Static and free vibration analysis of variable-depth bridges of arbitrary alignments using the isoparametric spline finite strip method

The isoparametric spline finite strips for shells are employed to solve static and free vibration problems of variable-depth bridges of arbitrary alignments. Using this approach, a continuous bridge is first split up into substructures. Each substructure is modelled as an assemblage of isoparametric spline finite strips. Compatibility between substructures is ensured by suitable transformation at the interface. The presence of support diaphragms and bearings can also be accounted for. This method retains the computational efficiency of the spline finite strip method while it is much more flexible in geometric modelling. Solutions of this method are compared with other available solutions, and good agreement is observed.     

基于分布式弹簧-阻尼单元的桥头跳车动力荷载分析

对车辆桥头跳车问题,提出一种分布式弹簧-阻尼单元,该单元可以考虑车轮-路(桥)面接触长度和车轮的动力特性。基于此单元,结合车辆有限元动力分析,可对车辆上、下桥头错台时的竖向动力荷载进行定量研究。实例分析表明:①分布式弹簧-阻尼单元由于考虑了桥头跳车时车轮与桥面的接触长度,所得的车轮竖向动荷载比以往方法有所降低;②桥头错台跳车造成的竖向轮载冲击系数可能超过我国和美国桥梁规范设计值,需要引起重视;③下桥跳车时车轮动荷载降低,可能造成车轮脱空,影响行车安全性;④跳车动力荷载与行车速度、错台高度等因素有关,相关参数分析有利于对桥头错台高度和行车速度进行合理控制。     

Active learning structural model updating of a multisensory system based on Kriging method and Bayesian inference

Model updating techniques are often applied to calibrate the numerical models of bridges using structural health monitoring data. The updated models can facilitate damage assessment and prediction of responses under extreme loading conditions. Some researchers have adopted surrogate models, for example, Kriging approach, to reduce the computations, while others have quantified uncertainties with Bayesian inference. It is desirable to further improve the efficiency and robustness of the Kriging-based model updating approach and analytically evaluate its uncertainties. An active learning structural model updating method is proposed based on the Kriging method. The expected feasibility learning function is extended for model updating using a Bayesian objective function. The uncertainties can be quantified through a derived likelihood function. The case study for verification involves a multisensory vehicle-bridge system comprising only two sensors, with one installed on a vehicle parked temporarily on the bridge and another mounted directly on the bridge. The proposed algorithm is utilized for damage detection of two beams numerically and an aluminum model beam experimentally. The proposed method can achieve satisfactory accuracy in identifying damage with much less data, compared with the general Kriging model updating technique. Both the computation and instrumentation can be reduced for structural health monitoring and model updating.     

Irregular Characteristics of Bond Interface Formation in Ultrasonic Wire Wedge Bonding

The mechanism of ultrasonic wire wedge bonding, one of the die/chip interconnection methods, was investigated based on the characteristics of the ultrasonic wire bonding joints. The Al-1%Si wire of 25 μm in diameter was bonded on Au/Ni/Cu pad and the joint cross-section was analyzed by scanning electron microscopy （SEM） and energy-dispersive X-ray spectroscopy （EDX）. The results indicated that it is irregular for the ultrasonic bond formation, non-welded at the centre but joining well at the periphery, especially at the heel and toe of the joint. Furthermore, the diffusion and/or reaction at the cross-section interface are not clear at C-zone, while there exists a strip layer microstructure at P-zone, and the composition is 78.96 at. pct Al and 14.88 at. pct Ni, close to the Al3Ni intermetallic compound. All these observations are tentatively ascribed to the plastic flow enhanced by ultrasonic vibration and repeated cold deformation driving interdiffusion between AI and Ni at bond interface.     

Gold Nanocages: Engineering Their Structure for Biomedical Applications

The galvanic replacement reaction between a Ag template and HAuCl₄ in an aqueous solution transforms 30–200 nm Ag nanocubes into Au nanoboxes and nanocages (nanoboxes with porous walls). By controlling the molar ratio of Ag to HAuCl₄, the extinction peak of resultant structures can be continuously tuned from the blue (400 nm) to the near‐infrared (1200 nm) region of the electromagnetic spectrum. These hollow Au nanostructures are characterized by extraordinarily large cross‐sections for both absorption and scattering. Optical coherence tomography measurements indicate that the 36 nm nanocage has a scattering cross‐section of ～ 0.8 × 10^–15 m² and an absorption cross‐section of ～ 7.3 × 10^–15 m². The absorption cross‐section is more than five orders of magnitude larger than those of conventional organic dyes. Exposure of Au nanocages to a camera flash resulted in the melting and conversion of Au nanocages into spherical particles due to photothermal heating. Discrete‐dipole‐approximation calculations suggest that the magnitudes of both scattering and absorption cross‐sections of Au nanocages can be tailored by controlling their dimensions, as well as the thickness and porosity of their walls. This novel class of hollow nanostructures is expected to find use as both a contrast agent for optical imaging in early stage tumor detection and as a therapeutic agent for photothermal cancer treatment.     

