DEPP functionally graded piezoceramics via micro-fabrication by co-extrusion

This paper introduces the Dual Electro/Piezo Property (DEPP) gradient technique via Micro-Fabrication through Co-eXtrusion (MFCX) which pairs a high displacement lead zirconate titanate (PZT) piezoceramic with a high permittivity barium titanate (BT) dielectric. By grading with this material combination spatially across an actuator, the electric field is concentrated in the more active region for improved efficiency, higher displacements, and complex motions. To aid in synthesis and analysis of any gradient profile, compositional maps are provided for key material properties (density, stiffness, permittivity, and piezoelectric coefficients). The DEPP technique was validated, independent of the MFCX process, by powder pressing a conventional bimodal gradient beam which demonstrated through experiments high displacement capabilities at lower driving potentials than comparable functionally graded piezoceramic actuators. For more complex gradients, the MFCX process was adapted to the DEPP gradient technique and illustrated by the fabrication of a linearly graded prototype whose monolithic nature and gradual material variation significantly reduces internal stresses, improves reliability, and extends service lifetime.     

Effect of carrier screening on ZnO-based resistive switching memory devices

The carrier screening effect occurs commonly in dielectric materials. It reduces the electric potential gradient, thus negatively affecting the functionality of resistive random access memory (RRAM) devices. An Au/ZnO film/Al-doped ZnO device fabricated in this work exhibited no resistive switching (RS), which was attributed to the carrier screening effect. Therefore, annealing was used for alleviating the screening effect, significantly enhancing the RS property. In addition, different on/off ratios were obtained for various bias values, and the screening effect was accounted for by investigating electron transport mechanisms. Furthermore, different annealing temperatures were employed to modulate the free carrier concentration in ZnO films to alleviate the screening effect. The maximal on/off ratio reached 10⁵ at an annealing temperature of 600 °C, yielding the lowest number of free carriers and the weakest screening effect in ZnO films. This work investigates the screening effect in RS devices. The screening effect not only modulates the characteristics of memory devices but also provides insight into the mechanism of RS in these devices.

Open image in new window

     

Structural,magnetic and photocatalytic characterization of Bi<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>La<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> nanoparticles synthesized by thermal decomposition method

Single-phase La-substituted bismuth ferrite (Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\)) nanoparticles have been synthesized by thermal decomposition of a glyoxylate precursor. The crystal structure transition of BiFeO\(_{\mathbf {3}}\) from the rhombohedral (R3c) to the cubic \(\boldsymbol {Pm}\bar {\mathbf {3}}\boldsymbol {m}\) structure by La addition was confirmed by X-ray diffraction and infrared spectrometry methods. Furthermore, the Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\) nanoparticles showed a weak ferrimagnetism behaviour, while the magnetization increased from 0.18 to 0.48 emu g\(^{\mathbf {-1}}\) with La substitution. The Bi\(_{\boldsymbol {1-x}}\)La\(_{\boldsymbol {x}}\)FeO\(_{\mathbf {3}}\) nanoparticles exhibited strong absorption in the visible region with the optical band gap calculated from Tauc’s plot in the range of 2.19–2.15 eV. Furthermore, the effects of La substitution on the photodegradation of the methylene blue (MB) under visible light were also studied. The photodegradation of MB dye was enhanced from 64 to \(\sim \)99% with increasing La substitution from \(\boldsymbol {x =}\) 0 to 0.1 and then decreased to 8% for \(\boldsymbol {x =}\) 0.15.     

Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B₁₂ and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B₁₂ and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

Quantitative Analysis of the Degradation Behavior of Silicon Solar Cell Irradiated by 1 MeV Electron Beams Using Photocarrier Radiometry Combined with Lock-in Carrierography

Silicon solar cells with cover glass irradiated by 1 MeV electron beams at various fluences were investigated using photocarrier radiometry (PCR) combined with lock-in carrierography (LIC, spectrally gated dynamic photoluminescence). The minority carrier transport properties (i.e., minority carrier lifetime τ, diffusion coefficient D, surface recombination velocities S) and the degradation of these properties were studied using PCR. The relative damage coefficient obtained by LIC was consistent with the PCR measurement. The local series resistance of the solar cell before and after irradiation was characterized by LIC. The results showed that the series resistance increased with electron fluences.     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.     

Behavior of square concrete columns reinforced with Prefabricated Cage System

Behavior of normal strength concrete columns reinforced with a new reinforcement, termed Prefabricated Cage System (PCS) is investigated. A total of 16 small-scale PCS and rebar reinforced column specimens were constructed and tested under monotonic axial displacement. The experimental results indicate that the overall behavior of rebar and PCS reinforced specimens are comparable prior to achieving the peak column load. In general, PCS specimens are more ductile and absorb more energy than similar rebar specimens after the peak load is reached. The effect of different parameters, such as the steel tube thickness, number of longitudinal reinforcements, transverse steel spacing, and crossties on the specimens’ strength and deformation capacity are investigated. A confined concrete model is proposed and used to predict the load–displacement response. The theoretical load–displacement relations obtained from the proposed model are compared with those obtained from the Mander et al. (J Struct Eng 114(8):1804–1826, 1988) confinement model.     

Eliminating Synaptic Ribbons from Rods and Cones Halves the Releasable Vesicle Pool and Slows Down Replenishment

Glutamate release from rod and cone photoreceptor cells involves presynaptic ribbons composed largely of the protein RIBEYE. To examine roles of ribbons in rods and cones, we studied mice in which GCamP3 replaced the B-domain of RIBEYE. We discovered that ribbons were absent from rods and cones of both knock-in mice possessing GCamP3 and conditional RIBEYE knockout mice. The mice lacking ribbons showed reduced temporal resolution and contrast sensitivity assessed with optomotor reflexes. ERG recordings showed 50% reduction in scotopic and photopic b-waves. The readily releasable pool (RRP) of vesicles in rods and cones measured using glutamate transporter anion currents (I_A(glu)) was also halved. We also studied the release from cones by stimulating them optogenetically with ChannelRhodopsin2 (ChR2) while recording postsynaptic currents in horizontal cells. Recovery of the release from paired pulse depression was twofold slower in the rods and cones lacking ribbons. The release from rods at −40 mV in darkness involves regularly spaced multivesicular fusion events. While the regular pattern of release remained in the rods lacking ribbons, the number of vesicles comprising each multivesicular event was halved. Our results support conclusions that synaptic ribbons in rods and cones expand the RRP, speed up vesicle replenishment, and augment some forms of multivesicular release. Slower replenishment and a smaller RRP in photoreceptors lacking ribbons may contribute to diminished temporal frequency responses and weaker contrast sensitivity.     

Optimization of abrasive water jet cutting of ductile materials

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials: AISI 4340 (high strength low alloy steel, hardened to 49HRc) and Aluminum 2219. Analysis of Variance (ANOVA) was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.     

DCAF: An MPEG-21 Dynamic Content Adaptation Framework

Universal Multimedia Access aims at providing a gratifying end user-experience by either adapting the content, be it static or dynamic, to suit the usage environment or adapting the usage environment, be it client- or server-centric, to suit content. This paper presents our MPEG-21 Dynamic Content Adaptation Framework, acronym DCAF, which uses a fusion of Genetic Algorithms and Strength Pareto Optimality to adapt content in order to suit the usage environment.