Casein Hydrolysate Fractions Act as Emulsifiers in Process Cheese

ABSTRACT: Degrees of hydrolysis and emulsifying activity of casein hydrolysates were the highest at 4 h hydrolysis. The oil-off values of the mixture of hydrolysate (H) or supernatant (S) and traditional emulsifier (T) were not significantly different from the control made with traditional emulsifier, except for S + T = 3:1. Two other samples made with hydrolysate or supernatant only (H or S) showed higher oil-off value than the others (p < 0.05). In flavor property, no difference was found between samples made with traditional emulsifier and those made with the mixture of hydrolysate or supernatant at the ratio of 3 to 1. Therefore, these results indicated that a mixture of the hydrolysate or supernatant and traditional emulsifier might replace a traditional emulsifier in process cheese manufacturing.     

A simple method for measuring the cell gap of a reflective twisted nematic LCD

A simple method is demonstrated for measuring the cell gap of reflective twisted nematic (RTN) liquid crystal (LC) cells. This method utilizes a single laser beam and crossed polarizer configuration such that Fabry-Perot effect and surface reflection are eliminated. Experimental results agree well with theory.     

Condom use: A self-efficacy model.

A survey of heterosexually active college students gathered information about condom use, self-efficacy (SE), outcome expectancies, sexual attitudes, peer group influences, AIDS knowledge, and a perceived vulnerability to AIDS. On the basis of A. Bandura's (1986) social-cognitive theory, a structural model with SE as the central mediator was formulated and evaluated with LISREL. This model explained 46% of the variance in condom use from judgments of SE and effects attributable to peers and 53% of the variance in SE from outcome expectancies and peer group influences. Sexual attitudes, AIDS knowledge, and perceived vulnerability did not predict condom use. Most students were well-informed about HIV transmission but reported not feeling at risk, even though many engaged in risky sexual behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A mixed design approach for probabilistic structural durability

In this paper, a mixed approach for probabilistic structural durability design of mechanical systems is proposed. In this approach, a deterministic design optimization that considers structural crack initiation and crack propagation lives at critical points of the structural component as design constraints is performed first. After an optimal design is obtained, a reliability analysis is performed to ascertain if the deterministic optimal design is reliable. If the probability of the failure of the deterministic optimal design is found to be acceptable, a reliability-based design approach that employs a set of interactive design steps, such as trade-off analysis and what-if study, is used to obtain a near-optimal design that is reliable with an affordable computational cost. A 3-D tracked vehicle roadarm is employed to demonstrate the feasibility of the proposed approach.     

Analysis and characterization of traveling-wave electrode in electroabsorption modulator for radio-on-fiber application

Comparing with a lumped electroabsorption modulator (EAM), we show the merits of a long EAM with traveling-wave electrode with high radio-frequency (RF) gain that could be used in high-frequency analog application. By terminating the RF output port with the characteristic impedance of 30 /spl Omega/, the device exhibited a large enhancement of 6 dB above 10 GHz in the electrical-to-optical response and a wide fractional bandwidth as estimated from simulation. In addition, an input impedance matching circuit of stub embedded on the device chip was found to be very effective for improving RF characteristics in the narrow band of frequency.     

Parasitic-aware RF circuit design and optimization

RF circuit synthesis techniques based on particle swarm optimization and adaptive simulated annealing with tunneling are described, and comparisons of parasitic-aware designs of an RF distributed amplifier and a nonlinear power amplifier are presented. Synthesized in 0.35-/spl mu/m digital CMOS using a single 3.3-V power supply, the designs provide an 8-dB gain and 8-GHz bandwidth for a four-stage distributed amplifier, and 1.2-W output power with 55% drain efficiency at 900 MHz for a three-stage power amplifier. A standard circuit simulator, HSPICE or SPECTRE, embedded in an optimization loop is used to evaluate cost functions. The proposed design and optimization methodology is computationally efficient and robust in searching complex multidimensional design spaces.     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.