Hybrid Subset Simulation method for reliability estimation of dynamical systems subject to stochastic excitation

A hybrid Subset Simulation approach is proposed for reliability estimation for general dynamical systems subject to stochastic excitation. This new stochastic simulation approach combines the advantages of the two previously proposed Subset Simulation methods, Subset Simulation with Markov Chain Monte Carlo (MCMC) algorithm and Subset Simulation with splitting. The new method employs the MCMC algorithm before reaching an intermediate failure level and splitting after reaching the level to exploit the causality of dynamical systems. The statistical properties of the failure probability estimators are derived. Two examples are presented to demonstrate the effectiveness of the new approach and to compare with the previous two Subset Simulation methods. The results show that the new method is robust to the choice of proposal distribution for the MCMC algorithm and to the intermediate failure events selected for Subset Simulation.     

Magnetic, ferroelectric and magnetoelectric coupling properties of Fe-implanted BaTiO3 films

BaTiO₃ (BTO) nano-films were implanted with iron by means of ion-implantation. According to the results of X-ray diffraction (XRD) and Raman analysis, all the films are single-phase with tetragonal structure. Upon the increase of Fe dosage, on one hand, there is a decrease in c/a ratio of the unit cells. As the grain size and surface roughness of the Fe-implanted films decrease, the well crystallized film was obtained. Consequently, both decreasing of coercivity and boosting of magnetization were observed simultaneously. With the decline of the grain size and surface roughness during thermal treatment of the Fe-implanted films, there is an improvement of Fe distribution across the BTO matrix. Consequently, there is a decrease of coercivity and rise of magnetization. Upon the decrease of Fe dosage, on the other, there is a decline in magnetization, and a ferroelectric hysteresis loop is observed at a Fe dosage of 3.0 × 10¹⁴ cm^− 2. Additionally, the dependence of capacitance on the applied magnetic field and its frequency were also monitored.     

Testbed for a scalable terabit optical local area network

The design of a fiber-optic local area network (LAN) demonstration system is described. A complete LAN system would consist of an array of 16 personal computers (PC's), where each PC has a network interface card (NIC) with a parallel fiber-optic datalink to a centralized optoelectronic switch core. The centralized core switches the data generated by 16 NIC's, up to 128 Gbit/s of bandwidth. The demonstrator is designed to scale to terabits of bandwidth by use of an emerging optoelectronic technology, i.e., integrated complementary metal-oxide semiconductor (CMOS) substrates with vertical-cavity surface-emitting laser (VCSEL) and photodetector optical input and output. A subset of the complete system was constructed and is operational. A prototype NIC card, with Motorola Optobus VCSEL transceivers for the optical datalinks, was constructed and is described. A prototype high-speed bipolar switch core, with statically configurable electrical positive-emitter coupled-logic 16 x 16 crossbar switches, CMOS field-programmable gate arrays, and Motorola Optobus transceivers, was constructed and is described. We successfully demonstrated the transmission of high-speed packetized data from one NIC card, through 10 m of parallel fiber ribbon and the centralized switch core, and back to the NIC. We summarize our experiences on the design and testing of our first demonstration system and our development toward a terabit switch core.     

Terabit optical local area networks for multiprocessing systems

The design of a scalable optical local area network formultiprocessing systems is described. Each workstation has aparallel-fiber-ribbon optical link to a centralized complementarymetal-oxide silicon (CMOS) switch core, implemented on a singlecompact printed circuit board (PCB). When the Motorola Optobusfiber technology is used, each workstation has a data bandwidth of 6.4Gbits/s to the core. A centralized switch core interconnecting 32workstations supports a 204-Gbit/s aggregate data bandwidth. Theswitch core is based on a conventional broadcast-and-selectarchitecture, implemented with parallel CMOS integrated circuits(IC's). The switch core scales well; by incorporation of theCMOS optoelectronic IC's with optical input-output, the electricalcore can be reduced to a single-chip optoelectronic IC with terabitcapacities. A prototype of an optoelectronic switch core has been fabricated and is described. The appeal of the architectureincludes its reliance on commercially available parallel-fibertechnology, its reliance on the well-developed markets of local areanetworks and networks of workstations, and its smooth scalability from the electrical to optical domains as technology matures.     

Adjuvant chemotherapy for patients with resected Dukes' C and high-risk B2 colon cancer with fluorouracil and levamisole

Carcinoma of the large bowel is the second leading cause of cancer mortality in Singapore. Although the great majority of patients are discovered at a stage where resection with curative intent is possible, almost half of the patients afflicted will die of it. The combination of 5-fluorouracil + levamisole used in patients with curatively resected high risk Dukes B2 and all Dukes' C colon cancers has been shown to reduce cancer recurrence rate and improve overall survival. Since 1990 adjuvant chemotherapy has been recommended for this group of patients. This report describes patients treated in Singapore, their toxicities and their outcome. A total of 341 patients were treated between 1990 and 1996. Treatment compliance was 71.8%. Toxicity was moderate with mainly grade 1-2 nausea and vomiting, diarrhoea, stomatitis, alopecia, and neutropenia. There was 1 treatment-related death. Median recurrence-free interval was 81 months and median survival was not reached at 90 months. This regimen is tolerable. Until further randomised reports comparing 5-fluorouracil + levamisole to other combinations are available, this combination chemotherapy is recommended to patients after surgical resection of the high risk Dukes' B2 and Dukes' C colon cancer to reduce cancer recurrence and improve overall survival.