可编程逻辑器件指南

《EDN》杂志编辑出版的《PAL、PLD和FPGA指南》介绍各种结构的可编程逻辑器件供你今后设计时使用。从中可以看到在PAL、PLD和FPGA领域中哪些器件是新的,哪些已陈旧过时,哪些有所改进。     

站在十字路口的DRAM买方和卖方,何去何从?

DRAM供应商希望有朝一日一种产品大小规格能适应所有的应用要求,但各种各样的设备要求则与之相差甚远.DRAM用户也许更喜欢定制的芯片,但价格会格外昂贵.双方会在保持原则的同时作出足够的让步以达成顺利的交易么?     

Wide‐Area Strain Sensors based upon Graphene‐Polymer Composite Coatings Probed by Raman Spectroscopy

Functional graphene optical sensors are now viable due to the recent developments in hand‐held Raman spectroscopy and the chemical vapor deposition (CVD) of graphene films. Herein, the strain in graphene/poly (methyl methacrylate) sensor coatings is followed using Raman band shifts. The performance of an “ideal” mechanically‐exfoliated single crystal graphene flake is compared to a scalable CVD graphene film. The dry‐transferred mechanically exfoliated sample has no residual stresses, whereas the CVD sample is in compression following the solvent evaporation during its transfer. The behavior of the sensors under cyclic deformation shows an initial breakdown of the graphene‐polymer interface with the interface then stabilizing after several cycles. The Raman 2D band shift rates per unit strain of the exfoliated graphene are ≈35% higher than CVD graphene making the former more strain sensitive. However, for practical wide‐area applications, CVD graphene coatings are still viable candidates as a Raman system can be used to read the strain in any 5 μm diameter spot in the coating to an absolute accuracy of ≈0.01% strain and resolution of ≈27 microstrains (μs), which compares favorably to commercial photoelastic systems.     

Direct Determination of Energy Band Alignments of Ni/Al2O3/GaN MOS Structures Using Internal Photoemission Spectroscopy

The energy band alignments of Ni/Al₂O₃/GaN heterostructures have been explored by internal photoemission (IPE) and capacitance–voltage (CV) measurements. By performing IPE measurements at both reverse- and forward-bias conditions, the Ni/Al₂O₃ Schottky barrier is found to be 2.9 ± 0.1 eV with the presence of a strong image force lowering effect, while the Al₂O₃/GaN conduction-band offset is determined to be 2.2 ± 0.1 eV and is insensitive to oxide electrical field. CV-based flat-band voltage analysis has further been performed on samples with different oxide thicknesses, not only confirming the IPE-measured band alignment but also revealing the presence of 3.0 × 10¹² cm^-2 net positive charge at the Al₂O₃/GaN interface.     

Extending transmission bandwidth of air-core photonic bandgap fibers

Air-core photonic bandgap fibers offer many unique properties and are critical to many emerging applications. A notable property is the high nonlinear threshold which provides a foundation for applications at high peak powers. The strong interaction of light and air is also essential for a number of emerging applications, especially those based on nonlinear interactions and spectroscopy. For many of those applications, much wider transmission bandwidths are desired to accommodate a wider tuning range or the large number of optical wavelengths involved. Presently, air-core photonic bandgap fibers have a cladding of hexagonal lattice. The densely packed geometry of hexagonal stacking does not allow large nodes in the cladding, which would provide a further increase of photonic bandgaps. On the other hand, a photonic cladding with a square lattice can potentially provide much larger nodes and consequently wider bandgap. In this work, the potentials of much wider bandgap with square lattice cladding is theoretically studied and experimentally demonstrated.     

Nanoimprint lithography fabrication of waveguide-integrated optical gratings with inexpensive stamps

We demonstrate that a replica grating can be effectively used as an inexpensive stamp for nanoimprint lithography to pattern diffractive optical couplers integrated with planar optical waveguides. Imprinted grating patterns were integrated with silicon oxynitride waveguide films to be used as an evanescent wave sensor in the input grating-coupler configuration. An anti-adhesion layer using an inexpensive, two-step chemical functionalization was developed for the stamps. The stamps were able to withstand imprint temperatures ranging from 140 to 190 °C and high fidelity imprints were obtained. The groove pattern was integrated in waveguide films by etch transfer and light-coupling properties of gratings with 1.2 μm pitch were tested using a λ = 1.55 μm laser. Compared to etched silicon masters, replica optical gratings provide uniform pattern density over their entire surface with no unstructured regions, are inexpensive, and readily available for R&D use.     

Model-driven interoperability: engineering heterogeneous IoT systems

Interoperability remains a significant burden to the developers of Internet of Things systems. This is because resources and APIs are dynamically composed; they are highly heterogeneous in terms of their underlying communication technologies, protocols and data formats, and interoperability tools remain limited to enforcing standards-based approaches. In this paper, we propose model-based engineering methods to reduce the development effort towards ensuring that complex software systems interoperate with one another. Lightweight interoperability models can be specified in order to monitor and test the execution of running software so that interoperability problems can be quickly identified, and solutions put in place. A graphical model editor and testing tool are also presented to highlight how a visual model improves upon textual specifications. We show using case-studies from the FIWARE Future Internet Service domain that the software framework can support non-expert developers to address interoperability challenges.     

Investigation of novel anthracene‐bridged carbazoles as sensitizers and Co‐sensitizers for dye‐sensitized solar cells

Novel anthracene‐bridged carbazole organic dyes (designated ML4 and ML5) were synthesized using the Suzuki coupling reaction. These dyes were designed to be donor‐π‐conjugation‐acceptor sensitizers for dye‐sensitized solar cells, where the carbazole moiety acts as the donor, the anthracene moiety provides the π‐conjugation, and the cyano acrylic acid acts as the acceptor. Solar cells were fabricated with ML4 and ML5 alone with low power conversion efficiencies, but they were also used as co‐sensitizers with N719, improving the efficiency of the dye‐sensitized solar cells produced by ~3% and ~10%, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Experimental validation of a numerical model for heat transfer in vacuum glazing

Flat vacuum glazings consisting of a narrow evacuated space between two glass panes separated by an array of small support pillars have been fabricated. A guarded hot box calorimeter was designed and constructed to measure their heat transfer coefficients. Experimental measurements of temperatures and rates of heat transfer were found to be in very good agreement with those predicted using a developed finite element model. A method for determining the heat transfer coefficient of the evacuated gap has been established and comparisons are made between the measured and predicted glass surface temperature profiles of the exposed glass area and the heat transfer coefficients of the total glazing system in order to validated the model.     

Enantioselective two-phase hydrogenation of α-amino acid precursors with water soluble rhodium complexes of the cationic ligand (S,S)-2,4-bis[bis-(p-N,N,N-trimethylammoniumphenyl)phosphino]pentane, [CH3CH(P(p-C6H4NMe3)2CH2CH(P(p-C6H4NMe3)2CH3]4+

Rhodium complexes of the chiral cationic phosphine, (S,S)-2,4-bis[bis-(p-N,N.N-trimethyl-ammoniumphenyl)phosphino]pentane show excellent enantioselectivity for the hydrogenation of the DOPA precursor. (Z)-3-OMe,4-OAcC₆H₃CHC(COOH)(NHCOCH₃), and dehydro-phenylalanineacetamide as slurries in water. The catalytic reactions may be done in either a two-phase system with the catalyst in the aqueous phase or as a slurry in water provided the substrates have some water solubility. Enantioselectivities of as high as 95% can be obtained.