浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

A new method for calculating loss coefficients [of power systems]

A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions, Line outage distribution factors (ODFs) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tenser analysis. The necessity of data normalization used in least squares and the evaluation of the slope of &thetas;_j versus PG_n is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A_jn-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to online dispatch applications     

Optimization of a schottky barrier mixer diode in the submillimeter wave region

We have designed a mixer Schottky barrier diode (SBD) for use in the submillimeter wave region with a structure optimized for minimum noise temperature. The dependence of mixer noise temperature upon thickness and doping density of the epitaxial layer and diode diameter of SBDs was simulated within the framework of existing theories. Special care was taken to formulate the SBD current-voltage and capacitance-voltage relations in a way that correctly describes the behavior of real SBDs.     

Comparison of protein adsorption isotherms and uptake rates in preparative cation-exchange materials

Adsorption isotherms and effective diffusivities of lysozyme in a set of six preparative cation-exchange stationary phases were determined from batch uptake data in a stirred vessel. Both a pore diffusion and a homogeneous diffusion model were used in estimating diffusivities, with the isotherms fitted to a non-Langmuirian analytical isotherm equation. The capacities inferred from the isotherms are found to be correlated with the surface area accessible to lysozyme, the effective surface concentrations obtained being in agreement with values measured by different methods in various non-chromatographic systems. The pore diffusivities show systematic trends with protein and salt concentration, and effects of pore size and connectivity are also evident. Some trends in the homogeneous diffusivities are quite different to those in the pore diffusivities, but these differences largely disappear when the homogeneous diffusivities are rescaled to account for adsorption equilibrium behavior. Additional information is required to elucidate further the mechanisms of coupled diffusion and adsorption in stationary phases.     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

HAR-sEMG: A Dataset for Human Activity Recognition on Lower-Limb sEMG

Knowledge and Information Systems - In the past decade, human activity recognition (HAR) has grown in popularity due to its applications in security and entertainment. As recent years have...     

A graph-based QoS prediction approach for web service recommendation

Applied Intelligence - With the development of the Internet, the recommendation based on Quality of Service(QoS) is proven to be an efficient way to deal with the ever-increasing web services in...     

A boundary element method for two dimensional linear elastic fracture analysis

A boundary element method is developed for the analysis of fractures in two-dimensional solids. The solids are assumed to be linearly elastic and isotropic, and both bounded and unbounded domains are treated. The development of the boundary integral equations exploits (as usual) Somigliana's identity, but a special manipulation is carried out to regularize certain integrals associated with the crack line. The resulting integral equations consist of the conventional ordinary boundary terms and two additional terms which can be identified as a distribution of concentrated forces and a distribution of dislocations along each crack line. The strategy for establishing the integral equations is first outlined in terms of real variables, after which complex variable techniques are adopted for the detailed development. In the numerical implementation of the formulation, the ordinary boundary integrals are treated with standard boundary element techniques, while a novel numerical procedure is developed to treat the crack line integrals. The resulting numerical procedure is used to solve several sample problems for both embedded and surface-breaking cracks, and it is shown that the technique is both accurate and efficient. The utility of the method for simulating curvilinear crack propagation is also demonstrated.