Prediction of residual stresses in high strength carbon steel pipe weld considering solid-state phase transformation effects

In this paper, prediction of axial and hoop residual stresses produced in high strength carbon steel pipe weld was made by employing a sequentially coupled 3-D thermal, metallurgical and mechanical FE model. Solid-state phase transformation during welding was incorporated into the FE model by allowing for volumetric changes and the associated changes in yield stress induced by austenitic and martensitic transformations. In the FE model, temperature-dependent thermo-physical and mechanical properties were considered, and phase transformation plasticity was also taken into account. The results showed the importance of incorporating solid-state phase transformation in the simulation of the pipe welding.     

RFID-initiated workflow control to facilitate patient safety and utilization efficiency in operation theater

Objective

To control the workflow for surgical patients, we in-cooperate radio-frequency identification (RFID) technology to develop a Patient Advancement Monitoring System (PAMS) in operation theater.

Methods

The web-based PAMS is designed to monitor the whole workflow for the handling of surgical patients. The system integrates multiple data entry ports Across the multi-functional surgical teams. Data are entered into the system through RFID, bar code, palm digital assistance (PDA), ultra-mobile personal computer (UMPC), or traditional keyboard at designated checkpoints. Active radio-frequency identification (RFID) tag can initiate data demonstration on the computer screens upon a patient's arrival at any particular checkpoint along the advancement pathway.

Results

The PAMS can manage the progress of operations, patient localization, identity verification, and peri-operative care. The workflow monitoring provides caregivers’ instant information sharing to enhance management efficiency.

Conclusion

RFID-initiate surgical workflow control is valuable to meet the safety, quality, efficiency requirements in operation theater.     

减少防撞雷达虚假目标的信号处理研究

从信号处理的角度分析了防撞雷达虚报警率、漏报警率偏高的原因,采用AR模型功率谱估计的Burg算法代替传统的FFT算法,并将粗神经网络应用于防撞雷达目标识别。仿真结果表明,此方法提高了雷达信号处理的准确度和目标识别率,能有效地降低漏报警、虚报警率。     

杜仲松脂醇二葡萄糖苷含量的近红外光谱检测研究

采用AntarisⅡ傅立叶变换红外光谱分析仪器(Thermo Nicolet)测定了9种杜仲的光谱数据,运用偏最小二乘法(PLS)和主成分分析回归(PCR)分别建立了杜仲中松脂醇二葡萄糖苷(PDG)含量与吸光度变量的近红外光谱定标模型,并对所建模型进行验证.结果表明,2种方法建立的模型精度都较高,其中模型的预测能力强弱指标SSE=2.8333,PRESS=7.2392,可见在近红外光谱下,PCR和PDG都适合对杜仲进行检测研究,这是本文的一个重要结果,为以后杜仲的指标检验研究提供了理论和实验依据:但是,PCR建立的(PDG)定标模型预测精度稍高于偏最小二乘法(PLS)建立的模型,所以文中只对PCR进行模型的建立,PLS方法对杜仲检测分析这个问题有待于以后的进一步讨论和研究.     

基于对数的NTC热敏电阻测温系统的设计

针对NTC热敏电阻阻值与温度(R-T)的非线性特性,为了提高测温精度,提出一种三阶对数公式法对R-T特性进行分段曲线拟合.该测温系统以三阶对数公式为基础进行了软硬件设计,实现了对船用柴油机的机油温度、冷却水温度的高精度测量.通过实验测试表明,在0～120℃温度范围内,采用该测温系统的测温误差小于±0.3℃.该测温系统已...     

基于个性化情境和项目类别的资源推荐研究

传统的协同过滤推荐技术没有考虑影响用户评分的用户情境信息,但最近研究发现用户个性化情境信息直接影响着用户评分,因此在传统的协同过滤技术基础上引入用户个性化情境后推荐效果有所提高。此外可以将用户个性化情境和项目类别相结合起来。先对项目进行分类,然后再确定用户在每个项目类别下的个性化情境,同一项目类别下所有项目的用户个性化情境是相同的。在为目标项目预测评分时,先确定目标项目所在的类别,进而确定计算目标项目预测评分所用到的用户个性化情境。实验结果表明,改进后的算法较Slope one有较大提高。     

Integration of topology and shape optimization for design of structural components

This paper presents an integrated approach that supports the topology optimization and CAD-based shape optimization. The main contribution of the paper is using the geometric reconstruction technique that is mathematically sound and error bounded for creating solid models of the topologically optimized structures with smooth geometric boundary. This geometric reconstruction method extends the integration to 3-D applications. In addition, commercial Computer-Aided Design (CAD), finite element analysis (FEA), optimization, and application software tools are incorporated to support the integrated optimization process. The integration is carried out by first converting the geometry of the topologically optimized structure into smooth and parametric B-spline curves and surfaces. The B-spline curves and surfaces are then imported into a parametric CAD environment to build solid models of the structure. The control point movements of the B-spline curves or surfaces are defined as design variables for shape optimization, in which CAD-based design velocity field computations, design sensitivity analysis (DSA), and nonlinear programming are performed. Both 2-D plane stress and 3-D solid examples are presented to demonstrate the proposed approach. Received January 27, 2000 Communicated by J. Sobieski     

Web上多层Client/Server数据库系统的设计与实现

文章探讨了当今处于Internet技术前沿的可用的远程数据库编程技术,并分析了Web上多层Client／Server数据库系统的原理和结构.提出了一种Web上多层Client／Server数据库系统的解决方案,详述了系统实现的具体方法,以及开发过程中所要解决的关键问题,并实现了主讲教师优秀教案远程参考系统.     

多主体系统的建模技术研究

为了有利于多主体系统的开发,目前急需一种系统建模技术来对系统复杂性进行行之有效的管理。由于面向对象的建模技术已经趋向成熟,该文在面向对象的建模方法的基础上阐述了一种面向主体的建模方法。该方法针对基于一种特定BDI结构的主体,它包括从内部观点建构信念、目标、计划模型（ 即所谓的BDI模型 ）和从外部观点建构单个主体模型和交互模型。而且,该方法也能容易地进行扩展并应用于其他结构的主体建模。文章对各个模型的建造作出了详细介绍。     

一种适合窄带网络多媒体教学的文件传输协议──NFTP的研究与实现

目前在网络环境下进行多媒体教学,网络速度是一个严重的瓶颈问题。在分析瓶颈产生的基础上,作者提出了一个新的文件传输协议──ＮＦＴＰ（Ｎａｒｒｏｗｂａｎｄ　Ｆｉｌｅ　Ｔｒａｎｓｆｅｒ　Ｐｒｏｔｏｃｏｌ窄带文件传输协议）,利用广播数据包方法解决多媒体教学中的速度问题,并设计了一组协议原语,用于协议的描述。