Thermosolutal convection during directional solidification

During solidification of a binary alloy at constant velocity vertically upward, thermosolutal convection can occur if the solute rejected at the crystal-melt interface decreases the density of the melt. We assume that the crystal-melt interface remains planar and that the flow field is periodic in the horizontal direction. The time-dependent nonlinear differential equations for fluid flow, concentration, and temperature are solved numerically in two spatial dimensions for small Prandtl numbers and moderately large Schmidt numbers. For slow solidification velocities, the thermal field has an important stabilizing influence: near the onset of instability the flow is confined to the vicinity of the crystal-melt interface. Further, for slow velocities, as the concentration increases, the horizontal wavelength of the flow decreases rapidly — a phenomenon also indicated by linear stability analysis. The lateral in-homogeneity in solute concentration due to convection is obtained from the calculations. For a narrow range of solutal Rayleigh numbers and wavelengths, the flow is periodic in time. Formerly with the Mathematical Analysis Division, Center for Applied Mathematics, National Bureau of Standards, Washington, DC 20234. This paper is based on a presentation made at the symposium “Fluid Flow at Solid-Liquid Interfaces” held at the fall meeting of the TMS-AIME in Philadelphia, PA on October 5, 1983 under the TMS-AIME Solidification Committee.     

Series Capacitor SF-6 Bypass Interrupter

Series capacitor banks on transmission lines ave two types of bypass switches; high-speed switches located on the insulated capacitor platforms for operation, and manually-operated line switches to isolate the bank for maintenance. Air break switches used for maintenance bypass on 345 kV series capacitors could not successfully transfer line current without heavy arcing. An SF-6 interrupter like that manufactured for transformer protection, was selected for a simple retrofit replacement.     

A Video Streaming System for Mobile Phones: Practice and Experience

This paper presents a case of video streaming system for mobile phone which has actually been implemented and deployed for commercial services in CDMA2000 1X cellular phone networks. As the computing environment and the network connection of cellular phones are significantly different from the wired desktop environment, the traditional desktop streaming method is not applicable. Therefore, a new architecture is required to suit the successfully streaming in the mobile phone environment. We have developed a very lightweight video player for use in mobile phone and the related authoring tool for the player. The streaming server has carefully been designed to provide high efficiency, reliability and scalability. Based on a specifically-designed suite of streaming protocol, the server employs an adaptive rate control mechanism which transmits the media packets appropriately into the network according to the change in network bandwidth.Hojung Cha is currently a professor in computer science at Yonsei University, Seoul, Korea. His research interests include multimedia computing system, multimedia communication networks, wireless and mobile communication systems and embedded system software. He received his B.S. and M.S. in computer engineering from Seoul National University, Korea, in 1985 and 1987, respectively. He received his Ph.D. in computer science from the University of Manchester, England, in 1991.Jongmin Lee is a Ph.D. candidiate in computer science at Yonsei University, Seoul, Korea. His research interests include wireless multimedia system, QoS architecture, multimedia communication networks. He received his B.S. and M.S. in computer science from Kwangwoon University in 1999 and 2001, respectively.Jongho Nang is a professor in the Department of Computer Science at Sogang University. He received his B.S. degree from Sogang University, Korea, in 1986 and M.S. and Ph.D. degree from KAIST, in 1988 and in 1992, respectively. His research interests are in the field of multimedia systems, digital video library, and Internet technologies. He is a member of KISS, ACM, and IEEE.Sung-Yong Park is an associate professor in the Department of Computer Science at Sogang University, Seoul, Korea. He received his B.S. degree in computer science from Sogang University, and both the M.S. and Ph.D. degrees in computer science from Syracuse University. From 1987 to 1992, he worked for LG Electronics, Korea, as a research engineer. From 1998 to 1999, he was a research scientist at Telcordia Technologies (formerly Bellcore) where he developed network management software for optical switches. His research interests include high performance distributed computing and systems, operating systems, and multimedia.Jin-Hwan Jeong received the B.S. and M.S. degrees in computer science from Korea University, Seoul, Korea, in 1997, and 1999, respectively. He is currently in Ph.D. course at Korea University. His research interests include video processing for thin devices, multimedia streaming and operating systems.Chuck Yoo received the B.S. degree in electronics engineering from Seoul National University, Seoul, Korea and the M.S. and Ph.D. in computer science in University of Michigan. He worked as a researcher in Sun Microsystems Lab. from 1990 to 1995. He joined the Computer Science and Enginnering Department, Korea University, Seoul, Korea in 1995, where he is currently a professor. His research interests include high performance network, multimedia streaming, and operating systems.Jin-Young Choi received the B.S. degree from Seoul National University, Seoul, Korea, in 1982, the M.S. degree from Drexel University in 1986, and the Ph.D. degree from University of Pennsylvania, in 1993. He is currently a professor of Computer Science and Engineering Department, Korea University, Seoul, Korea. His current research interests are in real-time computing, formal methods, programming languages, process algebras, security, software engineering, and protocol engineering.     

