Hypoxia in the Baltic Sea and basin-scale changes in phosphorus biogeochemistry

Deep-water oxygen concentrations in the Baltic Sea are influenced by eutrophication, but also by saltwater inflows from the North Sea. In the last two decades, only two major inflows have been recorded and the lack of major inflows is believed to have resulted in a long-term stagnation of the deepest bottom water. Analyzing data from 1970 to 2000 at the basin scale, we show that the estimated volume of water with oxygen, <2 mL L(-1), was actually at a minimum at the end of the longest so-called stagnation period on record. We also show that annual changes in dissolved inorganic phosphate water pools were positively correlated to the area of bottom covered by hypoxic water, but not to changes in total phosphorus load, thus addressing the legacy of eutrophication on a basinwide scale. The variations in phosphorus pools that have occurred during the past decades do not reflect any human action to reduce inputs. The long residence time and internally controlled variation of the large P pool in the Baltic Sea has important implications for management of both N and P inputs into this eutrophicated enclosed basin.     

Characterization of Cementitious Materials Exposed to Freezing and Thawing in Combination with Deicing Salts Using 3D Scans

Surface deterioration of concrete subjected to freezing and thawing in combination with deicing salts is one of the most important factors determining the durability of concrete infrastructure in cold climates. The freeze–thaw deicing salt (FTDS) resistance of cementitious materials can be determined by the capillary suction of de-icing chemicals and freeze–thaw (CDF) test. Specimens are subjected to repeated freeze–thaw cycles with simultaneous addition of deicing salt and the amount of material scaled off near the surface is determined. For concretes with adequate FTDS resistance, this test method works very well. However, specimens with unknown performance often experience increased edge scaling. This leads to a falsification of results and consequently to an underestimation of the actual freeze–thaw resistance. In materials research, however, concretes with high levels of surface deterioration are studied in order to investigate various factors of influence on the freeze–thaw resistance of concretes in a targeted manner. This article presents a novel methodology that delivers new information regarding surface deterioration of CDF samples using high-resolution 3D scan data. Change of volume is used to support deterioration results of the standard CDF methodology. Increase of surface area is used to estimate change in roughness of samples.     

25th Anniversary Article: A Soft Future: From Robots and Sensor Skin to Energy Harvesters

Scientists are exploring elastic and soft forms of robots, electronic skin and energy harvesters, dreaming to mimic nature and to enable novel applications in wide fields, from consumer and mobile appliances to biomedical systems, sports and healthcare. All conceivable classes of materials with a wide range of mechanical, physical and chemical properties are employed, from liquids and gels to organic and inorganic solids. Functionalities never seen before are achieved. In this review we discuss soft robots which allow actuation with several degrees of freedom. We show that different actuation mechanisms lead to similar actuators, capable of complex and smooth movements in 3d space. We introduce latest research examples in sensor skin development and discuss ultraflexible electronic circuits, light emitting diodes and solar cells as examples. Additional functionalities of sensor skin, such as visual sensors inspired by animal eyes, camouflage, self‐cleaning and healing and on‐skin energy storage and generation are briefly reviewed. Finally, we discuss a paradigm change in energy harvesting, away from hard energy generators to soft ones based on dielectric elastomers. Such systems are shown to work with high energy of conversion, making them potentially interesting for harvesting mechanical energy from human gait, winds and ocean waves.     

Rotary Blanking ‐ a New Manufacturing Process

Rotary blanking is a method of blanking and punching with rotating tools whereby the cutting tools are fixed to a pair of rollers performing a continuous blanking operation on a strip of sheet metal. The purpose of this paper is to outline the determining conditions under which the rotary blanking process takes place and to discuss advantages, restrictions, applications and optimization of this technology.     

Characterizing biofuel combustion with patterns of real-time emission data (PaRTED)

Emission properties and quantities from combustion sources can vary significantly during operation, and this characteristic variability is hidden in the traditional presentation of emission test averages. As a complement to the emission test averages, we introduce the notion of statistical pattern analysis to characterize temporal fluctuations in emissions, using cluster analysis and frequency plots. We demonstrate this approach by comparing emissions from traditional and improved wood-burning cookstoves under in-field conditions, and also to contrast laboratory and in-field cookstove performance. Compared with traditional cookstoves, improved cookstoves eliminate emissions that occur at low combustion efficiency. For cookstoves where the only improvement is an insulated combustion chamber, this change results in emission of more light-absorbing (black) particles. When a chimney is added, the stoves produce more black particles but also have reduced emission factors. Laboratory tests give different results than in-field tests, because they fail to reproduce a significant fraction of low-efficiency events, spikes in particulate matter (PM) emissions, and less-absorbing particles. These conditions should be isolated and replicated in future laboratory testing protocols to ensure that stove designs are relevant to in-use operation.     

