Vacuum Vaporization in the System MgO-Cr2O3

The vaporization of the system MgO-Cr₂O₃ was studied in a vacuum of 10⁻⁵ torr (10⁻³N/m²) at 1500° to 1700°C using the Langmuir and Knudsen methods. It was found that the phases in the system vaporize nearly congruently and the logarithm of the vaporization coefficient, α, of MgCr₂O₄ increases linearly with increasing reciprocal temperature. Alpha tends to unity at a temperature near the melting point (2525±23°C). The additivity rule can be applied to the Langmuir vaporization rates on the basis of the surface area ratios of the phases in the 2-phase system MgO-Cr₂O₃. The enthalpies of vaporization of MgCr₂O₄ were 695.0 and 549.2 kcaVmol for activated and equilibrium processes, respectively.     

蛋白质组学方法分析不同苯酚浓度下菌株Acinetobacter sp．EDP3的应激机理

Strain EDP3 was isolated from an industrial-activated sludge. It belonged to the gamma group of Pro-teobacteria with an identity of 97.0% to Acinetobacter calcoaceticus according to the 16S rRNA gene sequences. It can tolerate up to 1000mg·L^-1 phenol at room temperature with a much longer lag phase. This indicates that higher phenol concentration has induced some physiological and genotypic changes in the bacterium. The aim of this study is, therefore, to investigate these responses to phenol concentration variations in strain EDP3. Proteome analysis is conducted by means of a two-dimensional polyacrylamide gel electrophoresis （2D PAGE） and matrix-assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS） was conducted to obtain a deeper insight into the adaptive responses inside the bacterium. Comparative analysis of the proteome profiles of strain EDP3. grown in 400mg·L^-1 and 1000mg·L^-1 phenol allowed us to identify that among all the proteins up-regulated under the higher phenol concentration, oxidative stress proteins were dominant. The synthesis of a heat shock protein, 60000 chaperonin GroEL, was also amplified. In addition, the expression of one membrane protein, adenosine 5＇-triphosphate （ATP）-binding cassette （ABC） type sugar transporter, was found up-regulated. The inhibition of adenosine 5＇-triphosphate （ATP） and RNA/protein synthesis was also observed.     

Effect of Post Weld Heat Treatment on Cryogenic Mechanical Properties of Electron Beam Welded Cast Inconel 718

Electron beam welding of pre-aged cast 718 produced a slender Laves phase, while welds from solutionized cast 718 exhibited a blocky Laves phase with an initial stage of δ precipitation and formation of γ′+γ″ strengtheners after post weld heat treatment (PWHT). The presence of primary strengthener and coarse Laves particles in PWHT weld may cause reduction of the micro-plastic zone ahead of a crack, leading to a significant decrease in Charpy impact toughness at 77 K (?196 °C).     

A computer-aided framework for the selection and sequencing of orientating devices for the vibratory bowl feeder

Correct part orientation has been the key to many successful automation applications, and often vibratory bowls were used. Traditionally, the design and tooling of the vibratory bowls are limited to a group of skilled experts. In this paper a feature-based framework for the automatic selection and sequencing of orientating devices is presented. A direct link between part representation and the selection and sequencing of modular orientating devices is provided by a spatial technique, in place of traditional CAD representation. Also described is the classification of a part's orientating features and classification of orientating devices. These two classifications are integrated into a knowledge-based system that will automatically generate sequences of modular orientating devices.     

Cost modelling for electrical interconnect design justification

It is vital, in this competitive global market, that a product be well designed with ease of assembly as well as low product cost and yet meet its functionality objectives. It is therefore essential that a tool be developed to estimate the manufacturing cost of the product during its conceptual design phase. In this paper, the development of cost models for electrical interconnect design is discussed. The cost models can be used by designers in estimating the manufacturing cost of their designs and selecting the design that is economical to produce and functionally, meets the required specifications.     

