热焊弯管用钢板工艺探讨

在统计分析、正交多项式回归和模拟试验的基础上，建立了高精度的屈强比预报模型，并运用多元函数极值原理，求导极值点及相应的工艺参数，为优化工艺制度，提高热焊弯管用钢(L360-WG系列)性能合格率提供了定量依据。     

谈合理布局我国铝工业问题

文章分析了我国铝工业特别是电解铝工业布局的变化及其总布局战略思考的转变过程,并从铝工业特别是电解铝工业与合理开发利用我国能源资源 合理的铝工业链以及环保等方面的关系,论述了我国迫切需要统一思想,制定出一个科学合理的铝工业总体布局产业政策以及能保证其能正确实施的经济、法律手段。     

文本索引词项相对权重计算方法与应用

文本索引词权重计算方法决定了文本分类的准确率。该文提出一种文本索引词项相对权重计算方法,即文本索引词项权重根据索引词项在该文本中的出现频率与在整个文本空间出现的平均频率之间的相对值进行计算。该方法能有效地提高索引词对文本内容识别的准确性。     

Electrode pitting in resistance spot welding of aluminum alloy 5182

Electrode pitting was investigated in resistance spot welding of 1.5-mm-thick sheet aluminum alloy 5182 using a medium-frequency direct-current welder and electrodes with a tip face curvature radius of 50 mm and tip face diameter of 10 mm. Detailed investigation of the metallurgical interactions between the copper electrode and aluminum alloy sheet was carried out using scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) and X-ray diffraction (XRD). The results indicated that electrode degradation, which eventually leads to weld failure, proceeded in four basic steps: aluminum pickup, electrode alloying with aluminum, electrode tip face pitting, and cavitation. Since pitting and cavitation result from Al pickup and alloying, periodic electrode cleaning could extend electrode tip life by limiting the buildup of Al on the tip face. This work is part of the effort to improve electrode tip life in resistance spot welding of aluminum alloys for automotive applications.     

改造本钢265m2烧结机倒料线提高作业率

针对本钢 2× 2 65m2 烧结机成品矿输送流程设计不合理而导致的烧结机频繁停机 ,通过采取合理的改进措施 ,实现了不停机倒料线 ,有效地提高了烧结机作业率和烧结矿产量 ,同时 ,烧结矿质量也有所改善     

Metabolism of 6-chloro n-butyl phthalide in rat

6-Chloro n-butyl phthalide (CBP) was orally administered to healthy, male Wistar rats pretreated with or without 3-methylcholanthrene (3-MC) by a single dose of 150 mg/kg, and urine samples were collected for 0-24 h. The urine sample was hydrolyzed with beta-glucuronidase, extracted and concentrated for TMS derivatization, and analysed on a GC-MS system for identification of CBP metabolities. Mass spectral analysis suggests that 7 CBP metabolites were present in the urine sample, and similar metabolism patterns were viewed in rats with or without pretreatment with 3-MC. Four main metabolites of CBP in rat urine were identified as alpha-beta oxolate, beta-gamma oxolate, beta-hydroxylate and gamma-hydroxylate, based on their chromatographic and mass spectral properties. Two hydroxylates have been previously identified in CBP metabolism by rat liver microsomes. The other two metabolites with higher polarity were tentatively identified as dihydroxylation products on the n-butyl side chain by the mass spectra of their TMS derivatives. One minor metabolite was found by the isotopic effect of chlorine, but its specific structure was undetermined. The difference between in vivo and in vitro metabolic profiles of CBP is also discussed.     

面向对象机器翻译知识库IMT—KB的设计与实现

机器翻译知识库是机译系统的重要组成部分,针对传统机译知识库的不足之处,本文提出一种面向对象的机译知识体系结构,同时给出这种具有层次性和模块性机译知识库的存储组织和管理机制。     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

用COREX输出煤气生产直接还原铁

将Ｃｏｒｅｘ输出煤气用于直接还原铁（ＤＲＩ）的生产是该气体的最佳用途。该方案在技术上是可行的。其中ＣＯ２的脱除方法已成熟并有多种选择。据推断，煤气加热时不会产生严重析碳，所以不影响加热和还原。ＣＯ２脱除量大、产品碳含量高、还原速率下降及入口温度上升是还原工艺的主要特点。ＨＹＬⅢ工艺比Ｍｉｄｒｅｘ工艺更适于使用Ｃｏｒｅｘ输出煤气。用Ｃｏｒｅｘ输出煤气作还原气时能耗比使用天然气时高。