposed to radiolabeled BaP in the presence of light. Coupling of BaPD to the DNA as well as the induction of ss-breaks were measured.Light-mediated coupling is concentration dependent from 0.01 – 20 ppb BaP with a correlation coefficient of r = 0.84.Under conditions of possible repair, ss-breaks completely disappear from sponge DNA in the course of three weeks while a substantial fraction of the BaP derivatives persists.Double label experiments show that substantial DNA synthesis occurs during this time. Pollution causes a decrease of the molecular weight of unnicked DNA, re-incubation in clean water an increase. A DNA species of 24 M-dalton seems to play a critical role. If its percentage in the DNA population drops below a critical level, recovery is not longer possible. DNA damage by PAH and repair in sponges seems to differ from that of most eucaryotes.     

Effects of filter concatenation for directly modulated transmissionlasers at 2.5 and 10 Gb/s

We report computer simulation results of the effects on optical signal quality of passage through a cascade of wavelength division multiplexing (WDM) filters-multiplexers and demultiplexers-for directly modulated lasers with different chirp characteristics. In particular, lasers with transient or adiabatic chirp characteristics at 2.5 Gb/s and 10 Gb/s are investigated, and we find clear differences between the laser types with respect to filter concatenation effects. Filters with an optical bandwidth suitable for a 200-GHz channel-spacing system are considered, and we evaluate the system behavior as a function of laser frequency offset for a fixed number of filters. The reference network architecture used for the simulations is an optically transparent metropolitan scale network in which the WDM signals may be demultiplexed and then multiplexed again at multiple optical network elements. The signal quality is evaluated in terms of a distortion-induced eye-closure penalty as well as the excess attenuation or loss suffered. We find that transient chirp-dominated lasers show a generally symmetric distortion penalty response to laser frequency offset, whereas the response for adiabatic chirp dominated lasers is highly asymmetric. Furthermore, the extinction ratio for the latter class of lasers can be improved, in some cases, by the appropriate offset between laser and filter center frequencies     

Multicomponent mass transfer across water films during hydrocarbon gas injection

Understanding the dynamics of pore-scale multicomponent gas and oil mass transfer across water films during hydrocarbon gas injection in petroleum reservoirs is important in the design of tertiary oil recovery schemes at the field scale. The water films prevent oil and gas coming into direct contact and, for miscible gas injection, delay the onset of miscibility. We use a pore-scale model to describe the diffusion-controlled mass transfer through the water films. The following different processes are found: (i) rapid oil swelling which results in short times needed to rupture the water films shielding the oil, (ii) slow oil swelling resulting in very long water film rupture times and (iii) both oil swelling and oil shrinking. The rate of oil recovery and the way it is recovered (either by rupturing the water film or being vaporized into the displacing gas) is critically dependent upon the oil and gas compositions, the oil droplet size and the water film thickness. We show cases at the pore scale where the time for gas and oil to be brought into direct contact and reach equilibrium in the presence of water films during miscible gas displacement is so long that water-blocking will adversely affect oil recovery at the field scale.     

Cylindrical antennas with constant capacitive loading

Experimental and theoretical values of admittance are presented for a monopole antenna made in the form of a row of identical conducting, mutually insulated cylinders. The influence of the number of cylinders making monopoles of equal length and with equal total gapwidths between the cylinders is analysed. It was found that such antennas exhibit broadband properties similar to those of antennas with tapered capacitive loading.     

Performance of gold-coated titanium bipolar plates in unitized regenerative fuel cell operation

The corrosion of the carbon-based bipolar plate was studied under unitized regenerative fuel cell (URFC) operation conditions. At overpotentials higher than 2.0 V vs. normal hydrogen electrode (NHE), cell performance in the electrolyzer mode significantly decreases with time due to the increased ohmic resistance of the carbon-based bipolar plates. During fuel cell operation, the unit cell shows an ohmic resistance of approximately 0.15 Ω. After the operation in the electrolyzer mode, the ohmic resistance of the cell increases up to 1.24 Ω. The surface image of the carbon-based bipolar plate after water electrolysis reaction at 2.0 V shows a drastic corrosion at the contact area of the bipolar plate with the electrode. The corrosion of the rib in the flow-field increases the contact resistance between the electrode and the bipolar plate, which leads to the observed decrease in cell performance. A gold coating of 1 μm on the titanium bipolar plates is very effective in preventing titanium oxidation during the URFC operation. The ohmic resistance of the cells that are prepared with bare titanium and gold-deposited titanium bipolar plates is 0.40 Ω and 0.18 Ω, respectively. In fact, the gold coating serves as a barrier layer, which inhibits the formation of the passive layer on the surface of titanium-based bipolar plates. The cycling experiments in the fuel cell and in the electrolyzer mode indicate that the gold-coated titanium bipolar plates exhibit a stable performance.     

Test run of biodiesel in public transport system in Belgrade

The problems related to our strong dependency on fossil fuels, i.e. greenhouse effect, energy dependency, urban pollution, are of growing importance in recent years. European Union (EU) Action plan of 2003, which had originated from Kyoto Agreement, defined a strategy for substitution of 20% of conventional fuel with the alternative one by 2020. Proved advantages of biodiesel usage in the system of public transport of passengers, with regard to exhaust gases emission above all, have been the decisive determinants for the actual promotion of biodiesel as ecologically “clean” fuel, while its wider usage gives important contribution to sustainable development of cities. This paper presents results of biodiesel-test run in Belgrade, as a part of the project BIO-PEX, which relates to the usage of this alternative fuel in real operating conditions in urban public transport system, with special emphasis on technical, ecological and operational aspects of biofuel usage.