Highly efficient enzyme-functionalized porous zirconia microtubes for bacteria filtration

In contrast to polymer membranes, ceramic membranes offer considerable advantages for safe drinking water provision due to their excellent chemical, thermal, and mechanical endurance. In this study, porous ceramic microtubes made of yttria stabilized zirconia (YSZ) are presented, which are conditioned for bacteria filtration by immobilizing lysozyme as an antibacterial enzyme. In accordance with determined membrane pore sizes of the nonfunctionalized microtube of ≤200 nm, log reduction values (LRV) of nearly 3 (i.e., bacterial retention of 99.9%) were obtained for bacterial retention studies using gram-positive model bacterium Micrococcus luteus. Immobilization studies of lysozyme on the membrane surface reveal an up to six times higher lysozyme loading for the covalent immobilization route as compared to unspecific immobilization. Antibacterial activity of lysozyme-functionalized microtubes was assessed by qualitative agar plate test using Micrococcus luteus as substrate showing that both the unspecific and the covalent lysozyme immobilization enhance the microtubes' antibacterial properties. Quantification of the enzyme activity at flow conditions by photometric assays reveals that the enzyme activities of lysozyme-functionalized microtubes depend strongly on applied flow rates. Intracapillary feeding of bacteria solution and higher flow rates lead to reduced enzyme activities. In consideration of different applied flow rates in the range of 0.2-0.5 mL/min, the total lysozyme activity increases by a factor of 2 for the covalent immobilization route as compared to the unspecific binding. Lysozyme leaching experiments at flow conditions for 1 h show a significant higher amount of washed-out lysozyme (factor 1.7-3.4) for the unspecific immobilization route when compared to the covalent route where the initial level of antibacterial effectiveness could be achieved by reimmobilization with lysozyme. The presented platform is highly promising for sustainable bacteria filtration.     

The social bookmark and publication management system bibsonomy

Social resource sharing systems are central elements of the Web 2.0 and use the same kind of lightweight knowledge representation, called folksonomy. Their large user communities and ever-growing networks of user-generated content have made them an attractive object of investigation for researchers from different disciplines like Social Network Analysis, Data Mining, Information Retrieval or Knowledge Discovery. In this paper, we summarize and extend our work on different aspects of this branch of Web 2.0 research, demonstrated and evaluated within our own social bookmark and publication sharing system BibSonomy, which is currently among the three most popular systems of its kind. We structure this presentation along the different interaction phases of a user with our system, coupling the relevant research questions of each phase with the corresponding implementation issues. This approach reveals in a systematic fashion important aspects and results of the broad bandwidth of folksonomy research like capturing of emergent semantics, spam detection, ranking algorithms, analogies to search engine log data, personalized tag recommendations and information extraction techniques. We conclude that when integrating a real-life application like BibSonomy into research, certain constraints have to be considered; but in general, the tight interplay between our scientific work and the running system has made BibSonomy a valuable platform for demonstrating and evaluating Web 2.0 research.     

Aromatic volatile organic compounds absorption with phenyl-based deep eutectic solvents: A molecular thermodynamics and dynamics study

The suitability of phenyl-based deep eutectic solvents (DESs) as absorbents for toluene absorption was investigated by means of thermodynamic modeling and molecular dynamics (MD). The thermodynamic models perturbed-chain statistical associating fluid theory (PC-SAFT) and conductor-like screening model for real solvents (COSMO-RS) were used to predict the vapor–liquid equilibrium of DES–toluene systems. PC-SAFT yielded quantitative results even without using any binary fitting parameters. Among the five DESs studied in this work, [TEBAC][PhOH] consisting of triethyl benzyl ammonium chloride (TEBAC) and phenol (PhOH), was considered as the most suitable absorbent. Systems with [TEBAC][PhOH] had lowest equilibrium pressures of the considered DES–toluene mixtures, the best thermodynamic characteristics (i.e., Henry's law constant, excess enthalpy, Gibbs free energy of solvation of toluene), and the highest self-diffusion coefficient of toluene. The molecular-level mechanism was explored by MD simulations, indicating that [TEBAC][PhOH] has the strongest interaction of DES–toluene compared to the other DESs under study. This work provides guidance to rationally design novel DESs for efficient aromatic volatile organic compounds absorption.