布帮鞋无浆贴合工艺技术

本工艺是对原有工艺的改进，突破了原有布帮鞋不能采用无浆贴合的局限性，对原有工艺中的不足有了很大的改进，提高了生产效率，改善了鞋子外观质量，增加了鞋子的美观性。     

DXDK-70型包装机常见故障分析处理

我公司使用天津华特DXDK-70型包装机4台，在生产中出现的主要问题及解决方法作了详尽阐述，以供同行探讨。     

Preparation and properties of nano-sized SnO2 powder

1　INTRODUCTIONSnO2isoneofthemainmaterialsusedingassensor.Becauseofthehumidityandgassensingfunction,itattractsmoreandmoreattentions.Butthepresentproblemishowtoimprovethestabilityandsensibilityofgassensor.Researchershavetakenmanymeasurestoresolvethisproble…     

APPLICATION OF COMPUTER NUMERICAL METHOD IN PORE STRUCTURE CALCULATION

This paper compares the results Of calculat-ing pore structure and graphing differential and integralpore size distribution by hand and Computer,and presents thatlagrangian interpolation uesd by calculating pore structure issuitable and reliable.     

THE STATISTICAL DISTRIBUTION OF EXTREME VALUES OF WAVE-CURRENT FORCES ACTING ON SLENDER CIRCULAR CYLINDER IN IRREGULAR WAVES

Based on model test,the statistical distribution of extreme values of wave-current in-line forces acting on vertical circular cylinder is analyzed in this paper.It is shownthat the results calculated by the simplified method,proposed by authors,agree well with the testdata;Weibull distribution is also adoptable in the region of high KC number, and the shapeparameter a and scale parameter β are related well with KC number respectively.     

VTI介质的AVO理论与应用研究

AVO（Amplitude Versus Offset)技术的研究已有30多年的发展历程，其中有起有落，近两年在国际上该技术的应用又日趋广泛，发展较快，在寻找隐蔽性和裂缝性油气藏方面，AVO具有其他方法不能替代的作用，本文通过对羊屋三维数据的处理，解释一体化的研究，发现VTI各向异性介质对动校正存在较大的时差影响，本次研究成功地应用VTI介质成像理论对该地区地震数据进行了时差校正，同时采用时频域球面发散和吸收补偿加地表一致性（炮点，接收点和炮检距项）反褶积较好的振幅和频率补偿结果，并实现了相对保持振幅的要求，通过此次处理，解释一体化研究，发现了一块具有第二类AVO特性的，在常规成像条件下无法识别的地质异常体。     

DIRECT RESONANCE OF TURBULENT BOUNDARY LAVER OVER COMPLIANT WALLS

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｉｎｇｏａｌｏｆｔｈｉｓｐａｐｅｒｉｓｔｏｅｘｐｌｏｒｅｔｈｅｐｏｓｓｉｂｉｌｉｔｙｔｏｌｅａｒｎｍｏｒｅａｂｏｕｔｔｈｅｍｅｃｈａｎｉｓｍｏｆｔｕｒｂｕｌｅｎｔｂｏｕｎｄａｒｙｌａｙｅｒｆｌｏｗｉｎｔｅｒａｃｔｉｏｎｓａｎｄｉｔｓｅｆｆｅｃｔｓｏｎｃｏｍｐｌｉａｎｔｗａｌｌｐｅｒｆｏｒｍａｎｃｅ．Ｔｈｅｒｅａｒｅｃｅｒｔａｉｎｐｒｅｒｅｑｕｉｓｉｔｅｃｏｎｄｉｔｉｏｎｓｔｏｆｕｒｔｈｅｒｔｈｅｓｔｕｄｙｏｎｔｈｅｍｅｃｈａｎｉｓｍ，ｉ．ｅ．ｔｈｅｃｏ…     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

混合Hermite-Lagrange插值之同时逼近

对于(-1,1)中的结点组{X_k}_(k=1)~n,记l_k(x)为相应的Lagrange插值基本多项式,又记A_n=‖∑(2-x~2-x_k~2)(1-x_k~2)~-1丨l_k(x)‖。对于f∈C_([-1,1)~q与r=[q+2/2],本文证明满足条件H_n(f,x_k)=f(x_k)(k=1,2,…,n),H_n~(s)(f,±1)=f~(s)(±1)(s=0,1,…,n-1)的n+2r-1次代数多项式H_n(f,x)有逼近性质H_n~(s)(f,x)-f~(s)(x)=(?)其中δ_n(x)=n~(-1)(1-x~2)~(1/2),△_n(x)=δ_n(x)+n~(-2).作为证明的重要工具,本文还对n次代数多项式P_n(x),建立了另一形式的Bernstein不等武:若 P_n(x)=O(1)δ_n~q(x)ω(δ_n(x)),则p_n~(S)(X)=O(1)δ_n~(q-2S)(X)ω(δ_n(X))△_n~s(X)。