扁管承压能力的有限元分析

应用有限元分析方法，对相同周长、相同壁厚的扁管在直边段和圆弧半径的不同比值条件下与所能承受最大外压力的关系进行了分析．并对计算分析取得的数据进行拟和得到了扁管在直边段和圆弧半径的不同比值条件下能承受最大外压力的关系及经验公式．     

网络条件下的资本一般及其逻辑推演——利益、规则与标准

通过对资本一般概念的分析，结合资本一般的运动功能论述，认为在经济全球化和网络条件下，资本增值属性必然导致对规则和标准的争夺与控制，标准战是资本一般在新的经济社会形态下发展的必然逻辑结果。     

航天产品多源可靠性信息的收集与整理--建立可靠性信息数据库

航天产品可靠性信息的来源多样，可靠性信息的时间性、随机性、有价性、时效性和可追溯性等特征，决定了可靠性数据收集应满足真实性、连续性、完整性等基本要求。同时，对多源信息的收集应遵循先进行需求分析，再确定数据收集点并制定数据收集表格的程度进行。给出了信息的适用性准则和信息分类的三维模型。最后结合具体型号航天产品的可靠性工作的要求，给出了可靠性信息数据库系统的整体方案设计。     

Development of a simple model for batch and boundary information updation for a similar ship’s block model

In early 2000,large domestic shipyards introduced shipbuilding 3D computer-aided design (CAD) to the hull production design process to define manufacturing and assembly information.The production design process accounts for most of the man-hours (M/H) of the entire design process and is closely connected to yard production because designs must take into account the production schedule of the shipyard,the current state of the dock needed to mount the ship’s block,and supply information.Therefore,many shipyards are investigating the complete automation of the production design process to reduce the M/H for designers.However,these problems are still currently unresolved,and a clear direction is needed for research on the automatic design base of manufacturing rules,batches reflecting changed building specifications,batch updates of boundary information for hull members,and management of the hull model change history to automate the production design process.In this study,a process was developed to aid production design engineers in designing a new ship’s hull block model from that of a similar ship previously built,based on AVEVA Marine.An automation system that uses the similar ship’s hull block model is proposed to reduce M/H and human errors by the production design engineer.First,scheme files holding important information were constructed in a database to automatically update hull block model modifications.Second,for batch updates,the database’s table,including building specifications and the referential integrity of a relational database were compared.In particular,this study focused on reflecting the frequent modification of building specifications and regeneration of boundary information of the adjacent panel due to changes in a specific panel.Third,the rollback function is proposed in which the database (DB) is used to return to the previously designed panels.     

Integrating supercomputing clusters into education: a case study in biotechnology

The Journal of Supercomputing - The integration of a Supercomputer in the educational process improves student’s technological skills. The aim of the paper is to study the interaction between...     

宽厚板热处理生产线

介绍了宝钢目前正在引进建设4．8m宽厚板热处理线(包括无氧化辐射管加热辊底式淬火炉和压辊式淬火机)的设备特点。     

Nd_2(Fe_(0.9)Si_(0.1))_(14)B的中子衍射研究SCIEI

本文用中子衍射对Nd_2(Fe_(0.9)Si_(0.1))_(14)B在室温及77K进行了测量,用衍射峰的形状分析法进行了数据拟合。结果表明,在室温,Si择优占据4c,8j_1及16k_2晶位;Nd与Fe的磁矩平行于C轴排列。在77K,Si仍择优占据上述三个晶位。算得的Nd磁矩的方向偏离C轴37.8°。     

The application of thermal sprayed coatings for pig iron ingot molds

Molds made of gray cast iron for casting pig iron ingots are subjected to severe temperature fluctuations. The main life- limiting factor for mold damage is the formation of surface cracks arising from thermal fa-tigue. Various flame and plasma sprayed coatings were investigated to extend the life of these molds. Coating materials studied include plasma sprayed ceramic coatings with bond coats as well as flame sprayed oxidation- resistant alloy powders. The results of cyclic furnace tests from room temperature to 1100 °C in air, simulating the thermal cycle in casting, indicated that failure occurred along the interface between the bond coat and the gray iron substrate because of iron oxidation, and not at the interface between the ceramic top coat-ing and the bond coating for a superalloy substrate. The field test results indicated that plasma sprayed alumina coatings with 200 μm top coating thickness are the most promising materials for pig iron casting.     

热固型甲基丙烯酸酯真空浸渗剂发展概况

本文简述了真空浸渗剂的发展概况，着重介绍了其中的热固化浸渗剂及其组成和浸渗工艺。     

缓蚀-阻垢剂的现状与发展

本文阐述了绿色化学技术在水处理缓蚀阻垢剂中的应用，综述了水处理缓蚀剂和阻垢剂及复合型缓蚀阻垢剂的现状，并概述了水处理缓蚀阻垢剂的发展方向。