Precise measurements of the total concentration of atmospheric CO2 and 13CO2/12CO2 isotopic ratio using a lead-salt laser diode spectrometer

We have developed a tunable diode laser spectrometer, called SIMCO (spectrometer for isotopic measurements of CO(2)), for determining the concentrations of (12)CO(2) and (13)CO(2) in atmospheric air, from which the total concentration of CO(2) and the isotopic composition (expressed in delta units) delta(13)CO(2) are calculated. The two concentrations are measured using a pair of lines around 2290.1 cm(-1), by fitting a line profile model, taking into account the confinement narrowing effect to achieve a better accuracy. Using the Allan variance, we have demonstrated (for an integration time of 25 s) a precision of 0.1 ppmv for the total CO(2) concentration and of 0.3[per thousand] for delta(13)CO(2). The performances on atmospheric air have been tested during a 3 days campaign by comparing the SIMCO instrument with a gas chromatograph (GC) for the measurement of the total CO(2) concentration and with an isotopic ratio mass spectrometer (MS) for the isotopic composition. The CO(2) concentration measurements of SIMCO are in very good agreement with the GC data with a mean difference of Delta(CO(2))=0.16+/-1.20 ppmv for a comparison period of 45 h and the linearity of the concentration between the two instruments is also very good (slope of correlation: 0.9996+/-0.0003) over the range between 380 and 415 ppmv. For delta(13)CO(2), the comparison with the MS data shows a larger mean difference of Delta(delta(13)CO(2))=(-1.9+/-1.2)[per thousand], which could be partly related to small residual fluctuations of the overall SIMCO instrument response.     

Essential fatty acids in trout serum lipoproteins,vitellogenin and egg lipids

This paper describes evidence of (n−3) and particularly of 22∶6 (n−3) fatty acid enrichment in trout lipoproteins as well as in vitellogenin, egg lipovitellin and oil globule. Among the lipoproteins, HDL and LDL were the main forms of blood lipid transport, whereas phospholipids and cholesteryl esters are the preferential chemical carriers for (n−3) fatty acid transport. However, cholesteryl esters were less important as esterified fatty acid carriers than in man. Taken together with the data obtained in mammals, our results suggest that there may be a relationship between EFA activity and the distribution of the EFA among the lipoprotein lipid fractions in vertebrates, irrespective of the EFA series. Administration of an (n−3) fatty acid deficient diet for three months prior to trout spawning produced a significant increase in egg lipid content, primarily as a result of the increase of the oil globule composed almost exclusively of triacylglycerols. This diet decreased the 22∶6 (n−3), as well as the (n−3) fatty acid contents of lipoproteins, lipovitellin, vitellogenin and the oil globule. In contrast, the (n−3) fatty acid level was always higher in lipoproteins and lipovitellin than in the vitellogenin and the oil globule. Moreover, the relative levels of 22∶6 (n−3) and total (n−3) fatty acids were quite similar in lipoproteins and lipovitellin on the one hand, and in vitellogenin and the oil globule on the other. These findings suggest a direct relationship between the two forms of plasma lipid transport and the two egg compartments. During ovogenesis, dietary lipids seemed to be diverted from the adipose tissue and essentially deposited in the egg.     

Refractory Lining for Alumina Electrolytic Cells

This paper provides the specifications of a refractory lining for alumina electrolytic cells capable of ensuring good resistance to corrosion by the cell chemicals, while maintaining desirable thermal characteristics during service.
Several refractory materials were tested in the Alcan's standard electrolysis bath test. Also, using Alcan's standard procedures, different insulating refractory products were tested for their gain in thermal conductivity after compression.     

Fractal Characteristics of Fracture Surfaces

Quantitative fractography is often used to study material failure mechanisms. During calculation of surface or profile roughness parameters, the magnification used in obtaining fractographic data is found to influence the value of the parameters. Fractal geometry has been developed into a tool capable of defining surface and profile topography without sensitivity to magnification, and several studies have related fractal dimension ( D _F) to other physical or mechanical properties. In this study, we obtained the fractal dimension of profiled fracture surfaces of one glass and three proprietary dental porcelains. The fracture toughness ( K _1c) of these materials was also measured using the indentation-strength method. Results show the surfaces to be fractal. No quantitative relationship between fractal dimension and toughness was found. Differences in K _1c were demonstrated between some materials. It is postulated that the size range within which fractal dimension can be defined as constant is dependent on the toughening mechanism, and that the relationship between K _Ic and D _F cannot be identical for all materials.     

Hyperthermostabilization of Bacillus licheniformis{alpha}-amylase and modulation of its stability over a 50{degrees}C temperature range

Bacillus licheniformis     

Nanostructured Silicon Oxide–Nickel Oxide Sol–Gel Films with Enhanced Optical Carbon Monoxide Gas Sensitivity

Sol–gel derived silica (SiO₂) films doped with nickel oxide (NiO) nanocrystals were fabricated. A bifunctional ligand was used, bearing amine groups capable of coordinating the nickel ions and hydrolysable siloxane groups for anchoring the metal complex moiety to the silicate matrix. Nickel oxide nanocrystals precipitated at 500°C while the film was still porous. The nanocomposite films showed a reversible change in the optical transmittance in the VIS-NIR range when exposed to carbon monoxide gas. The effects of residual porosity, testing temperature, and carbon monoxide gas concentration on optical transmittance were studied.     