Performance of signal‐to‐noise ratio estimation for scanning electron microscope using autocorrelation Levinson–Durbin recursion model

A new technique to quantify signal‐to‐noise ratio (SNR) value of the scanning electron microscope (SEM) images is proposed. This technique is known as autocorrelation Levinson–Durbin recursion (ACLDR) model. To test the performance of this technique, the SEM image is corrupted with noise. The autocorrelation function of the original image and the noisy image are formed. The signal spectrum based on the autocorrelation function of image is formed. ACLDR is then used as an SNR estimator to quantify the signal spectrum of noisy image. The SNR values of the original image and the quantified image are calculated. The ACLDR is then compared with the three existing techniques, which are nearest neighbourhood, first‐order linear interpolation and nearest neighbourhood combined with first‐order linear interpolation. It is shown that ACLDR model is able to achieve higher accuracy in SNR estimation.     

Effects of poly‐γ‐glutamic acid on the physicochemical characteristics of skim milk yoghurt

The physicochemical and sensory properties of skim milk yoghurts containing poly‐γ‐glutamic acid (PGA) at different levels (0.0025, 0.005 and 0.01%) were evaluated. Addition of PGA up to 0.01% to reconstituted skim milk (11%, w/v) did not affect the growth of lactic acid bacteria or the development of titratable acidity in yoghurt, whereas full‐fat control yoghurt had reduced acid production. No changes were found in viable cell counts of PGA yoghurts during storage (4 weeks at 4 °C). The addition of PGA (0.005%) significantly decreased syneresis in skim milk yoghurt and did not cause any undesirable effects in sensory acceptability.     

含垂直裂纹的厚热障涂层的热稳定性及力学性能(英文)

采用循环热暴露及热震试验研究含或不含垂直裂纹的厚热障涂层的热稳定性和失效机制。先采用空气等离子喷涂技术在基体表面制备150μm厚的连接涂层,再在该涂层上采用空气等离子喷涂技术制备2000μm厚的热障涂层。含或不含垂直裂纹的热障涂层的粘附强度分别为24.7和11.0 MPa,表明含垂直裂纹的热障涂层的界面稳定性更高。循环热暴露及热震试验表明其热稳定性更高。含或不含垂直裂纹的热障涂层的硬度分别为6.6和5.3GPa,经循环热暴露试验后分别升高至9.5和5.5 GPa。实验表明上层涂层中垂直裂纹的存在有利于延长热障涂层高温环境的寿命。     

电沉积Zn-Ni合金镀层的组织及电化学性能

研究了Zn-Ni合金镀层的组成、相结构及其电化学性能之间的相互关系.采用X射线衍射仪和X射线能谱分析仪分别测定了Zn-Ni合金镀层的结构及成分组成.采用传统的中性盐雾试验和电化学溶出试验研究了系列Zn-Ni合金镀层的电化学行为.试验结果表明,Ni含量为13%～18%时的Zn-Ni合金镀层对钢基体具有最优的保护性能,这是由于此时的镀层具有单一的相结构,使其具有较低的自由能和较好的热力学稳定性所致.     

A Steam-Plasma Igniter for Aluminum Powder Combustion

High-temperature ignition is essential for the ignition and combustion of energetic metal fuels,including aluminum and magnesium particles which are protected by their highmelting-temperature oxides.A plasma torch characterized by an ultrahigh-temperature plasma plume fulfills such high-temperature ignition conditions.A new steam plasma igniter is designed and successfully validated by aluminum power ignition and combustion tests.The steam plasma rapidly stabilizes in both plasma and steam jet modes.Parametric investigation of the steam plasma jet is conducted in terms of arc strength.A high-speed camera and an oscilloscope method visualize the discharge characteristics,and optical emission spectroscopy measures the thermochemical properties of the plasma jet.The diatomic molecule OH fitting method,the Boltzmann plot method,and short exposure capturing with an intensified charge coupled device record the axial distributions of the rotational gas temperature,excitation temperature,and OH radical distribution,respectively.The excitation temperature at the nozzle tip is near 5500 K,and the gas temperature is 5400 K.