Dispersion and thermal conductivity of carbon nanotube composites

A mechanical method was used to shorten carbon nanotubes (CNTs) for improving dispersion without reducing their thermal conductivity. Single walled carbon nanotubes (SWCNTs) were mechanically cut to produce short and open-ended fullerene pipes. These shortened SWCNTs were then used in polymer composites. Both atomic force microscopy and scanning electron microscopy characterizations suggested that nanotube shortening significantly improved CNT dispersion. Thermal conductivity of composites containing short CNTs were found to be much better than those containing pristine CNTs.     

运行中可编程的增益控制

可能的最大值时,ADC 能提供最精确的数字输出。但当传感器输出的变化达到几个数量级或在许多数据采集系统中你不知道用户将使用何种信号连到该系统的情况下,如何使电压摆幅量最大化呢?动态范围的实质在信号调理方面,最受关注的问题是使系统的动态范围最大化。然而,在分析信号路径时,动态范围(DR)这一术语经常被采用甚至滥用。相反,信噪比(SNR)是明确的采用相同方法和处于同样环境下测量出的信号与噪声电平之比。在一个可编程的增益放大器(PGA)中,放大器中的噪声和最大信号电24 位的测量分辨率能为你解决什么问题?答案是有非常多的应用…     

Modeling and analysis of thickness gradient and variations in vacuum‐assisted resin transfer molding process

As vacuum‐assisted resin transfer molding (VARTM) is being increasingly used in aerospace applications, the thickness gradient and variation issues are gaining more attention. Typically, thickness gradient and variations result from the infusion pressure gradient during the process and material variations. Pressure gradient is the driving force for resin flow and the main source of thickness variation. After infusion, an amount of pressure gradient is frozen into the preform, which primarily contributes to the thickness variation. This study investigates the mechanism of the thickness variation dynamic change during the infusion and relaxing/curing processes. A numerical model was developed to track the thickness change of the bagging film free surface. A time‐dependent permeability model as a function of compaction pressure was incorporated into an existing resin transfer molding (RTM) code for obtaining the initial conditions for relaxing/curing process. Control volume (CV) and volume of fluid (VOF) methods were combined to solve the free surface problem. Experiments were conducted to verify the simulation results. The proposed model was illustrated with a relatively complex part. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Enhanced Ionic/Electronic Transport in Nano‐TiO2/Sheared CNT Composite Electrode for Na+ Insertion‐based Hybrid Ion‐Capacitors

Ion‐insertion capacitors show promise to bridge the gap between supercapacitors of high power densities and batteries of high energy densities. While research efforts have primarily focused on Li⁺‐based capacitors (LICs), Na⁺‐based capacitors (SICs) are theoretically cheaper and more sustainable. Owing to the larger size of Na⁺ compared to Li⁺, finding high‐rate anode materials for SICs has been challenging. Herein, an SIC anode architecture is reported consisting of TiO₂ nanoparticles anchored on a sheared‐carbon nanotubes backbone (TiO₂/SCNT). The SCNT architecture provides advantages over other carbon architectures commonly used, such as reduced graphene oxide and CNT. In a half‐cell, the TiO₂/SCNT electrode shows a capacity of 267 mAh g^?1 at a 1 C charge/discharge rate and a capacity of 136 mAh g^?1 at 10 C while maintaining 87% of initial capacity over 1000 cycles. When combined with activated carbon (AC) in a full cell, an energy density and power density of 54.9 Wh kg^?1 and 1410 W kg^?1, respectively, are achieved while retaining a 90% capacity retention over 5000 cycles. The favorable rate capability, energy and power density, and durability of the electrode is attributed to the enhanced electronic and Na⁺ conductivity of the TiO₂/SCNT architecture.     

A New Family of Proton‐Conducting Electrolytes for Reversible Solid Oxide Cells: BaHfxCe0.8−xY0.1Yb0.1O3−δ

Reversible solid oxide cells based on ceramic proton conductors have potential to be the most efficient system for large‐scale energy storage. The performance and long‐term durability of these systems, however, are often limited by the ionic conductivity or stability of the proton‐conducting electrolyte. Here new family of solid oxide electrolytes, BaHf_xCe_0.8?xY_0.1Yb_0.1O_3?δ (BHCYYb), which demonstrate a superior ionic conductivity to stability trade‐off than the state‐of‐the‐art proton conductors, BaZr_xCe_0.8?xY_0.1Yb_0.1O_3?δ (BZCYYb), at similar Zr/Hf concentrations, as confirmed by thermogravimetric analysis, Raman, and X‐ray diffraction analysis of samples over 500 h of testing are reported. The increase in performance is revealed through thermodynamic arguments and first‐principle calculations. In addition, lab scale full cells are fabricated, demonstrating high peak power densities of 1.1, 1.4, and 1.6 W cm^?2 at 600, 650, and 700 °C, respectively. Round‐trip efficiencies for steam electrolysis at 1 A cm^?2 are 78%, 72%, and 62% at 700, 650, and 600 °C, respectively. Finally, CO₂? H₂O electrolysis is carried out for over 700 h with no degradation.