Use of hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs). Part 1. Influence of molecular weight and chemical modification of HTPI on the mechanical and thermal properties of PUs

New telechelic cis-1,4-polyisoprene oligomers bearing an hydroxyl group at the end of the polyisoprene backbone and possessing controlled molecular weights were used as soft segments in the elaboration of polyurethane elastomers. Besides, the well defined hydroxytelechelic cis-1,4-polyisoprene (HTPI) structure obtained through a controlled methodology, was chemically modified leading to hydrogenated and epoxidized oligomers based polyurethanes. The influence of the structural changes of these precursors on the polyurethanes properties have been studied. Thus, mechanical parameters as well as glass transition and mechanical transition temperature measurements indicated an increase in PUs hardness when the length of soft segment decreases and when the degree of epoxidized and hydrogenated isoprenic moieties increases. Moreover, based on thermogravimetric analysis (TGA), a linear relationship was established between the weight loss in the urethane stage degradation and the amount of hard segments in the PUs. Otherwise, the hydrogenated soft segments were found more thermally stable than the epoxidized and the non modified ones. By comparison with similar investigations developed from commercial oligodienes (PBHT R20 LM^® and EPOL^®), this study mainly showed that the PUs based on hydrogenated hydroxytelechelic cis-1,4-polyisoprenes were more thermally stable and softer than the EPOL^® based analogues.     

Myo-InositolTrisPyroPhosphate treatment leads to HIF-1α suppression and eradication of early hepatoma tumors in rats

Myo-inositol trispyrophosphate (ITPP), a synthetic allosteric effector of hemoglobin, increases the regulated oxygen-releasing capacity of red blood cells (RBCs), leading to suppression of hypoxia-inducible factor 1α (HIF-1α) and to down-regulation of hypoxia-inducible genes such as vascular endothelial growth factor (VEGF). As a consequence, tumor growth is markedly affected. The effect of weekly intravenous injection of ITPP on an orthotopic, syngenic rat hepatocellular carcinoma (HCC) model was compared to that for untreated animals and animals subjected to conventional Doxorubicin chemotherapy. The longitudinal examination of HCC was performed by microCT imaging, and the cellular and molecular changes were evaluated by histology and Western blotting analysis of HIF-1α, VEGF, and caspase-3 gene expression in the tumor and in the surrounding liver. Hematologic impact was evaluated by blood cell-count measurement and determination of P50 (oxygen partial pressure for a 50 % oxygen saturation of hemoglobin). The HCC evaluation by microCT revealed a high potency of ITPP for tumor growth inhibition, thus allowing long-term survival and even cure of almost all the treated animals. The P50 value of hemoglobin in RBCs underwent a shift of 30 % following ITPP injection. Under these conditions, HIF-1α activity was strongly decreased, VEGF expression was down-regulated, and apoptosis was induced in HCC and surrounding liver cells, as indicated by Caspase-3 expression. ITPP did not affect hematologic parameters during treatment. The observations of in vivo tumor eradication suggest a significant clinical potential for ITPP in cancer therapy.     

Polyphosphates and pyrophosphates of hexopyranoses as allosteric effectors of human hemoglobin: synthesis, molecular recognition, and effect on oxygen release

Polyphosphorylated and perphosphorylated hexopyranose monosaccharides and disaccharides were synthesized from parent or partially protected carbohydrates as potential allosteric effectors of hemoglobin. A study toward the construction of seven- and eight-membered cyclic pyrophosphates was also performed on the sugars which had the proper orientation, protection, and number of phosphates. All final compounds were tested for their efficiency on oxygen release from human hemoglobin. Several compounds presented higher potency than myo-inositol hexakisphosphate, which is the most efficient of the known allosteric effectors of hemoglobin. Structure-activity relationships were analyzed. The affinity and efficiency depend on the number of phosphates attached to the carbohydrate skeleton and are related primarily to the number of negative charges present. Other effects operate, but play a lesser role.     

Efficient Immobilization of Yeast Transketolase on Layered Double Hydroxides and Application for Ketose Synthesis

Transketolase (TK) from S. cerevisiae was successfully immobilized on layered double hydroxides (LDH) using simple, affordable and efficient adsorption and coprecipitation based immobilization procedures. Optimization of the preparation was performed using zinc aluminium nitrate (Zn₂Al‐NO₃) and magnesium aluminium nitrate (Mg₂Al‐NO₃) LDH as immobilization supports, and the protein‐to‐LDH weight ratio (Q) was varied. The highest immobilization yields (98–99%) and highest relative specific activities (4.2–4.4 U⋅mg⁻¹ for the immobilized enzyme compared to 4.5 U⋅mg⁻¹ for the free enzyme) were both achieved when using a protein‐to‐LDH weight ratio (Q) of 0.38. Efficient lyophilization of the LDH‐TK bionanocomposites thus synthesized was proven to allow easy use and storage of the supported TK with no significant loss of activity over a three‐month period. The kinetic parameters of the LDH‐TK enzyme were comparable to those of the free TK. The LDH‐TK enzyme was finally tested for the synthesis of L ‐erythrulose starting from hydroxypyruvate lithium salt (Li‐HPA) and glycolaldehyde (GA) as substrates. L ‐erythrulose was characterized and obtained with an isolated yield of 56% similar to that obtained with free TK. The reusability of the LDH‐TK biohybrid material was then investigated, and we found no loss of enzymatic activity over six cycles.